LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


March 2001


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

0402 Solderability Test (3 messages)
3 point bend test (4 messages)
32mil vs 40mil (2 messages)
8,200 job lost in Contract Manufacturing... (3 messages)
<No subject> (4 messages)
About the PCD Conference Texas, Y'all.... (1 message)
Acid resistant seating (2 messages)
Adhesive substance test methods (1 message)
Advanced Expo Technical Forum Packets Available for Download (1 message)
ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES (11 messages)
Al wire bonding (8 messages)
Another ESD Floor Question (1 message)
Antw: [TN] Rework profil for BGA (1 message)
Baker Technologies- e-mail address/web site (5 messages)
Bench top cleaning of hand soldering (4 messages)
Benchmarking levels (with IPC-1710) (1 message)
BGA crack pic (4 messages)
BGA crack Summary, theory, and questions (7 messages)
BGA crack- major headache (17 messages)
BGA crack- major headache wi/pic (3 messages)
BGA Solder Joint Fractures (2 messages)
BGA Thermal Cycling and cold spray (3 messages)
Board Outline Dimensions (2 messages)
BOM Software (3 messages)
Bonding information (2 messages)
Burning traces (1 message)
Cam & Au (2 messages)
CAM& AU (5 messages)
Cigarette Smoke and Computers... (10 messages)
Cleaning of mis-printed boards (2 messages)
Cleaning of Printed Wiring Boards (4 messages)
Cleanliness Test (1 message)
clear as glass flex material (2 messages)
Closed loop wave height control (2 messages)
Collaborative Manufacturing Software? (1 message)
Collasped Height of BGAs/CSPs (3 messages)
Component package sizes (3 messages)
component placement (1 message)
Conformal Coating (2 messages)
Contamination acceptacne level with a no-clean assembly (5 messages)
Contract Assemblers Specializing in Post-Soldering Underfill (1 message)
Converters Digital to RGB (1 message)
Conveyorized desmear line (1 message)
Correction: Exception to IPC-6012 Class II minimum via wall plating (1 message)
Cracked Capacitor 1812 (5 messages)
Current on Copper Planes (3 messages)
Cyclone copper filter for brushcleaner (1 message)
Data conversion PADS to DXF (2 messages)
Dendritic growth on top of capacitors (2 messages)
DFM Component Placement (2 messages)
Disposeable Mobile Phones..... (9 messages)
Dry Film Breakdown In Ammoiacal Etching (8 messages)
Dry Film Breakdown In Ammoniacal Etching (1 message)
Dry Film Breakdown In Ammoniacal Etching III (1 message)
Dry Film Breakdown in Etching II (1 message)
Ecessive throughhole etching on 1/2oz innerlayers (1 message)
Electronic Assembly Question: Pop-Rivets (3 messages)
en las concentraciones de trabajo. (6 messages)
ENIG and BGA soldering, trying to make conclusion. (1 message)
EPA Proposed MP&M Regulations Will Close PWB Facilities; Forum Planned (1 message)
Epoxy and Polycarbonate (6 messages)
Epoxy Ink Stripper... (22 messages)
ESD Floor (8 messages)
ESD Symbol (4 messages)
Etch Rates/Factors and Current Carrying Capacity of Fine lines (3 messages)
Etch Rates/Factors and Current Carrying Capacity of Finelines (1 message)
Exception to IPC-A-600 Class II minimum via wall plating (2 messages)
Exposed Copper (2 messages)
fidcial mark missing (2 messages)
Finger Cots (1 message)
Flex circuit questions... (3 messages)
Flex Circuits? (6 messages)
Flux dye... (14 messages)
Follow-up to solder flux problem (3 messages)
FW: Hipot Test (2 messages)
FW: new virus (1 message)
Fw: [TN] Solder flux under LCCs (1 message)
FW: [TN] Solvent for RTV738 (6 messages)
Gold Finger Protection (3 messages)
Gold stripping (1 message)
Graph for PCB Laminate Usage (2 messages)
Heat-sinked BGA Bridging... (2 messages)
Height of 0402 devices (3 messages)
Help, I'm Imbalanced (2 messages)
hot bar soldering (4 messages)
How does HASL / FR-4 board cleanliness and humidityrelate tofailure rates? (1 message)
How to IR REFLOW TEST FOR MODULE PCB? (1 message)
HUGE SMT assembly... (14 messages)
Hugh SMT Assembly / Large Area Stencils (1 message)
Hydrobromic vs. Hydrochloric. (9 messages)
IC Damage by magnetism? (8 messages)
Impedance equation (2 messages)
Industry standard for audit plans (1 message)
Insufficient Solder Joints (1 message)
IPC Designers Council Meeting : WED, MAR 28, 6PM @ Hallmark Circ uits, Poway, CA (1 message)
IPC REGULATORY ALERT - MEMBERS HELP NEEDED TO GATHER DATA TO DISPUTE THE MP&M RULE (1 message)
IPC-9261 (1 message)
Kapton Tape and ESD Concerns (10 messages)
Lacing Tape (3 messages)
Laminated FR4 Standard Sheet Size? (5 messages)
Layer to Layer registration (3 messages)
Lead tarnish on FPT (2 messages)
Looking for First Article forms for PCB and PCBA (1 message)
Low aspect definition (1 message)
Mark Orlowski/PEMSTAR Inc is out of the office. (1 message)
Martin Marieta vs. IPC comparison (1 message)
Material handling trays (2 messages)
materials (1 message)
Maximum Thickness of Concoat (5 messages)
Mechanical Calculation (2 messages)
microscopes (1 message)
MicroVia In Pad Vs Silver VIA fill (11 messages)
MIL- 105D or MIL-105E? What is new one? (6 messages)
MIL-P-13949 replaced by MIL-S-13949? (5 messages)
MIL-P-55110D (3 messages)
Mission impossible or is it? (6 messages)
Nc&Oc (3 messages)
Need Wire (4 messages)
New Viruses (5 messages)
No Clean and lubricating oils (1 message)
Non -Technical TN fraction's message (2 messages)
Optimum Baume Ferric Chloride For Stainless Steel (3 messages)
Oval BGA Pads (3 messages)
Oval Pads Article (1 message)
Oxide examination (3 messages)
Packaging Development Equipment? (2 messages)
Part Sticking to Top Tape? (3 messages)
PBGA Cold solder joints (3 messages)
PCB Design Conference Opportunity for the Design Industry (2 messages)
PCB FAB (1 message)
PCB Manufacturer (2 messages)
PCB Material Spec (2 messages)
PCB Scoring spec (3 messages)
pH sensing for Ammonia etcher (1 message)
Photographic Paper (3 messages)
Potting in PTFE enclosure (6 messages)
Press-fit (2 messages)
PTH-to-SMT... (4 messages)
pumping concoat (1 message)
PWB FABRICATION (2 messages)
Quality of Etching (5 messages)
Reballing concern (8 messages)
Reflow/Stencil design classes (2 messages)
Reliability of Solders (2 messages)
Residual Nickel on flex circuit (1 message)
Rework profil for BGA (4 messages)
RF Assembly Issues (8 messages)
RFU2 (4 messages)
routing top layer material - yes or no? (2 messages)
Screened on resistance (2 messages)
Selection of Test Voltage for fab testing... (1 message)
SM Paste Print to Pick-n-Place (2 messages)
Small Hole PTH Reliability in PWB's (1 message)
Soft Gold Over Copper (5 messages)
Software (1 message)
Solder balls after wave soldering (2 messages)
Solder flux under LCCs (8 messages)
Solder Stop affecting LPISM adhesion of pad openings on Copper Groun... (1 message)
Solder Stop affecting LPISM adhesion of pad openings on Copper Groundplanes (3 messages)
Solder Stop affecting LPISM adhesion of pad openings onCopperGroundp... (1 message)
Solder Stop affecting LPISM adhesion of pad openings onCopperGroundplanes (2 messages)
Solderability (6 messages)
Soldering (6 messages)
soldering to stainless (7 messages)
Soldermask geometry (3 messages)
Solvent for RTV738 (10 messages)
Solvent for RTV738 - But wait there is more! (1 message)
Split planes and rs274x (7 messages)
Standard Sizes for Screen Printers (7 messages)
Standards (2 messages)
Stndoffs (3 messages)
Stop Subscription (1 message)
Substrate trace crack (5 messages)
Suggestion on laser soldering (1 message)
SV: [TN] Optimum Baume Ferric Chloride For Stainless Steel (1 message)
Taiwans Top PCB Makers (5 messages)
TechNet Digest - 23 Mar 2001 to 24 Mar 2001 (#2001-178) (1 message)
TechNet Digest - 28 Mar 2001 - Special issue (#2001-186) (1 message)
temperature delta on PWB (2 messages)
Tenting with dry film soldermask (4 messages)
Test tooling hole tolerance of +.002" / -000 on .125" ho le size (3 messages)
Test tooling hole tolerance of +.002" / -000 on .125" hole size (2 messages)
Thermally conductive adhesive (6 messages)
Time is Running Out to SAVE 10% on Expo Registration (2 messages)
Tips wanted for my first multilayer board? (2 messages)
twist and wrap issue (5 messages)
Upcoming IMAPS_SMTA Symposium (1 message)
v-groove (score and break) depanelization (4 messages)
V-score Clearance (4 messages)
V-score Clearance - oops (1 message)
wafer question (8 messages)
Water Wash system justification (7 messages)
Wave Solder (2 messages)
Wave solder and earthquakes. (1 message)
WHMA (2 messages)
Who makes long life press pads (as press buffer)? (2 messages)
Why I appreciate ya'll... (1 message)
x'[{>;rbg,=v|,d7Uo'xx_a'}zD+3LY (1 message)
[TN] x'[{>;rbg,§â=vô|,d7«Uo'xxù_a'}zD+3LY (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

