LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

April 2001

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:

Show Table of Contents

Subject	From	Date
Re: Gerber editor	½ðºè	Wed, 2 May 2001 19:42:43 +0800
BOW AND TWIST	<>	Wed, 4 Apr 2001 13:02:07 EDT
Re: funky stuff on white tin	<>	Mon, 9 Apr 2001 22:51:56 EDT
Re: Information on Immersion Tin PCB Surface Finish	<>	Wed, 4 Apr 2001 14:02:41 EDT
Re: Printed Wiring Boards Question	<>	Tue, 24 Apr 2001 14:33:35 EDT
Re: Process control for cleaning	<>	Mon, 30 Apr 2001 14:01:14 EDT
Re: Embrittlement	<Peter George Duncan>	Tue, 24 Apr 2001 14:53:46 +0800
Re: First Article Software	<Peter George Duncan>	Mon, 30 Apr 2001 09:32:56 +0800
Re: Gerber editor	<Peter George Duncan>	Thu, 26 Apr 2001 07:55:58 +0800
Re: High G PBAs	<Peter George Duncan>	Mon, 30 Apr 2001 16:28:55 +0800
Re: Lacing Tape	<Peter George Duncan>	Mon, 2 Apr 2001 07:54:12 +0800
Re: Loaded question...outsourcing vs. in-house manufacturing ...	<Peter George Duncan>	Wed, 25 Apr 2001 08:28:26 +0800
Re: Loaded question...outsourcing vs. in-house manufacturing...	<Peter George Duncan>	Tue, 24 Apr 2001 09:40:58 +0800
Re: Loaded question...outsourcing vs. in-house manufacturing...	<Peter George Duncan>	Wed, 25 Apr 2001 08:56:12 +0800
Re: Masking Vias	<Peter George Duncan>	Thu, 12 Apr 2001 08:52:08 +0800
Re: Minimum Spacing For SMD	<Peter George Duncan>	Wed, 25 Apr 2001 12:32:14 +0800
Re: More on outsourcing...	<Peter George Duncan>	Wed, 25 Apr 2001 14:16:55 +0800
Re: Solvent for RTV738	<Peter George Duncan>	Tue, 3 Apr 2001 13:39:48 +0800
Re: Standards for Engineering Documents	<Peter George Duncan>	Thu, 19 Apr 2001 08:13:34 +0800
Re: The standard bit inspection spec	<Peter George Duncan>	Thu, 26 Apr 2001 15:56:59 +0800
Re: The standard bit inspection spec	<Peter George Duncan>	Thu, 26 Apr 2001 16:51:09 +0800
Re: Fw: Anodising Al	<Rudy Sedlak>	Thu, 26 Apr 2001 21:14:23 EDT
Re: Cleaning test sockets	<Rudy Sedlak>	Fri, 6 Apr 2001 09:51:56 EDT
Re: Dryfilm breakdown in Ammoniacal etch	<Rudy Sedlak>	Thu, 5 Apr 2001 20:54:33 EDT
Re: ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P al...	<Rudy Sedlak>	Fri, 6 Apr 2001 13:37:01 EDT
Re: funky stuff on white tin	<Rudy Sedlak>	Mon, 9 Apr 2001 12:41:02 EDT
Re: Immersion silver boards tarnish	<Rudy Sedlak>	Mon, 9 Apr 2001 12:42:52 EDT
Re: Flux Deposition	Alan Kreplick	Mon, 2 Apr 2001 15:47:03 -0400
Minimum spacing between two BGA solder joints?	Alex L Chan	Thu, 12 Apr 2001 11:13:46 -0400
Minimum spacing between two BGA solder joints?	Alex L Chan	Mon, 16 Apr 2001 10:30:40 -0400
Re: Minimum spacing between two BGA solder joints?	Alex L Chan	Tue, 17 Apr 2001 08:32:19 -0400
Copper Areas	ANDERSON, Corky	Wed, 18 Apr 2001 15:25:01 -0700
Re: SMEMA	Anderson, Greg (IndSys, GEFanuc, NA)	Tue, 3 Apr 2001 13:20:28 -0400
Re: PCB Trace Resistance Chart	Anselmo, John	Tue, 10 Apr 2001 12:30:04 -0400
Re: No-Clean Residue	Barmuta, Mike	Fri, 13 Apr 2001 14:49:33 -0700
Re: Water Wash system justification	bbarr	Mon, 2 Apr 2001 10:54:48 -0400
Re: BOW AND TWIST	Berg, John	Fri, 6 Apr 2001 15:36:11 -0500
Re: Caps shorting on bottomside after wave...	Bev Christian	Tue, 10 Apr 2001 16:06:52 -0400
Embrittlement	Bev Christian	Mon, 16 Apr 2001 09:33:58 -0400
Re: Embrittlement	Bev Christian	Mon, 23 Apr 2001 14:23:39 -0400
Re: Flux Deposition	Bev Christian	Mon, 2 Apr 2001 15:52:33 -0400
Re: Help!	Bev Christian	Thu, 5 Apr 2001 10:10:39 -0400
Re: Measure to prevent silver MSP tarnish	Bev Christian	Wed, 11 Apr 2001 11:23:52 -0400
Re: Random absence of solder joints - update	Bev Christian	Fri, 6 Apr 2001 12:41:15 -0400
Re: Random absence of solder joints - update	Bev Christian	Fri, 6 Apr 2001 14:01:03 -0400
SIR Definition	Bev Christian	Fri, 27 Apr 2001 11:17:08 -0400
Re: SIR Definition	Bev Christian	Fri, 27 Apr 2001 12:09:49 -0400
Re: SIR Definition	Bev Christian	Fri, 27 Apr 2001 12:31:57 -0400
Re: Solvent for RTV738	Bev Christian	Tue, 3 Apr 2001 08:32:57 -0400
looking for a us board vendor doing micro vias	Bill Dworak	Mon, 30 Apr 2001 21:03:54 -0700
ESD consequences	Bissonnette, Jean-Francois	Wed, 11 Apr 2001 08:10:54 -0400
Re: Compressed Air...	Blomberg, Rainer (FL51)	Wed, 25 Apr 2001 09:28:38 -0400
Re: Help!	Bob Hawkins	Thu, 5 Apr 2001 09:33:14 -0500
Re: BGA crack- major headache	Bob Perkins	Mon, 9 Apr 2001 14:10:56 -0700
SMT Rework Reliablity	Bob Perkins	Mon, 9 Apr 2001 14:07:05 -0700
profiling	Bogdan Gabi	Sun, 1 Apr 2001 13:31:27 +0200