Chuck Brummer <[log in to unmask]>

Wed, 14 Mar 2001 14:43:04 -0800

50 lines

Re:

Ken Mc Gowan <[log in to unmask]>

Wed, 14 Mar 2001 17:02:01 -0200

68 lines

Re:

Vanderhoof, Brad <[log in to unmask]>

Fri, 16 Mar 2001 09:45:47 -0800

69 lines

Re:

Werner Engelmaier <[log in to unmask]>

Fri, 16 Mar 2001 15:41:53 EST

31 lines

Re:

<Peter George Duncan> <[log in to unmask]>

Mon, 19 Mar 2001 11:50:34 +0800

82 lines

Re:

Kathy Kuhlow <[log in to unmask]>

Mon, 19 Mar 2001 09:40:23 -0600

67 lines

Re:

Brian Wada <[log in to unmask]>

Mon, 19 Mar 2001 10:52:03 -0800

105 lines

New Thread

0402 Solderability Test

0402 Solderability Test

peter lee <[log in to unmask]>

Wed, 21 Mar 2001 16:30:26 -0800

35 lines

Re: 0402 Solderability Test

Phil Crepeau <[log in to unmask]>

Wed, 21 Mar 2001 16:58:50 -0800

59 lines

Re: 0402 Solderability Test

Kathy Kuhlow <[log in to unmask]>

Thu, 22 Mar 2001 13:34:59 -0600

46 lines

New Thread

3 point bend test

3 point bend test

Hann Pang <[log in to unmask]>

Mon, 12 Mar 2001 12:54:05 -0600

28 lines

Re: 3 point bend test

Brian McCrory <[log in to unmask]>

Mon, 12 Mar 2001 16:25:09 -0800

56 lines

Re: 3 point bend test

Brent Stayer <[log in to unmask]>

Mon, 12 Mar 2001 19:42:49 -0500

20 lines

Re: 3 point bend test

Werner Engelmaier <[log in to unmask]>

Mon, 12 Mar 2001 23:46:04 EST

32 lines

New Thread

32mil vs 40mil

32mil vs 40mil

Lothar Thole <[log in to unmask]>

Wed, 7 Mar 2001 18:32:11 +1030

37 lines

Re: 32mil vs 40mil

Roger M. Stoops <[log in to unmask]>

Wed, 7 Mar 2001 11:57:16 -0500

94 lines

New Thread

8,200 job lost in Contract Manufacturing...

8,200 job lost in Contract Manufacturing...

Stephen R. Gregory <[log in to unmask]>

Mon, 19 Mar 2001 21:08:59 EST

33 lines

Re: 8,200 job lost in Contract Manufacturing...

Kathy Kuhlow <[log in to unmask]>

Tue, 20 Mar 2001 08:10:23 -0600

50 lines

Re: 8,200 job lost in Contract Manufacturing...