Re: Acrylic coating and Fluorescence	Brian Ellis	Tue, 3 Apr 2001 18:03:34 +0300
Re: Fw: Anodising Al	Brian Ellis	Fri, 27 Apr 2001 09:34:39 +0300
Re: Compressed Air...	Brian Ellis	Sat, 21 Apr 2001 10:13:17 +0300
Re: Compressed Air...	Brian Ellis	Sun, 22 Apr 2001 10:50:14 +0300
Re: Current carrying capabilities of copper traces for pulsedcurrent	Brian Ellis	Thu, 26 Apr 2001 18:53:37 +0300
Re: Dryfilm breakdown in Ammoniacal etch	Brian Ellis	Fri, 6 Apr 2001 11:45:16 +0300
Re: Help!	Brian Ellis	Thu, 5 Apr 2001 17:21:48 +0300
Re: High G PBAs	Brian Ellis	Mon, 30 Apr 2001 12:50:31 +0300
Re: Immersion silver boards tarnish	Brian Ellis	Sun, 8 Apr 2001 18:42:03 +0300
Re: Immersion silver boards tarnish	Brian Ellis	Mon, 9 Apr 2001 20:00:33 +0300
Re: No-Clean Residue	Brian Ellis	Fri, 13 Apr 2001 22:18:22 +0300
Re: SIR Definition	Brian Ellis	Fri, 27 Apr 2001 19:45:43 +0300
Re: SIR Definition	Brian Ellis	Sat, 28 Apr 2001 10:54:32 +0300
Re: The standard bit inspection spec	Brian Ellis	Thu, 26 Apr 2001 12:25:58 +0300
TDR Tester for Differential Impedance Measurements	Brian Vascukynas	Thu, 5 Apr 2001 08:46:57 -0400
Signoff Tech Net	Brown Janice	Thu, 12 Apr 2001 08:29:37 -0400
transition zone,Rigid area to flex area	Bruce Bryla	Tue, 17 Apr 2001 10:27:14 -0500
Aluminium Oxide Insulators	Buscomb, Scott	Tue, 3 Apr 2001 17:29:54 -0600
FR4 Cost: 130Tg vs 170Tg	Buscomb, Scott	Mon, 30 Apr 2001 13:07:28 -0600
AW: [TN] Loaded question...outsourcing vs. in-house manufacturing ...	Busko, Wolfgang	Tue, 24 Apr 2001 18:35:56 +0200
AW: [TN] Solder mask for touch up	Busko, Wolfgang	Tue, 3 Apr 2001 18:03:10 +0200
AW: [TN] Wave solder hold downs	Busko, Wolfgang	Wed, 11 Apr 2001 15:54:26 +0200
AW: [TN] Wave solder hold downs	Busko, Wolfgang	Thu, 12 Apr 2001 09:38:28 +0200
Re: SMEMA	Caldon W. Driscoll	Tue, 3 Apr 2001 13:32:38 -0400
Re: Yo?	Caldon W. Driscoll	Wed, 4 Apr 2001 08:52:45 -0400
Re: Blind vias - cost differential	Campbell, William (wcampbel)	Mon, 2 Apr 2001 16:02:15 -0400
Re: Caps shorting on bottomside after wave...	Campbell, William (wcampbel)	Tue, 10 Apr 2001 15:31:14 -0400
Re: Caps shorting on bottomside after wave...	Campbell, William (wcampbel)	Tue, 10 Apr 2001 16:27:28 -0400
Re: ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P alladium/Golden	Campbell, William (wcampbel)	Fri, 6 Apr 2001 10:54:22 -0400
electrovert aquajet opinions please	Campbell, William (wcampbel)	Wed, 18 Apr 2001 11:37:35 -0400
Re: First Article Software	Campbell, William (wcampbel)	Fri, 27 Apr 2001 13:21:43 -0400
funky stuff on white tin	Campbell, William (wcampbel)	Mon, 9 Apr 2001 12:05:19 -0400
Re: funky stuff on white tin	Campbell, William (wcampbel)	Mon, 9 Apr 2001 13:08:34 -0400
Re: funky stuff on white tin	Campbell, William (wcampbel)	Tue, 10 Apr 2001 09:33:36 -0400
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Campbell, William (wcampbel)	Tue, 24 Apr 2001 14:02:35 -0400
Re: Random absence of soder joints	Campbell, William (wcampbel)	Wed, 4 Apr 2001 15:56:54 -0400
Re: Random absence of solder joints - update	Campbell, William (wcampbel)	Fri, 6 Apr 2001 13:05:17 -0400
Re: Help!	Carroll, George	Thu, 5 Apr 2001 10:24:04 -0400
FET Failure Modes	Chafin, Ken G.	Tue, 3 Apr 2001 15:29:43 -0400
$850 2400 per	Charles E. McMahon	Fri, 20 Apr 2001 10:14:50 -0700
Re: ESD consequences	Christophe CROCOMBETTE	Wed, 11 Apr 2001 17:43:34 +0200
Re: Compressed Air...	Chuck Brummer	Mon, 23 Apr 2001 08:23:10 -0700
Re: Improved SlkScreen requirements	Chuck Brummer	Fri, 20 Apr 2001 10:35:02 -0700
Quest PCB: Is there anyone out there?	Clive ffitch	Tue, 10 Apr 2001 10:11:17 +0100
Re: Caps shorting on bottomside after wave...	Crepeau, Phil	Wed, 11 Apr 2001 09:11:10 -0700
Re: Measure to prevent silver MSP tarnish	Crepeau, Phil	Wed, 11 Apr 2001 11:23:47 -0700
Re: More on outsourcing...	Crepeau, Phil	Tue, 24 Apr 2001 11:30:26 -0700
Re: Fw: Reliability of exposed copper	Crepeau, Phil	Mon, 30 Apr 2001 16:24:06 -0700
Re: Aluminium Oxide Insulators	Creswick, Steven	Wed, 4 Apr 2001 17:31:22 -0400
Re: LTCC Suppliers, any ?	Creswick, Steven	Thu, 12 Apr 2001 12:05:11 -0400
Re: Moisture sensitivity	Creswick, Steven	Wed, 4 Apr 2001 17:21:32 -0400
Re: What companies can grind ceramic ferrule blanks	Creswick, Steven	Mon, 23 Apr 2001 09:59:53 -0400
Re: Moisture sensitivity	Cyker, Howard A (Howie)	Mon, 2 Apr 2001 14:06:45 -0400
Re: Gerber editor	d. terstegge	Wed, 25 Apr 2001 17:58:58 +0200
Re: Loaded question...outsourcing vs. in-house manufacturing...	d. terstegge	Tue, 24 Apr 2001 14:36:06 +0200
Re: Masking Vias	d. terstegge	Tue, 10 Apr 2001 17:52:52 +0200
Re: Vias under BGA's - Tented or Not??	d. terstegge	Fri, 20 Apr 2001 10:16:21 +0200
Re: Best Value CCD camera	D.Terstegge	Sat, 28 Apr 2001 10:52:03 +0200
Re: First Article Software	D.Terstegge	Sun, 29 Apr 2001 22:23:00 +0200
Gerber editor	Danny W. Harkins	Wed, 25 Apr 2001 10:35:24 -0400
Re: Best Value CCD camera	Darrel Therriault	Mon, 30 Apr 2001 14:12:44 -0700
Re: Shipping Damage on SMT components	Darrel Therriault	Wed, 18 Apr 2001 07:54:57 -0700
Re: SIR Definition	Dave Kell	Fri, 27 Apr 2001 10:33:39 -0500
Re: ESD consequences	David Fish	Wed, 11 Apr 2001 10:23:28 -0700
Re: Help!	David Fish	Thu, 5 Apr 2001 16:03:50 -0700
Re: Help! Still on the road	David Fish	Mon, 16 Apr 2001 20:54:36 -0700
Re: PCB market size (area/weight v. $)	David Fish	Wed, 18 Apr 2001 22:43:36 -0700
Planning For Compliance Witj Lead TRI	David Fish	Tue, 24 Apr 2001 15:15:13 -0700
Re: telephone number request	David Fish	Mon, 16 Apr 2001 18:12:04 -0700
Re: Embrittlement	David Hillman	Mon, 23 Apr 2001 11:54:03 -0500
Re: Embrittlement	David Hillman	Mon, 23 Apr 2001 13:07:49 -0500
Re: Flip Chip Sample Preparation for Cross Section	David Hillman	Mon, 23 Apr 2001 16:09:26 -0500
PCB market size (area/weight v. $)	David Whalley	Wed, 18 Apr 2001 15:53:55 +0200
Immersion silver boards tarnish	David	Mon, 9 Apr 2001 10:53:16 +0800
Re: Immersion silver boards tarnish	David	Tue, 10 Apr 2001 12:25:58 +0800
Re: Immersion silver boards tarnish	David	Tue, 10 Apr 2001 12:29:42 +0800
Measure to prevent silver MSP tarnish	David	Thu, 12 Apr 2001 10:02:23 +0800
Lab Wizard used in multiuser mode?	Denis Dionne	Wed, 25 Apr 2001 11:56:45 -0400
Re: Solder mask for touch up	Dennis Fritz	Wed, 4 Apr 2001 00:51:55 EDT
FR4	Dieselberg, Ron	Wed, 11 Apr 2001 11:23:13 -0400
Re: Lacing Tape	Dieselberg, Ron	Mon, 2 Apr 2001 13:48:13 -0400
Re: Help!	Don Vischulis	Thu, 5 Apr 2001 09:38:32 -0600
Re: Looking for US board vendors doing microvias	Don Wright	Mon, 30 Apr 2001 07:01:06 -0700
Acrylic coating and Fluorescence	Douglas Pauls	Tue, 3 Apr 2001 09:25:18 -0500
Acrylics and Silicones	Douglas Pauls	Tue, 3 Apr 2001 09:33:24 -0500
Re: Caps shorting on bottomside after wave...	Douglas Pauls	Tue, 10 Apr 2001 14:41:55 -0500
Re: Cleaning test sockets	Douglas Pauls	Fri, 6 Apr 2001 08:08:20 -0500
Re: Help!	Douglas Pauls	Thu, 5 Apr 2001 10:03:45 -0500
Re: Help!	Douglas Pauls	Thu, 5 Apr 2001 15:45:23 -0500
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Douglas Pauls	Tue, 24 Apr 2001 08:54:39 -0500
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Douglas Pauls	Wed, 25 Apr 2001 12:33:01 -0500
Re: Measure to prevent silver MSP tarnish	Douglas Pauls	Wed, 11 Apr 2001 14:31:19 -0500
Re: SIR Definition	Douglas Pauls	Fri, 27 Apr 2001 11:35:37 -0500
Re: Yo?	Douglas Pauls	Wed, 4 Apr 2001 07:19:16 -0500
High G PBAs	DUTTON Phil	Mon, 30 Apr 2001 17:50:11 +1000
Re: Standards for Engineering Documents	DUTTON Phil	Thu, 19 Apr 2001 10:21:00 +1000
Re: ISO-9001:2000 documentation	Earl Moon	Tue, 24 Apr 2001 15:01:47 -0400
Re: Minimum Spacing For SMD	Earl Moon	Tue, 24 Apr 2001 15:15:27 -0400
Re: [DC] Blind and Buried Vias	Earl Moon	Wed, 4 Apr 2001 13:57:17 -0500
Re: SIR Definition	Ed Cosper	Fri, 27 Apr 2001 12:05:08 -0400
Re: Loaded question...outsourcing vs. in-house manufacturing...	Ed Valentine	Mon, 23 Apr 2001 21:36:30 -0400
Re: TDR Tester for Differential Impedance Measurements	Eric Bogatin	Thu, 5 Apr 2001 09:57:25 -0500
Baking flexes prior to hot bar fixing	Eric Christison	Mon, 16 Apr 2001 10:23:35 -0500
Re: Best Value CCD camera	Eric Christison	Sat, 28 Apr 2001 05:21:09 -0500
Re: High G PBAs	Eric Christison	Mon, 30 Apr 2001 03:00:27 -0500
Melting Point of Steel	Eric Christison	Thu, 5 Apr 2001 18:33:36 -0500
Dryfilm breakdown in Ammoniacal etch	Eric Masters	Thu, 5 Apr 2001 13:10:02 EDT
Improved SlkScreen requirements	F.Pitzl	Thu, 19 Apr 2001 20:38:32 +0200
Bow and twist	Flatfield, Cadcam	Mon, 23 Apr 2001 16:24:02 +0200
Re: Humidity and temperature specification	Francis Sun	Thu, 12 Apr 2001 12:16:34 -0400
Re: Inkjet / Laser Marking system for printed circuit board recommendations	Francis Sun	Wed, 4 Apr 2001 09:13:17 -0400
What is the recommended relative humidity for a electronic manufacturing facility?	Francis Sun	Thu, 12 Apr 2001 09:16:09 -0400
SV: [TN] Dryfilm breakdown in Ammoniacal etch	Franco Vezzoli	Fri, 6 Apr 2001 10:19:47 +0200
Humidity and temperature specification	Francois Monette	Fri, 13 Apr 2001 08:11:01 -0400