Gabriela Bogdan <[log in to unmask]>

Tue, 20 Mar 2001 21:45:43 +0200

39 lines

New Thread

<No subject>

<No subject>

Rougeux, Scott <[log in to unmask]>

Thu, 1 Mar 2001 11:52:45 -0600

25 lines

<No subject>

Brown, Matthew <[log in to unmask]>

Wed, 14 Mar 2001 09:33:40 -0500

31 lines

<No subject>

Steffen, Don E <[log in to unmask]>

Fri, 16 Mar 2001 10:27:06 -0500

110 lines

<No subject>

Harry Hallstrom <[log in to unmask]>

Wed, 28 Mar 2001 09:04:11 -0500

20 lines

New Thread

About the PCD Conference Texas, Y'all....

About the PCD Conference Texas, Y'all....

Barbara Burcham <[log in to unmask]>

Fri, 2 Mar 2001 14:34:05 -0600

47 lines

New Thread

Acid resistant seating

Acid resistant seating

nishath yasmeen <[log in to unmask]>

Thu, 29 Mar 2001 12:57:27 -0600

27 lines

Re: Acid resistant seating

<Rudy Sedlak> <[log in to unmask]>

Thu, 29 Mar 2001 15:44:36 EST

21 lines

New Thread

Adhesive substance test methods

Adhesive substance test methods

Alastair Champion <[log in to unmask]>

Wed, 7 Mar 2001 12:52:03 -0500

26 lines

New Thread

Advanced Expo Technical Forum Packets Available for Download

Advanced Expo Technical Forum Packets Available for Download

Christopher Jorgensen <[log in to unmask]>

Sun, 18 Mar 2001 14:46:08 -0600

124 lines

New Thread

ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

Marsico, James <[log in to unmask]>

Tue, 13 Mar 2001 14:04:01 -0500

38 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

Ted Tontis <[log in to unmask]>

Tue, 13 Mar 2001 13:23:34 -0600

66 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

McGlaughlin, Jeffrey A <[log in to unmask]>

Tue, 13 Mar 2001 14:24:32 -0500

71 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

Hann Pang <[log in to unmask]>

Tue, 13 Mar 2001 14:20:13 -0600

113 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

Phil Crepeau <[log in to unmask]>

Tue, 13 Mar 2001 12:55:52 -0800

62 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

David Douthit <[log in to unmask]>

Tue, 13 Mar 2001 22:37:14 -0700

61 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

Marsico, James <[log in to unmask]>

Wed, 14 Mar 2001 07:47:13 -0500

120 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

Stephen R. Gregory <[log in to unmask]>

Wed, 14 Mar 2001 08:57:02 EST

42 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

Kelly M. Schriver <[log in to unmask]>

Wed, 14 Mar 2001 16:10:59 -0600

90 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

Goh Guan Chye <[log in to unmask]>

Thu, 22 Mar 2001 10:23:33 +0800

85 lines

Re: ADVANCED PACKAGING MATERIALS AND TECHNOLOGIES

<Peter George Duncan> <[log in to unmask]>

Tue, 27 Mar 2001 11:15:39 +0800

265 lines

New Thread

Al wire bonding

Al wire bonding

J. M. Badia <[log in to unmask]>

Mon, 5 Mar 2001 13:41:41 +0100

31 lines

Re: Al wire bonding

Misner, Bruce <[log in to unmask]>

Mon, 5 Mar 2001 07:31:14 -0600

64 lines

Re: Al wire bonding

Ken Mc Gowan <[log in to unmask]>

Mon, 5 Mar 2001 13:40:43 -0200

64 lines

Re: Al wire bonding

Creswick <[log in to unmask]>

Mon, 5 Mar 2001 11:25:34 -0500

90 lines

Re: Al wire bonding

Misner, Bruce <[log in to unmask]>

Mon, 5 Mar 2001 11:07:56 -0600

128 lines

Re: Al wire bonding

Creswick <[log in to unmask]>

Mon, 5 Mar 2001 19:13:05 -0500

160 lines

Re: Al wire bonding

J. M. Badia <[log in to unmask]>

Tue, 6 Mar 2001 10:09:45 +0100

41 lines

Re: Al wire bonding

Creswick <[log in to unmask]>

Tue, 6 Mar 2001 11:03:47 -0500

82 lines

New Thread

Another ESD Floor Question

Another ESD Floor Question

Marsico, James <[log in to unmask]>

Thu, 15 Mar 2001 13:06:47 -0500

27 lines

New Thread

Antw: [TN] Rework profil for BGA

Antw: [TN] Rework profil for BGA

Guenter Grossmann <[log in to unmask]>

Mon, 19 Mar 2001 10:39:01 +0100

39 lines

New Thread

Baker Technologies- e-mail address/web site

Baker Technologies- e-mail address/web site

Edward Szpruch <[log in to unmask]>

Tue, 13 Mar 2001 17:14:21 +0200

29 lines

Re: Baker Technologies- e-mail address/web site

Mark Mazzoli <[log in to unmask]>

Tue, 13 Mar 2001 07:56:02 -0800

79 lines

Re: Baker Technologies- e-mail address/web site

Mordechai Holtzman <[log in to unmask]>

Tue, 13 Mar 2001 14:37:15 EST

55 lines

Re: Baker Technologies- e-mail address/web site

Mordechai Holtzman <[log in to unmask]>

Tue, 13 Mar 2001 14:40:20 EST

59 lines

Re: Baker Technologies- e-mail address/web site

Ken Mc Gowan <[log in to unmask]>

Tue, 13 Mar 2001 23:25:58 -0200

109 lines

New Thread

Bench top cleaning of hand soldering

Bench top cleaning of hand soldering

Lambert, Katherine A. <[log in to unmask]>

Wed, 7 Mar 2001 11:09:57 -0500

36 lines

Re: Bench top cleaning of hand soldering

Dieselberg, Ron <[log in to unmask]>

Wed, 7 Mar 2001 12:44:13 -0500

72 lines

Re: Bench top cleaning of hand soldering

Kathy Kuhlow <[log in to unmask]>

Wed, 7 Mar 2001 12:34:22 -0600

122 lines

Re: Bench top cleaning of hand soldering

Kasprzak, Bill (sys) USX <[log in to unmask]>

Wed, 7 Mar 2001 11:56:52 -0500

72 lines

New Thread

Benchmarking levels (with IPC-1710)

Benchmarking levels (with IPC-1710)