Re: Caps shorting on bottomside after wave...	Furrow, Robert Gordon (Bob)	Tue, 10 Apr 2001 15:50:14 -0400
Re: Immersion silver boards tarnish	Furrow, Robert Gordon (Bob)	Mon, 9 Apr 2001 09:31:30 -0400
Re: Help!	Galang, Jerry	Thu, 5 Apr 2001 07:35:48 -0700
SNEC meeting	Gary Ferrari	Mon, 9 Apr 2001 17:19:20 EDT
Re: Low Aspect Via definition	Gary McCauley	Tue, 3 Apr 2001 10:17:26 -0500
Re: Water Wash system justification	Gary McCauley	Mon, 2 Apr 2001 09:07:46 -0500
Re: Comparative Tracking Index.	Geoff Layhe	Fri, 6 Apr 2001 09:15:18 +0100
Re: FR4	Geoff Layhe	Wed, 11 Apr 2001 17:37:55 +0100
Re: Laboratory for tests on PCB	Geoff Layhe	Thu, 12 Apr 2001 10:38:00 +0100
telephone number request	Gerard O'Brien	Fri, 13 Apr 2001 10:09:15 -0400
Re: Caps shorting on bottomside after wave...	gleason	Tue, 10 Apr 2001 14:34:52 -0700
Re: More on outsourcing...	gleason	Tue, 24 Apr 2001 14:11:16 -0700
Re: Wave solder hold downs	gleason	Wed, 11 Apr 2001 09:22:39 -0700
LTCC Suppliers, any ?	Goh Guan Chye	Thu, 12 Apr 2001 10:44:30 +0800
Re: Process control for cleaning	Graham Collins	Mon, 30 Apr 2001 14:10:11 -0400
TO-220 forming	Graham Collins	Fri, 6 Apr 2001 11:09:21 -0400
Re: Acrylic coating and Fluorescence	Graham Naisbitt	Wed, 4 Apr 2001 09:15:56 +0100
Re: Acrylics and Silicones	Graham Naisbitt	Wed, 4 Apr 2001 09:16:01 +0100
Re: Caps shorting on bottom side ( another question )	Gregg Klawson	Wed, 11 Apr 2001 16:04:35 -0400
Antw: [TN] Best Value CCD camera	Guenter Grossmann	Fri, 27 Apr 2001 09:11:08 +0200
Antw: [TN] Laboratory for tests on PCB	Guenter Grossmann	Thu, 12 Apr 2001 14:38:01 +0200
Re: Current carrying capabilities of copper traces for pulsed current	Guy Ramsey	Thu, 26 Apr 2001 10:45:54 -0400
Re: Dispenser for dry powder	Guy Ramsey	Tue, 3 Apr 2001 08:28:29 -0400
Re: Dispenser for dry powder	Guy Ramsey	Wed, 4 Apr 2001 13:00:25 -0400
Re: Help!	Guy Ramsey	Fri, 6 Apr 2001 08:48:35 -0400
Re: IPC-A-600 : mealsing defect	Guy Ramsey	Tue, 24 Apr 2001 07:52:08 -0400
Re: Low Aspect Via definition	Guy Ramsey	Tue, 3 Apr 2001 10:21:07 -0400
SMEMA	Hamilton, Richard CLE 4454	Tue, 3 Apr 2001 09:54:23 -0700
Re: SMT Reel standards	Hamilton, Richard CLE 4454	Mon, 2 Apr 2001 13:39:15 -0700
Re: Minimum spacing between two BGA solder joints?	Hann Pang	Tue, 17 Apr 2001 09:07:42 -0500
Moisture sensitivity	Hann Pang	Mon, 2 Apr 2001 12:01:50 -0500
Re: Flux Deposition	Hans Hinners	Mon, 2 Apr 2001 12:48:52 -0700
Re: SIR Definition	Hans Shin	Fri, 27 Apr 2001 08:31:21 -0700
SMT Reel standards	Harkins, Danny [CSI/KNOX]	Mon, 2 Apr 2001 15:37:07 -0500
Re: Standards for Engineering Documents	Hiteshew, Michael	Wed, 18 Apr 2001 12:47:43 -0400
Re: Vias under BGA's - Tented or Not??	Hiteshew, Michael	Thu, 19 Apr 2001 13:08:31 -0400
RE: Outsourcing/EMS	Hollandsworth, Ron	Wed, 25 Apr 2001 09:24:27 -0500
Chip Component Misalignment	Hooper Doug	Thu, 12 Apr 2001 14:36:00 -0400
Looking for US board vendors doing microvias	Houston, Terri	Mon, 30 Apr 2001 08:47:20 -0500
Re: Best Value CCD camera	Ian Hanna	Mon, 30 Apr 2001 15:08:02 -0400
Re: The standard bit inspection spec	Ian Hanna	Thu, 26 Apr 2001 13:11:29 -0400
AuSn soldering on Silver	Ingemar Hernefjord (EMW)	Fri, 6 Apr 2001 12:42:50 +0200
Re: AuSn soldering on Silver	Ingemar Hernefjord (EMW)	Fri, 6 Apr 2001 16:53:41 +0200
Re: AuSn soldering on Silver	Ingemar Hernefjord (EMW)	Mon, 9 Apr 2001 15:31:58 +0200
Re: Embrittlement	Ingemar Hernefjord (EMW)	Tue, 24 Apr 2001 08:31:27 +0200
Re: Embrittlement	Ingemar Hernefjord (EMW)	Tue, 24 Apr 2001 11:16:27 +0200
Re: Embrittlement	Ingemar Hernefjord (EMW)	Wed, 25 Apr 2001 09:07:12 +0200
Re: Help!	Ingemar Hernefjord (EMW)	Thu, 5 Apr 2001 16:13:41 +0200
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Ingemar Hernefjord (EMW)	Tue, 24 Apr 2001 17:39:59 +0200
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Ingemar Hernefjord (EMW)	Wed, 25 Apr 2001 08:49:43 +0200
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Ingemar Hernefjord (EMW)	Wed, 25 Apr 2001 13:52:25 +0200
Re: Rejected posting to [log in to unmask]	Isaacson, Lynn	Mon, 30 Apr 2001 19:27:15 -0700
Re: $850 2400 per	Jack Crawford	Fri, 20 Apr 2001 13:47:13 -0500
Re: Minimum spacing between two BGA solder joints?	Jack Crawford	Tue, 17 Apr 2001 09:57:06 -0500
Availability of IPC-4101	James W. High	Wed, 4 Apr 2001 15:22:20 -0400
First Article Software	Jason Gregory	Fri, 27 Apr 2001 10:23:52 -0500
Re: First Article Software	Jason Gregory	Fri, 27 Apr 2001 11:13:01 -0500
Re: Loaded question...outsourcing vs. in-house manufacturing...	Jason Gregory	Wed, 25 Apr 2001 09:36:27 -0500
Hard Disk Drive Companies - Phils	Jay Bitanga	Thu, 5 Apr 2001 17:29:22 +0800
IPC/DC Boston area meeting, 24-Apr 6pm	Jeff Seeger	Tue, 17 Apr 2001 14:05:18 -0400
Re: No technical content...Bobby Hamilton..	Jeff Seeger	Sun, 22 Apr 2001 19:38:37 -0400
Re: Help!	Jerry Mosur	Thu, 5 Apr 2001 10:21:00 -0400
Masking Vias	Jerry Mosur	Tue, 10 Apr 2001 10:03:09 -0400
Re: Compressed Air...	Jim Axton	Sat, 21 Apr 2001 10:40:52 -0700
Re: TechNet Digest - 29 Mar 2001 to 30 Mar 2001 - Special issue (#2001-193)	Jim Wertin	Tue, 3 Apr 2001 07:54:39 -0400
Re: Solder mask for touch up	JinSee Goh	Wed, 4 Apr 2001 15:29:26 +0800
Re: FR4 Cost: 130Tg vs 170Tg	John J Walker	Tue, 1 May 2001 04:48:11 -0400
Re: Improved SlkScreen requirements	John Parsons	Thu, 19 Apr 2001 11:53:30 -0700
Re: PCB Trace Resistance Chart	John Parsons	Tue, 10 Apr 2001 09:11:10 -0700
Re: Standards for Engineering Documents	John Parsons	Wed, 18 Apr 2001 09:47:30 -0700
Re: TDR Tester for Differential Impedance Measurements	John Parsons	Thu, 5 Apr 2001 07:48:02 -0700
Pasty Range	Jonathan A Noquil	Wed, 4 Apr 2001 18:09:26 +0800
Solder Paste Vendor	Jonathan A Noquil	Wed, 4 Apr 2001 18:41:23 +0800
Caps shorting on bottom side ( another question )	Jorge Santana	Tue, 10 Apr 2001 16:34:46 -0500
Re: Help!	Jorge Santana	Thu, 5 Apr 2001 14:03:13 -0500
Re: Humidity and temperature specification	Jorge Santana	Mon, 16 Apr 2001 09:00:11 -0500
Re: Moisture sensitivity	Jorge Santana	Mon, 2 Apr 2001 12:21:34 -0500
emc simulation	Joseph Keary	Tue, 10 Apr 2001 16:11:58 -0700
Re: Help!	Julien Bouchard	Thu, 5 Apr 2001 10:20:27 -0400
Solder mask for touch up	Julien Bouchard	Tue, 3 Apr 2001 11:46:56 -0400
Re: ISO-9001:2000 documentation	Kari Rambo	Tue, 24 Apr 2001 14:20:13 -0500
Re: Lacing Tape	Kasprzak, Bill (sys) USX	Mon, 2 Apr 2001 07:49:37 -0400
Re: 610 Change History	Kathy Kuhlow	Thu, 19 Apr 2001 16:55:56 -0500
Re: Caps shorting on bottomside after wave...	Kathy Kuhlow	Tue, 10 Apr 2001 14:37:31 -0500
Re: Chip Component Misalignment	Kathy Kuhlow	Thu, 12 Apr 2001 15:30:58 -0500
Re: First Article Software	Kathy Kuhlow	Fri, 27 Apr 2001 10:51:20 -0500
Re: Loaded question...outsourcing vs. in-house manufacturing...	Kathy Kuhlow	Tue, 24 Apr 2001 11:02:02 -0500
Re: SMT Rework Reliablity	Kathy Kuhlow	Mon, 9 Apr 2001 16:35:56 -0500
Re: Solder mask for touch up	Kathy Kuhlow	Tue, 3 Apr 2001 12:08:26 -0500
Re: transition zone,Rigid area to flex area	Kathy Kuhlow	Tue, 17 Apr 2001 16:08:25 -0500
PCB Trace Resistance Chart	Kaye Knotts	Tue, 10 Apr 2001 10:59:12 -0400
Re: IPC Position Paper on Halogen-Free Electronics Available for Free Download	Keach Sasamori	Wed, 11 Apr 2001 16:38:38 -0500
Re: Acrylics and Silicones	Keith Calhoun	Tue, 3 Apr 2001 11:12:24 -0500
Kelly Kovalovsky/Endicott/IBM is out of the office.	Kelly Kovalovsky	Sat, 14 Apr 2001 01:39:22 -0400
Re: Shipping Damage on SMT components	Kelly M. Schriver	Wed, 18 Apr 2001 17:00:01 -0500
Dispenser for dry powder	Ken Fong	Tue, 3 Apr 2001 10:56:17 +0800
Re: Dispenser for dry powder	Ken Fong	Wed, 4 Apr 2001 08:42:35 +0800
Toroid winding	Ken Fong	Thu, 5 Apr 2001 17:18:33 +0800
Fw: Anodising Al	Ken Mc Gowan	Thu, 26 Apr 2001 16:54:42 -0100
Re: Dryfilm breakdown in Ammoniacal etch	Ken Mc Gowan	Sat, 7 Apr 2001 13:02:51 -0100
Re: Immersion silver boards tarnish	Ken Mc Gowan	Mon, 9 Apr 2001 13:49:18 -0100
Fw: Mail System Error - Returned Mail	Ken Mc Gowan	Fri, 20 Apr 2001 22:39:12 -0100
Re: SIR Definition	Ken Mc Gowan	Mon, 30 Apr 2001 23:29:20 -0100
Tin	Ken Mc Gowan	Mon, 30 Apr 2001 16:34:39 -0100
Re: Caps shorting on bottom side after wave...	Ken Patel	Tue, 10 Apr 2001 12:51:08 -0700
Re: Caps shorting...thanks everyone!!	Ken Patel	Tue, 10 Apr 2001 15:01:02 -0700
ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P alladium/Golden	Ken Patel	Thu, 5 Apr 2001 17:21:10 -0700
Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch .	Ken Patel	Tue, 17 Apr 2001 19:28:44 -0700
Re: Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch .	Ken Patel	Wed, 18 Apr 2001 14:58:36 -0700
Looking For Assembly House	Lam, Patrick	Fri, 27 Apr 2001 13:37:18 -0700
Minimum Spacing For SMD	Lam, Patrick	Tue, 24 Apr 2001 09:25:58 -0700
Re: component orientation problems when in stick format	Larry Koens	Wed, 25 Apr 2001 15:36:06 -0500
Process for RF PCB on Al Plate?	lckang	Wed, 18 Apr 2001 13:13:32 +0800