Inbavannan <[log in to unmask]>

Wed, 21 Mar 2001 09:09:21 +0530

38 lines

New Thread

BGA crack pic

Re: BGA crack pic

Stephen R. Gregory <[log in to unmask]>

Wed, 28 Mar 2001 22:20:31 EST

42 lines

Re: BGA crack pic

<Peter George Duncan> <[log in to unmask]>

Thu, 29 Mar 2001 14:05:46 +0800

99 lines

Re: BGA crack pic

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 29 Mar 2001 08:40:15 +0200

122 lines

Re: BGA crack pic

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 29 Mar 2001 14:37:50 +0200

191 lines

New Thread

BGA crack Summary, theory, and questions

BGA crack Summary, theory, and questions

Rudolph Yu <[log in to unmask]>

Thu, 29 Mar 2001 18:02:06 -0500

75 lines

Re: BGA crack Summary, theory, and questions

Wenger, George M (George) <[log in to unmask]>

Thu, 29 Mar 2001 18:56:04 -0500

166 lines

Re: BGA crack Summary, theory, and questions

David Hillman <[log in to unmask]>

Fri, 30 Mar 2001 07:30:58 -0600

165 lines

Re: BGA crack Summary, theory, and questions

Bev Christian <[log in to unmask]>

Fri, 30 Mar 2001 08:46:11 -0500

195 lines

Re: BGA crack Summary, theory, and questions

Lou Hart <[log in to unmask]>

Fri, 30 Mar 2001 08:37:44 -0500

93 lines

Re: BGA crack Summary, theory, and questions

Bev Christian <[log in to unmask]>

Fri, 30 Mar 2001 08:51:59 -0500

21 lines

Re: BGA crack Summary, theory, and questions

David Hillman <[log in to unmask]>

Fri, 30 Mar 2001 11:16:44 -0600

26 lines

New Thread

BGA crack- major headache

BGA crack- major headache

Rudolph Yu <[log in to unmask]>

Wed, 28 Mar 2001 11:48:21 -0500

57 lines

Re: BGA crack- major headache

Phil Crepeau <[log in to unmask]>

Wed, 28 Mar 2001 09:17:10 -0800

80 lines

Re: BGA crack- major headache

Bob Perkins <[log in to unmask]>

Wed, 28 Mar 2001 10:09:57 -0800

93 lines

Re: BGA crack- major headache

Steve Joy <[log in to unmask]>

Wed, 28 Mar 2001 10:04:35 -0800

32 lines

Re: BGA crack- major headache

Wenger, George M (George) <[log in to unmask]>

Wed, 28 Mar 2001 13:39:11 -0500

129 lines

Re: BGA crack- major headache

Valladares, Hector A (FL51) <[log in to unmask]>

Wed, 28 Mar 2001 13:39:16 -0500

106 lines

Re: BGA crack- major headache

Rudolph Yu <[log in to unmask]>

Wed, 28 Mar 2001 14:18:40 -0500

119 lines

Re: BGA crack- major headache

Rudolph Yu <[log in to unmask]>

Wed, 28 Mar 2001 14:18:10 -0500

119 lines

Re: BGA crack- major headache

Rudolph Yu <[log in to unmask]>

Wed, 28 Mar 2001 14:31:15 -0500

127 lines

Re: BGA crack- major headache

Rudolph Yu <[log in to unmask]>

Wed, 28 Mar 2001 14:43:28 -0500

163 lines

Re: BGA crack- major headache

Zhang Tong Long <[log in to unmask]>

Thu, 29 Mar 2001 03:59:36 +0800

85 lines

Re: BGA crack- major headache

Werner Engelmaier <[log in to unmask]>

Wed, 28 Mar 2001 15:24:08 EST

35 lines

Re: BGA crack- major headache

<Peter George Duncan> <[log in to unmask]>

Thu, 29 Mar 2001 08:24:53 +0800

144 lines

Re: BGA crack- major headache

Marsico, James <[log in to unmask]>

Thu, 29 Mar 2001 07:55:06 -0500

221 lines

Re: BGA crack- major headache

Wenger, George M (George) <[log in to unmask]>

Thu, 29 Mar 2001 07:52:09 -0500

190 lines

Re: BGA crack- major headache

Jim Kittel <[log in to unmask]>

Thu, 29 Mar 2001 06:10:38 -0700

81 lines

BGA crack- major headache

Francois Monette <[log in to unmask]>

Thu, 29 Mar 2001 08:29:49 -0500

28 lines

New Thread

BGA crack- major headache wi/pic

BGA crack- major headache wi/pic

Rudolph Yu <[log in to unmask]>

Wed, 28 Mar 2001 20:58:17 -0500

66 lines

Re: BGA crack- major headache wi/pic

Stephen R. Gregory <[log in to unmask]>

Wed, 28 Mar 2001 21:10:15 EST

41 lines

Re: BGA crack- major headache wi/pic

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Thu, 29 Mar 2001 09:43:33 -0500

121 lines

New Thread

BGA Solder Joint Fractures

BGA Solder Joint Fractures

Dennis Manowski <[log in to unmask]>

Wed, 7 Mar 2001 11:46:18 -0800

41 lines

Re: BGA Solder Joint Fractures

Werner Engelmaier <[log in to unmask]>

Wed, 7 Mar 2001 20:22:08 EST

33 lines

New Thread

BGA Thermal Cycling and cold spray

BGA Thermal Cycling and cold spray

Bob Perkins <[log in to unmask]>

Tue, 20 Mar 2001 14:09:44 -0800

33 lines

Re: BGA Thermal Cycling and cold spray

Craig Hillman <[log in to unmask]>

Tue, 20 Mar 2001 18:09:05 -0500

66 lines

Re: BGA Thermal Cycling and cold spray

<Peter George Duncan> <[log in to unmask]>

Wed, 21 Mar 2001 09:26:55 +0800

81 lines

New Thread

Board Outline Dimensions

Board Outline Dimensions

Spencer Davis <[log in to unmask]>

Thu, 8 Mar 2001 14:26:58 -0500

28 lines

Re: Board Outline Dimensions

Don Vischulis <[log in to unmask]>

Thu, 8 Mar 2001 12:51:56 -0700

59 lines

New Thread

BOM Software

BOM Software

Bill Davis <[log in to unmask]>

Fri, 2 Mar 2001 17:00:09 EST

30 lines

Re: BOM Software

Craig Elison <[log in to unmask]>

Fri, 2 Mar 2001 16:50:57 -0600

78 lines

Re: BOM Software

avigdor <[log in to unmask]>

Sat, 3 Mar 2001 01:27:39 +0200

55 lines

New Thread

Bonding information

Bonding information

Bissonnette, Jean-Francois <[log in to unmask]>

Tue, 20 Mar 2001 14:37:56 -0500

75 lines

Re: Bonding information

Dieselberg, Ron <[log in to unmask]>

Tue, 20 Mar 2001 15:11:52 -0500

56 lines

New Thread

Burning traces

Burning traces

ANDERSON, Corky <[log in to unmask]>

Fri, 9 Mar 2001 15:20:19 -0800

33 lines

New Thread

Cam & Au

Re: Cam & Au

Anil Kher <[log in to unmask]>

Thu, 22 Mar 2001 09:22:53 +0530

98 lines

Re: Cam & Au

Brian Ellis <[log in to unmask]>

Thu, 22 Mar 2001 10:48:30 +0200

74 lines

New Thread

CAM& AU

CAM& AU

Earl Moon <[log in to unmask]>

Sun, 18 Mar 2001 05:45:36 -0600

53 lines

Re: CAM& AU

<Peter George Duncan> <[log in to unmask]>

Mon, 19 Mar 2001 11:56:55 +0800

102 lines

Re: CAM& AU

Brian Ellis <[log in to unmask]>

Mon, 19 Mar 2001 12:52:19 +0200

93 lines

Re: CAM& AU

Earl Moon <[log in to unmask]>

Mon, 19 Mar 2001 13:53:16 -0600

35 lines

Re: CAM& AU

Brian Ellis <[log in to unmask]>

Tue, 20 Mar 2001 10:38:50 +0200

72 lines

New Thread

Cigarette Smoke and Computers...

Cigarette Smoke and Computers...

Stephen R. Gregory <[log in to unmask]>

Mon, 12 Mar 2001 12:41:34 EST

36 lines

Re: Cigarette Smoke and Computers...

Phil Nutting <[log in to unmask]>

Mon, 12 Mar 2001 12:54:39 -0500

74 lines

Re: Cigarette Smoke and Computers...

Roger M. Stoops <[log in to unmask]>

Mon, 12 Mar 2001 13:01:44 -0500

93 lines

Re: Cigarette Smoke and Computers...

Graham Naisbitt <[log in to unmask]>

Mon, 12 Mar 2001 18:08:39 -0000

82 lines

Re: Cigarette Smoke and Computers...

Dan Brandler <[log in to unmask]>

Mon, 12 Mar 2001 09:24:47 -0800

30 lines

Re: Cigarette Smoke and Computers...

Graham Naisbitt <[log in to unmask]>

Mon, 12 Mar 2001 18:43:41 -0000

87 lines

Re: Cigarette Smoke and Computers...

Bev Christian <[log in to unmask]>

Mon, 12 Mar 2001 13:39:24 -0500

166 lines

Re: Cigarette Smoke and Computers...

Ed Valentine <[log in to unmask]>

Mon, 12 Mar 2001 15:26:03 -0500

85 lines

Re: Cigarette Smoke and Computers...

Stephen R. Gregory <[log in to unmask]>

Mon, 12 Mar 2001 20:38:47 EST

70 lines

Re: Cigarette Smoke and Computers...

Brian Ellis <[log in to unmask]>

Tue, 13 Mar 2001 16:16:50 +0200

58 lines

New Thread

Cleaning of mis-printed boards

Re: Cleaning of mis-printed boards

Kamalesh Dhaneshwar <[log in to unmask]>

Mon, 12 Mar 2001 16:03:24 -0600

24 lines

Re: Cleaning of mis-printed boards

Bill Schreiber <[log in to unmask]>

Wed, 21 Mar 2001 16:59:53 -0600

36 lines

New Thread

Cleaning of Printed Wiring Boards

Cleaning of Printed Wiring Boards

Steffen, Don E <[log in to unmask]>

Tue, 20 Mar 2001 10:55:06 -0500

102 lines

Re: Cleaning of Printed Wiring Boards

Brian Ellis <[log in to unmask]>

Tue, 20 Mar 2001 18:34:15 +0200

59 lines

Re: Cleaning of Printed Wiring Boards

Bill Schreiber <[log in to unmask]>

Wed, 21 Mar 2001 17:19:28 -0600

35 lines

Re: Cleaning of Printed Wiring Boards

Woody Luecke <[log in to unmask]>

Fri, 23 Mar 2001 10:17:15 EST

21 lines

New Thread

Cleanliness Test

Cleanliness Test

<Rudy Sedlak> <[log in to unmask]>

Wed, 14 Mar 2001 09:43:19 EST

31 lines

New Thread

clear as glass flex material

clear as glass flex material

Anil Kher <[log in to unmask]>

Thu, 15 Mar 2001 16:31:41 +0530

80 lines

Re: clear as glass flex material

Eric Christison <[log in to unmask]>

Mon, 19 Mar 2001 07:39:24 -0600

44 lines

New Thread

Closed loop wave height control

Closed loop wave height control

Rougeux, Scott <[log in to unmask]>

Fri, 2 Mar 2001 13:01:34 -0600

27 lines

Re: Closed loop wave height control

Brian Ellis <[log in to unmask]>

Sat, 3 Mar 2001 09:18:11 +0200

69 lines

New Thread

Collaborative Manufacturing Software?

Collaborative Manufacturing Software?