Re: Laboratory for tests on PCB	Lee Whiteman	Thu, 12 Apr 2001 22:57:14 -0400
Package Characterization Labs	LI YUAN	Thu, 12 Apr 2001 11:23:30 -0600
Re: Immersion silver boards tarnish	Lisa Angle	Mon, 9 Apr 2001 09:23:35 -0400
Re: Caps shorting on bottomside after wave...	Lou Hart	Wed, 11 Apr 2001 13:40:55 -0400
Process control for cleaning	Lou Hart	Mon, 30 Apr 2001 13:35:03 -0400
Re: Cleaning test sockets	Louis, Edwin @ CSE	Fri, 6 Apr 2001 15:55:50 -0400
Laboratory for tests on PCB	Luca Amato	Thu, 12 Apr 2001 04:39:36 -0400
IPC-A-600 : mealsing defect	Lum Wee Mei	Tue, 24 Apr 2001 15:41:25 +0800
Re: Gerber editor	Mark Charlton	Wed, 25 Apr 2001 11:37:37 -0400
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Marsico, James	Tue, 24 Apr 2001 06:54:37 -0400
More on outsourcing...	Marsico, James	Tue, 24 Apr 2001 14:01:31 -0400
610 Change History	Marty Brooks	Thu, 19 Apr 2001 13:53:28 -0700
Current carrying capabilities of copper traces for pulsed current	May William D (Dean) CNIN	Thu, 26 Apr 2001 08:37:33 -0500
Re: Gerber editor	McMahan, Lisa E (FL51)	Wed, 25 Apr 2001 11:08:42 -0400
Re: Acrylics and Silicones	Michael Castro	Wed, 4 Apr 2001 02:59:19 -0700
Re: Help!	Michael Castro	Thu, 5 Apr 2001 23:45:18 -0700
Re: Water Wash system justification	Michael Castro	Mon, 2 Apr 2001 01:16:37 -0700
Re: Who makes long life press pads (as press buffer)?	Michael Flett	Sun, 15 Apr 2001 06:29:25 -0500
Re: Caps shorting on bottom side ( another question )	Michael Forrester	Wed, 11 Apr 2001 10:25:45 -0400
Re: Gerber editor	Michael Kuczynski	Wed, 25 Apr 2001 10:05:33 -0500
Low Aspect Via definition	Michael Simms	Tue, 3 Apr 2001 08:33:57 -0500
Surface Finish	Mike Bailey	Mon, 9 Apr 2001 09:39:16 -0700
Solder Peaks...	Mike Di Giacomo	Mon, 30 Apr 2001 17:08:50 -0500
Re: Best Value CCD camera	Mike Fenner	Sat, 28 Apr 2001 10:30:28 +0100
Re: Compressed Air...	Mike Fenner	Sun, 22 Apr 2001 12:50:25 +0100
Re: Embrittlement	Mike Fenner	Tue, 24 Apr 2001 08:02:32 +0100
Re: Embrittlement	Mike Fenner	Tue, 24 Apr 2001 17:56:14 +0100
Re: More on outsourcing...	Mike Fenner	Tue, 24 Apr 2001 20:18:32 +0100
Re: Solder Paste Vendor	Mike Fenner	Wed, 4 Apr 2001 22:31:12 +0100
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Misner, Bruce	Tue, 24 Apr 2001 08:27:11 -0500
Re: Shipping Damage on SMT components	Neil Lockley	Wed, 18 Apr 2001 15:23:21 +0100
Re: [DC] Blind and Buried Vias	Olson, Jack	Tue, 3 Apr 2001 12:44:56 -0500
Re: Connection of vias to planes	Paul Fly	Mon, 30 Apr 2001 12:01:46 -0400
Re: Vias under BGA's - Tented or Not??	Paul Fly	Thu, 19 Apr 2001 13:55:48 -0400
No-Clean Residue	Paul Gill	Fri, 13 Apr 2001 09:34:07 -0700
Re: No-Clean Residue..... thanks	Paul Gill	Fri, 13 Apr 2001 17:57:17 -0700
Re: BOW AND TWIST	Paul Peltier	Wed, 4 Apr 2001 03:02:07 -0400
Re: Caps shorting on bottomside after wave...	Pelkey, Glenn	Wed, 11 Apr 2001 09:50:36 -0700
Flip Chip Sample Preparation for Cross Section	Pelkey, Glenn	Mon, 23 Apr 2001 11:29:59 -0700
Re: Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch .	Pelkey, Glenn	Wed, 18 Apr 2001 08:49:51 -0700
Re: Shipping Damage on SMT components	Pelkey, Glenn	Wed, 18 Apr 2001 08:21:42 -0700
Re: Help!	Phil Crepeau	Thu, 5 Apr 2001 07:41:59 -0700
Re: Water Wash system justification	Phil Crepeau	Mon, 2 Apr 2001 08:12:13 -0700
Re: Aluminium Oxide Insulators	Phil Nutting	Wed, 4 Apr 2001 13:22:03 -0400
Re: Compressed Air...	Phil Nutting	Mon, 23 Apr 2001 08:56:13 -0400
ISO-9001:2000 documentation	Phil Nutting	Tue, 24 Apr 2001 14:46:45 -0400
Re: Water Wash system justification	Phil Nutting	Mon, 2 Apr 2001 09:09:12 -0400
Re: Moisture sensitivity	Phil Zarrow	Mon, 2 Apr 2001 14:48:26 EDT
Re: ELECTROLESS Nickel/Immersion gold v/s with Electroplated Nickel/P al...	Phillip E. Hinton	Fri, 6 Apr 2001 12:24:42 EDT
Re: Minimum spacing between two BGA solder joints?	pratap	Mon, 16 Apr 2001 21:47:24 -0700
SMT Pad Repair	Raul Cantero	Mon, 9 Apr 2001 09:36:33 -0500
Blind vias - cost differential	Ray Humphrey	Sun, 1 Apr 2001 10:49:12 -0700
Re: Blind vias - cost differential	Ray Humphrey	Mon, 2 Apr 2001 20:58:27 -0700
Re: Low Aspect Via definition	Ray Humphrey	Tue, 3 Apr 2001 07:38:05 -0700
Re: Low Aspect Via definition	Ray Humphrey	Tue, 3 Apr 2001 08:01:20 -0700
Re: Low Aspect Via definition	Ray Humphrey	Wed, 4 Apr 2001 21:46:42 -0700
Re: [DC] Blind and Buried Vias	Ray Humphrey	Wed, 4 Apr 2001 08:26:14 -0700
Shipping Damage on SMT components	Rich Lasko	Wed, 18 Apr 2001 08:40:38 -0500