Anne Capwell <[log in to unmask]>

Mon, 26 Mar 2001 15:38:26 -0800

29 lines

New Thread

Collasped Height of BGAs/CSPs

Collasped Height of BGAs/CSPs

Hann Pang <[log in to unmask]>

Thu, 29 Mar 2001 10:53:12 -0600

33 lines

Re: Collasped Height of BGAs/CSPs

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 30 Mar 2001 08:55:30 +0200

56 lines

Re: Collasped Height of BGAs/CSPs

Werner Engelmaier <[log in to unmask]>

Fri, 30 Mar 2001 14:32:25 EST

28 lines

New Thread

Component package sizes

Component package sizes

Ken Fong <[log in to unmask]>

Thu, 29 Mar 2001 12:05:23 +0800

26 lines

Re: Component package sizes

Jack Crawford <[log in to unmask]>

Thu, 29 Mar 2001 10:28:59 -0600

133 lines

Re: Component package sizes

Olson, Jack <[log in to unmask]>

Thu, 29 Mar 2001 10:48:28 -0600

45 lines

New Thread

component placement

component placement

Golembiewski, Ray <[log in to unmask]>

Tue, 6 Mar 2001 11:31:14 -0500

29 lines

New Thread

Conformal Coating

Conformal Coating

Merri Charbonneau <[log in to unmask]>

Fri, 16 Mar 2001 12:51:02 -0600

28 lines

Re: Conformal Coating

Chico Almeras <[log in to unmask]>

Fri, 16 Mar 2001 14:21:44 -0500

62 lines

New Thread

Contamination acceptacne level with a no-clean assembly

Contamination acceptacne level with a no-clean assembly

Rudolph <[log in to unmask]>

Tue, 27 Mar 2001 00:08:07 -0800

105 lines

Re: Contamination acceptacne level with a no-clean assembly

Brian Ellis <[log in to unmask]>

Tue, 27 Mar 2001 12:29:39 +0300

93 lines

Re: Contamination acceptacne level with a no-clean assembly

Douglas Pauls <[log in to unmask]>

Tue, 27 Mar 2001 08:06:21 -0600

75 lines

Re: Contamination acceptacne level with a no-clean assembly

Kathy Kuhlow <[log in to unmask]>

Tue, 27 Mar 2001 09:13:15 -0600

64 lines

Re: Contamination acceptacne level with a no-clean assembly

Brian Ellis <[log in to unmask]>

Tue, 27 Mar 2001 18:43:37 +0300

102 lines

New Thread

Contract Assemblers Specializing in Post-Soldering Underfill

Contract Assemblers Specializing in Post-Soldering Underfill

Craig Hillman <[log in to unmask]>

Wed, 28 Mar 2001 15:00:45 -0500

26 lines

New Thread

Converters Digital to RGB

Re: Converters Digital to RGB

avigdor <[log in to unmask]>

Mon, 5 Mar 2001 10:53:20 +0200

32 lines

New Thread

Conveyorized desmear line

Conveyorized desmear line

Yehuda Weisz <[log in to unmask]>

Mon, 12 Mar 2001 23:32:32 +0200

74 lines

New Thread

Correction: Exception to IPC-6012 Class II minimum via wall plating

Correction: Exception to IPC-6012 Class II minimum via wall plating

Ashley Allen Shepard <[log in to unmask]>

Mon, 12 Mar 2001 06:52:32 -0600

25 lines

New Thread

Cracked Capacitor 1812

Cracked Capacitor 1812

Nicolas Ortiz <[log in to unmask]>

Mon, 12 Mar 2001 10:11:15 -0700

26 lines

Re: Cracked Capacitor 1812

Guy Ramsey <[log in to unmask]>

Mon, 12 Mar 2001 13:17:10 -0500

60 lines

Cracked Capacitor 1812

John Brewer <[log in to unmask]>

Mon, 12 Mar 2001 13:34:07 -0500

39 lines

Re: Cracked Capacitor 1812

Tom Parkinson - Quality System Manager <[log in to unmask]>

Mon, 12 Mar 2001 14:19:19 -0500

69 lines

Re: Cracked Capacitor 1812

Werner Engelmaier <[log in to unmask]>

Mon, 12 Mar 2001 23:46:05 EST

32 lines

New Thread

Current on Copper Planes

Current on Copper Planes

Doug M <[log in to unmask]>

Wed, 7 Mar 2001 11:52:44 -0800

29 lines

Re: Current on Copper Planes

Roger M. Stoops <[log in to unmask]>

Wed, 7 Mar 2001 17:41:01 -0500

93 lines

Re: Current on Copper Planes

Hiteshew, Michael <[log in to unmask]>

Wed, 7 Mar 2001 18:23:31 -0500

45 lines

New Thread

Cyclone copper filter for brushcleaner

Cyclone copper filter for brushcleaner

Maurice Colyer <[log in to unmask]>

Sat, 24 Mar 2001 17:53:43 -0600

20 lines

New Thread

Data conversion PADS to DXF

Data conversion PADS to DXF

Bob Hawkins <[log in to unmask]>

Thu, 1 Mar 2001 16:41:56 -0600

21 lines

Re: Data conversion PADS to DXF

Wolfgang <[log in to unmask]>

Thu, 1 Mar 2001 16:49:11 -0800

125 lines

New Thread

Dendritic growth on top of capacitors

Dendritic growth on top of capacitors

Kamalesh Dhaneshwar <[log in to unmask]>

Wed, 14 Mar 2001 14:27:57 -0600

31 lines

Re: Dendritic growth on top of capacitors

fraley , barrie <[log in to unmask]>

Wed, 14 Mar 2001 15:50:34 -0500

60 lines

New Thread

DFM Component Placement

DFM Component Placement

Jim Kittel <[log in to unmask]>

Wed, 7 Mar 2001 08:30:22 -0700

32 lines

Re: DFM Component Placement

Earl Moon <[log in to unmask]>

Wed, 7 Mar 2001 14:50:42 -0600

32 lines

New Thread

Disposeable Mobile Phones.....

Disposeable Mobile Phones.....

Peter tremewen <[log in to unmask]>

Fri, 2 Mar 2001 00:30:22 +1100

49 lines

Re: Disposeable Mobile Phones.....

Barbara Burcham <[log in to unmask]>

Thu, 1 Mar 2001 08:49:38 -0600

75 lines

Re: Disposeable Mobile Phones.....

Ted Nathan <[log in to unmask]>

Thu, 1 Mar 2001 09:23:59 -0700

111 lines

Re: Disposeable Mobile Phones.....

Barbara Burcham <[log in to unmask]>

Thu, 1 Mar 2001 10:47:27 -0600

118 lines

Re: Disposeable Mobile Phones.....

David J. Sanchez <[log in to unmask]>

Thu, 1 Mar 2001 08:52:24 -0800

84 lines

Re: Disposeable Mobile Phones.....

Roger M. Stoops <[log in to unmask]>

Thu, 1 Mar 2001 12:31:32 -0500

155 lines

Re: Disposeable Mobile Phones.....

Bissonnette, Jean-Francois <[log in to unmask]>

Thu, 1 Mar 2001 12:40:25 -0500

145 lines

Re: Disposeable Mobile Phones.....

[log in to unmask]

Thu, 1 Mar 2001 12:46:47 EST

31 lines

Re: Disposeable Mobile Phones.....

Ted Tontis <[log in to unmask]>

Thu, 1 Mar 2001 11:59:27 -0600

195 lines

New Thread

Dry Film Breakdown In Ammoiacal Etching

Dry Film Breakdown In Ammoiacal Etching

Larry J. Fisher <[log in to unmask]>

Sun, 18 Mar 2001 20:32:19 EST

158 lines

Re: Dry Film Breakdown In Ammoiacal Etching

Dennis Fritz <[log in to unmask]>

Sun, 18 Mar 2001 22:34:30 EST

42 lines

Re: Dry Film Breakdown In Ammoiacal Etching

Naftali Farchi <[log in to unmask]>

Mon, 19 Mar 2001 09:57:59 +0200

94 lines

Re: Dry Film Breakdown In Ammoiacal Etching

peter blokhuis <[log in to unmask]>

Mon, 19 Mar 2001 07:58:08 -0800

150 lines

Re: Dry Film Breakdown In Ammoiacal Etching

Robert Welch <[log in to unmask]>

Mon, 19 Mar 2001 15:38:09 -0500

318 lines

Re: Dry Film Breakdown In Ammoiacal Etching

Edward Szpruch <[log in to unmask]>

Tue, 20 Mar 2001 08:06:20 +0200

190 lines

Re: Dry Film Breakdown In Ammoiacal Etching

Ken Mc Gowan <[log in to unmask]>

Mon, 19 Mar 2001 11:09:01 -0200

267 lines

Re: Dry Film Breakdown In Ammoiacal Etching

Larry J. Fisher <[log in to unmask]>

Wed, 21 Mar 2001 06:42:55 EST

53 lines

New Thread

Dry Film Breakdown In Ammoniacal Etching

Re: Dry Film Breakdown In Ammoniacal Etching

<Rudy Sedlak> <[log in to unmask]>

Mon, 19 Mar 2001 00:23:13 EST

44 lines

New Thread

Dry Film Breakdown In Ammoniacal Etching III

Dry Film Breakdown In Ammoniacal Etching III

<Rudy Sedlak> <[log in to unmask]>

Mon, 19 Mar 2001 17:41:04 EST

48 lines

New Thread

Dry Film Breakdown in Etching II

Re: Dry Film Breakdown in Etching II

<Rudy Sedlak> <[log in to unmask]>

Mon, 19 Mar 2001 10:02:58 EST

29 lines

New Thread

Ecessive throughhole etching on 1/2oz innerlayers

Ecessive throughhole etching on 1/2oz innerlayers

sean clinton <[log in to unmask]>

Fri, 9 Mar 2001 10:56:26 -0600

68 lines

New Thread

Electronic Assembly Question: Pop-Rivets

Electronic Assembly Question: Pop-Rivets

Hiteshew, Michael <[log in to unmask]>

Wed, 28 Mar 2001 20:27:57 -0500

38 lines

Re: Electronic Assembly Question: Pop-Rivets

Marty Brooks <[log in to unmask]>

Thu, 29 Mar 2001 11:23:27 -0800

69 lines

Re: Electronic Assembly Question: Pop-Rivets

Hiteshew, Michael <[log in to unmask]>

Thu, 29 Mar 2001 16:01:38 -0500

118 lines

New Thread

en las concentraciones de trabajo.

en las concentraciones de trabajo.

Fernando Gmez <[log in to unmask]>

Mon, 26 Mar 2001 17:35:40 +0200

21 lines

Re: en las concentraciones de trabajo.

Timothy Reeves <[log in to unmask]>

Mon, 26 Mar 2001 12:06:22 -0800

65 lines

Re: en las concentraciones de trabajo.

Galang, Jerry <[log in to unmask]>

Mon, 26 Mar 2001 12:48:32 -0800

260 lines

Re: en las concentraciones de trabajo.

Hans Shin <[log in to unmask]>

Mon, 26 Mar 2001 12:59:03 -0800

45 lines

Re: en las concentraciones de trabajo.

Mauricio Castro <[log in to unmask]>

Mon, 26 Mar 2001 15:13:29 -0600

59 lines

Re: en las concentraciones de trabajo.

Barmuta, Mike <[log in to unmask]>

Mon, 26 Mar 2001 13:51:41 -0800

125 lines

New Thread

ENIG and BGA soldering, trying to make conclusion.

ENIG and BGA soldering, trying to make conclusion.

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 2 Mar 2001 11:57:40 +0100

76 lines

New Thread

EPA Proposed MP&M Regulations Will Close PWB Facilities; Forum Planned

EPA Proposed MP&M Regulations Will Close PWB Facilities; Forum Planned

Jack Crawford <[log in to unmask]>

Wed, 14 Mar 2001 18:38:41 -0600

117 lines

New Thread

Epoxy and Polycarbonate

Epoxy and Polycarbonate

Douglas Pauls <[log in to unmask]>

Wed, 21 Mar 2001 10:27:18 -0600

31 lines

Re: Epoxy and Polycarbonate

Brian Ellis <[log in to unmask]>

Wed, 21 Mar 2001 19:01:30 +0200

52 lines

Re: Epoxy and Polycarbonate

Phil Nutting <[log in to unmask]>

Wed, 21 Mar 2001 12:11:11 -0500

63 lines

Re: Epoxy and Polycarbonate

Mike Fenner <[log in to unmask]>

Wed, 21 Mar 2001 17:29:00 -0000

74 lines

Re: Epoxy and Polycarbonate

Douglas Pauls <[log in to unmask]>

Wed, 21 Mar 2001 13:30:14 -0600

32 lines

Re: Epoxy and Polycarbonate

Larry J. Fisher <[log in to unmask]>

Sun, 25 Mar 2001 22:16:52 EST

54 lines

New Thread

Epoxy Ink Stripper...

Epoxy Ink Stripper...

Stephen R. Gregory <[log in to unmask]>

Tue, 20 Mar 2001 10:36:31 EST

31 lines

Re: Epoxy Ink Stripper...

Brian Ellis <[log in to unmask]>

Tue, 20 Mar 2001 18:22:40 +0200

60 lines

Re: Epoxy Ink Stripper...

Michael Lester <[log in to unmask]>

Tue, 20 Mar 2001 11:29:17 EST

39 lines

Re: Epoxy Ink Stripper...

Phil Nutting <[log in to unmask]>

Tue, 20 Mar 2001 11:32:35 -0500

85 lines

Re: Epoxy Ink Stripper...

<Rudy Sedlak> <[log in to unmask]>

Tue, 20 Mar 2001 11:42:23 EST

30 lines

Re: Epoxy Ink Stripper...