Standards for Engineering Documents	Rich Lasko	Wed, 18 Apr 2001 11:24:05 -0500
Re: Availability of IPC-4101	Rick Howieson	Wed, 4 Apr 2001 13:37:47 -0600
Re: Help!	Rick Howieson	Thu, 5 Apr 2001 07:59:47 -0600
Paste Thickness	Rick Howieson	Wed, 18 Apr 2001 09:21:30 -0600
Re: Compressed Air...	Rick Thompson	Sat, 21 Apr 2001 06:36:51 -0700
Vias under BGA's - Tented or Not??	Rick Thompson	Thu, 19 Apr 2001 07:46:23 -0700
Re: Vias under BGA's - Tented or Not??	Rick Thompson	Thu, 19 Apr 2001 12:03:54 -0700
Flux Deposition	Rougeux, Scott	Mon, 2 Apr 2001 14:27:50 -0500
Wave solder hold downs	Rougeux, Scott	Wed, 11 Apr 2001 08:42:55 -0500
What companies can grind ceramic ferrule blanks	Russell Epstein	Fri, 20 Apr 2001 14:26:18 -0500
Re: Help!	Ryan Grant	Thu, 5 Apr 2001 11:36:15 -0600
Re: Paste Thickness	Ryan Grant	Thu, 19 Apr 2001 09:42:25 -0600
Re: Vias under BGA's - Tented or Not??	Ryan Grant	Thu, 19 Apr 2001 13:00:22 -0600
Re: Flux Deposition	Samuel.Ares	Mon, 2 Apr 2001 15:51:00 -0400
Re: Help!	Sauer, Steven T.	Thu, 5 Apr 2001 10:24:09 -0400
Re: RF Assembly Issues	Sauer, Steven T.	Mon, 2 Apr 2001 07:51:50 -0400
Printed Wiring Boards Question	Scott Duhamel	Tue, 24 Apr 2001 12:37:06 -0500
Re: Process control for cleaning	Scott Duhamel	Mon, 30 Apr 2001 13:45:54 -0400
saving orcad files	Scott Rebman	Fri, 20 Apr 2001 14:57:32 -0700
Re: Dryfilm breakdown in Ammoniacal etch	sean clinton	Fri, 6 Apr 2001 07:32:33 -0500
Re: Quest PCB: Is there anyone out there?	Seth Goodman	Wed, 11 Apr 2001 11:44:25 -0500
Re: BOW AND TWIST	Shawn Murphy	Wed, 4 Apr 2001 10:21:19 -0700
Re: Caps shorting on bottomside after wave...	Shawn Murphy	Tue, 10 Apr 2001 13:32:21 -0700
Re: Caps shorting on bottomside after wave...	Shawn Murphy	Tue, 10 Apr 2001 13:42:32 -0700
Re: Caps shorting on bottomside after wave...	Shawn Murphy	Tue, 10 Apr 2001 14:13:32 -0700
Re: Masking Vias	Shawn Murphy	Tue, 10 Apr 2001 07:42:13 -0700
Re: Minimum spacing between two BGA solder joints?	Shawn Murphy	Tue, 17 Apr 2001 06:03:26 -0700
Re: Random absence of soder joints	Shawn Murphy	Wed, 4 Apr 2001 12:12:07 -0700
Re: Random absence of soder joints	Shawn Murphy	Wed, 4 Apr 2001 13:43:14 -0700
Temperature Delta's During reflow	Shawn Murphy	Wed, 4 Apr 2001 08:12:01 -0700
Information on Immersion Tin PCB Surface Finish	Simon Howells	Wed, 4 Apr 2001 12:47:34 +1000
Re: LTCC Suppliers, any ?	SL Chan	Thu, 12 Apr 2001 12:25:49 +0800
Re: Best Value CCD camera	Smith Russell PO US	Fri, 27 Apr 2001 17:43:11 +0200
Re: Improved SlkScreen requirements	Smith Russell PO US	Fri, 20 Apr 2001 21:24:42 +0200
Re: Minimum Spacing For SMD	Smith-BCD, Richard	Tue, 24 Apr 2001 14:57:40 -0500
Re: Water Wash system justification	Sprowles, Jol	Mon, 2 Apr 2001 08:00:31 -0400
Re: Water Wash system justification	Sprowles, Jol	Mon, 2 Apr 2001 09:27:41 -0400
Deadlines	Stephannie Caliendo	Thu, 5 Apr 2001 14:49:47 -0500
Re: Laboratory for tests on PCB	Stephen Brown	Thu, 12 Apr 2001 10:12:08 +0100
Re: Paste Thickness	Stephen Brown	Wed, 18 Apr 2001 16:51:07 +0100
Caps shorting on bottomside after wave...	Stephen R. Gregory	Tue, 10 Apr 2001 15:12:05 EDT
Re: Caps shorting on bottomside after wave...	Stephen R. Gregory	Tue, 10 Apr 2001 17:00:43 EDT
Caps shorting...thanks everyone!!	Stephen R. Gregory	Tue, 10 Apr 2001 17:53:00 EDT
Re: Caps shorting...thanks everyone!!	Stephen R. Gregory	Tue, 10 Apr 2001 19:16:01 EDT
Compressed Air...	Stephen R. Gregory	Fri, 20 Apr 2001 23:31:09 EDT
Re: Compressed Air...	Stephen R. Gregory	Sat, 21 Apr 2001 22:46:02 EDT
Re: ESD consequences	Stephen R. Gregory	Wed, 11 Apr 2001 08:59:57 EDT
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Stephen R. Gregory	Tue, 24 Apr 2001 21:15:39 EDT
Loaded question...outsourcing vs. in-house manufacturing...	Stephen R. Gregory	Mon, 23 Apr 2001 20:25:13 EDT
Re: Looking for BGA sockets for 304 balls 31mm-TBGA with 50 mil pitch .	Stephen R. Gregory	Tue, 17 Apr 2001 23:16:32 EDT
March 2001 Book-to-Bill Ratios...	Stephen R. Gregory	Fri, 27 Apr 2001 20:48:21 EDT
Re: Masking Vias	Stephen R. Gregory	Tue, 10 Apr 2001 10:32:25 EDT
Re: Minimum spacing between two BGA solder joints?	Stephen R. Gregory	Mon, 16 Apr 2001 20:58:35 EDT
Re: Moisture sensitivity	Stephen R. Gregory	Mon, 2 Apr 2001 13:47:43 EDT
My humble thanks...	Stephen R. Gregory	Tue, 24 Apr 2001 19:06:11 EDT
No technical content	Stephen R. Gregory	Tue, 3 Apr 2001 20:24:23 EDT
No technical content	Stephen R. Gregory	Tue, 3 Apr 2001 17:43:24 EDT
No technical content...Bobby Hamilton..	Stephen R. Gregory	Sun, 22 Apr 2001 16:17:13 EDT
Re: No technical content...Bobby Hamilton..	Stephen R. Gregory	Sun, 22 Apr 2001 20:24:53 EDT
No Technical content...Marshmallow Easter Bunnies...	Stephen R. Gregory	Fri, 13 Apr 2001 16:54:04 EDT
Re: Random absence of soder joints	Stephen R. Gregory	Wed, 4 Apr 2001 17:53:51 EDT
Re: Fw: Reliability of exposed copper	Stephen R. Gregory	Sun, 29 Apr 2001 13:09:55 EDT
Re: Fw: Reliability of exposed copper	Stephen R. Gregory	Mon, 30 Apr 2001 21:56:18 EDT
Re: TO-220 forming	Stephen R. Gregory	Fri, 6 Apr 2001 12:07:03 EDT
Yo?	Stephen R. Gregory	Tue, 3 Apr 2001 21:46:54 EDT
Ionic Testing	Steve Challis	Mon, 30 Apr 2001 15:16:33 -0500
P-CAD files for translation	Steve Collins	Mon, 9 Apr 2001 08:43:08 -0600
Best Value CCD camera	Steve Joy	Thu, 26 Apr 2001 17:04:56 -0700
Re: Masking Vias	Steve Joy	Tue, 10 Apr 2001 07:37:30 -0700
Re: Baking flexes prior to hot bar fixing	Steve Kelly	Mon, 16 Apr 2001 11:51:25 -0400
Re: Toroid winding	Steve Kelly	Fri, 6 Apr 2001 12:07:51 -0400
Current vs trace cross section ratio	Tamir Ben Shoshan	Thu, 12 Apr 2001 10:57:37 +0300
Comparative Tracking Index.	tech	Thu, 5 Apr 2001 12:51:43 -0400
Re: emc simulation	Ted Tontis	Wed, 11 Apr 2001 08:05:03 -0500
Re: Masking Vias	Ted Tontis	Tue, 10 Apr 2001 10:08:44 -0500
Re: Vias under BGA's - Tented or Not??	Ted Tontis	Thu, 19 Apr 2001 10:26:04 -0500
Connection of vias to planes	Tempea, Ioan	Mon, 30 Apr 2001 09:34:01 -0400
Random absence of soder joints	Tempea, Ioan	Wed, 4 Apr 2001 14:43:24 -0400
Re: Random absence of soder joints	Tempea, Ioan	Wed, 4 Apr 2001 16:20:43 -0400
Random absence of solder joints - update	Tempea, Ioan	Fri, 6 Apr 2001 12:24:31 -0400
Re: Random absence of solder joints - update	Tempea, Ioan	Fri, 6 Apr 2001 13:24:43 -0400
component orientation problems when in stick format	Tenison Stone	Wed, 25 Apr 2001 14:56:28 -0500
Re: Looking for US board vendors doing microvias	Thomas Waznis	Mon, 30 Apr 2001 19:51:16 +0000
Re: Help!	Thorup, John	Thu, 5 Apr 2001 07:42:02 -0700
Re: Random absence of soder joints	Thorup, John	Wed, 4 Apr 2001 16:00:31 -0700
Re: Caps shorting on bottomside after wave...	Tim Ramsey	Tue, 10 Apr 2001 13:50:36 -0700
Re: Best Value CCD camera	Timothy Reeves	Mon, 30 Apr 2001 11:12:30 -0700
Re: Comparative Tracking Index.	Timothy Reeves	Fri, 6 Apr 2001 12:04:10 -0700
Re: Help!	Timothy Reeves	Thu, 5 Apr 2001 17:34:30 -0700
Re: Low Aspect Via definition	Timothy Reeves	Tue, 3 Apr 2001 10:50:08 -0700
Re: The standard bit inspection spec	Timothy Reeves	Thu, 26 Apr 2001 15:33:13 -0700
Re: Help!	Tom Taylor	Thu, 5 Apr 2001 10:55:55 -0400
Re: Improved SlkScreen requirements	Tony Steinke	Thu, 19 Apr 2001 15:55:52 -0400
resist lamination	Tony Steinke	Fri, 13 Apr 2001 13:23:44 -0400
Re: Help!	Torok Greg	Thu, 5 Apr 2001 09:57:22 -0400
Re: Embrittlement	Wenger, George M (George)	Mon, 23 Apr 2001 13:45:50 -0400
Re: Random absence of solder joints	Wenger, George M (George)	Wed, 4 Apr 2001 18:48:14 -0400
Re: Random absence of solder joints	Wenger, George M (George)	Fri, 6 Apr 2001 14:27:49 -0400
Re: AuSn soldering on Silver	Werner Engelmaier	Fri, 6 Apr 2001 07:43:56 EDT
Re: AuSn soldering on Silver	Werner Engelmaier	Tue, 10 Apr 2001 22:17:23 EDT
Re: Embrittlement	Werner Engelmaier	Mon, 16 Apr 2001 10:23:05 EDT
Help!	Werner Engelmaier	Thu, 5 Apr 2001 09:20:35 EDT
Re: Help!	Werner Engelmaier	Thu, 5 Apr 2001 10:44:48 EDT
Help! Still on the road	Werner Engelmaier	Sat, 14 Apr 2001 00:16:49 EDT
Re: Loaded question...outsourcing vs. in-house manufacturing ...	Werner Engelmaier	Wed, 25 Apr 2001 07:24:39 EDT
Re: Low Aspect Via definition	Werner Engelmaier	Tue, 3 Apr 2001 16:59:02 EDT
Re: Low Aspect Via definition	Werner Engelmaier	Wed, 4 Apr 2001 07:09:12 EDT
Re: SMT Rework Reliablity	Werner Engelmaier	Tue, 10 Apr 2001 22:17:25 EDT
Re: saving orcad files	William Brown	Mon, 23 Apr 2001 12:10:41 -0400
Reliability of exposed copper	Yehuda Weisz	Sun, 15 Apr 2001 21:26:46 +0200
Fw: Reliability of exposed copper	Yehuda Weisz	Sat, 28 Apr 2001 00:03:30 +0200
Re: Fw: Reliability of exposed copper	Yehuda Weisz	Mon, 30 Apr 2001 00:31:59 +0200
Re: Who makes long life press pads (as press buffer)?	Yehuda Weisz	Sun, 15 Apr 2001 21:32:41 +0200
The standard bit inspection spec	Young Hwan Ju	Thu, 26 Apr 2001 15:08:10 +0900
Re: The standard bit inspection spec	Young Hwan Ju	Thu, 26 Apr 2001 17:18:47 +0900

ATOM RSS1 RSS2

LISTSERV.IPC.ORG

TECHNET Archives

April 2001

TechNet@IPC.ORG

Subject

From

Date