Barmuta, Mike <[log in to unmask]>

Tue, 20 Mar 2001 09:32:26 -0800

75 lines

Re: Epoxy Ink Stripper...

Marsico, James <[log in to unmask]>

Tue, 20 Mar 2001 12:56:09 -0500

42 lines

Re: Epoxy Ink Stripper...

Timothy Reeves <[log in to unmask]>

Tue, 20 Mar 2001 11:01:08 -0800

48 lines

Re: Epoxy Ink Stripper...

Kasprzak, Bill (sys) USX <[log in to unmask]>

Tue, 20 Mar 2001 14:00:34 -0500

71 lines

Re: Epoxy Ink Stripper...

Houston, Terri <[log in to unmask]>

Tue, 20 Mar 2001 13:06:12 -0600

64 lines

Re: Epoxy Ink Stripper...

Galang, Jerry <[log in to unmask]>

Tue, 20 Mar 2001 11:19:07 -0800

250 lines

Re: Epoxy Ink Stripper...

Mike Fenner <[log in to unmask]>

Tue, 20 Mar 2001 21:45:08 -0000

75 lines

Re: Epoxy Ink Stripper...

<Peter George Duncan> <[log in to unmask]>

Wed, 21 Mar 2001 08:55:23 +0800

77 lines

Re: Epoxy Ink Stripper...

Weiner Mickey <[log in to unmask]>

Wed, 21 Mar 2001 15:34:48 +0200

163 lines

Re: Epoxy Ink Stripper...

Larry J. Fisher <[log in to unmask]>

Sun, 25 Mar 2001 22:09:07 EST

58 lines

Re: Epoxy Ink Stripper...

Brian Ellis <[log in to unmask]>

Mon, 26 Mar 2001 12:11:03 +0300

65 lines

Re: Epoxy Ink Stripper...

Kasprzak, Bill (sys) USX <[log in to unmask]>

Mon, 26 Mar 2001 07:46:54 -0500

66 lines

Re: Epoxy Ink Stripper...

Brian Ellis <[log in to unmask]>

Mon, 26 Mar 2001 18:33:07 +0300

148 lines

Re: Epoxy Ink Stripper...

Hans Shin <[log in to unmask]>

Mon, 26 Mar 2001 08:39:02 -0800

63 lines

Re: Epoxy Ink Stripper...

Phil Crepeau <[log in to unmask]>

Mon, 26 Mar 2001 11:33:56 -0800

74 lines

Re: Epoxy Ink Stripper...

Brian Ellis <[log in to unmask]>

Tue, 27 Mar 2001 10:11:05 +0300

100 lines

Re: Epoxy Ink Stripper...

Graham Naisbitt <[log in to unmask]>

Tue, 27 Mar 2001 13:42:24 +0100

106 lines

New Thread

ESD Floor

ESD Floor

Marsico, James <[log in to unmask]>

Thu, 8 Mar 2001 15:17:40 -0500

32 lines

Re: ESD Floor

Rick Howieson <[log in to unmask]>

Thu, 8 Mar 2001 13:32:35 -0700

57 lines

ESD Floor

John Brewer <[log in to unmask]>

Fri, 9 Mar 2001 08:35:57 -0500

31 lines

Re: ESD Floor

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 12 Mar 2001 12:47:34 -0500

60 lines

Re: ESD Floor

Marsico, James <[log in to unmask]>

Mon, 12 Mar 2001 13:07:00 -0500

104 lines

Re: ESD Floor

Darrel Therriault <[log in to unmask]>

Mon, 12 Mar 2001 10:19:29 -0800

248 lines

Re: ESD Floor

Guy Ramsey <[log in to unmask]>

Mon, 12 Mar 2001 13:14:31 -0500

96 lines

Re: ESD Floor

Campbell, William (wcampbel) <[log in to unmask]>

Tue, 13 Mar 2001 08:33:02 -0500

118 lines

New Thread

ESD Symbol

ESD Symbol

Dave Girard <[log in to unmask]>

Wed, 21 Mar 2001 12:57:48 -0500

21 lines

Re: ESD Symbol

Kuczynski, Michael @ SPACENAV <[log in to unmask]>

Wed, 21 Mar 2001 15:16:44 -0500

29 lines

Re: ESD Symbol

Tom Parkinson - Quality System Manager <[log in to unmask]>

Wed, 21 Mar 2001 15:42:28 -0500

49 lines

Re: ESD Symbol

Dave Girard <[log in to unmask]>

Thu, 22 Mar 2001 13:00:50 -0500

62 lines

New Thread

Etch Rates/Factors and Current Carrying Capacity of Fine lines

Etch Rates/Factors and Current Carrying Capacity of Fine lines

Jana L. Carraway <[log in to unmask]>

Mon, 26 Mar 2001 08:21:13 -0800

48 lines

Re: Etch Rates/Factors and Current Carrying Capacity of Fine lines

Roger M. Stoops <[log in to unmask]>

Mon, 26 Mar 2001 13:02:11 -0500

107 lines

Re: Etch Rates/Factors and Current Carrying Capacity of Fine lines

<Rudy Sedlak> <[log in to unmask]>

Mon, 26 Mar 2001 15:32:24 EST

34 lines

New Thread

Etch Rates/Factors and Current Carrying Capacity of Finelines

Re: Etch Rates/Factors and Current Carrying Capacity of Finelines

Ted Stern <[log in to unmask]>

Mon, 26 Mar 2001 12:41:17 -0600

75 lines

New Thread

Exception to IPC-A-600 Class II minimum via wall plating

Exception to IPC-A-600 Class II minimum via wall plating

Ashley Allen Shepard <[log in to unmask]>

Fri, 9 Mar 2001 08:49:29 -0600

24 lines

Re: Exception to IPC-A-600 Class II minimum via wall plating

Timothy Reeves <[log in to unmask]>

Fri, 9 Mar 2001 13:32:29 -0800

44 lines

New Thread

Exposed Copper

Exposed Copper

Clayton Gardner <[log in to unmask]>

Tue, 13 Mar 2001 12:13:20 +1100

48 lines

Re: Exposed Copper

Craig Hillman <[log in to unmask]>

Tue, 13 Mar 2001 08:54:01 -0500

97 lines

New Thread

fidcial mark missing

fidcial mark missing

IPC Forum <[log in to unmask]>

Fri, 16 Mar 2001 10:36:53 +0800

56 lines

Re: fidcial mark missing

John Parsons <[log in to unmask]>

Fri, 16 Mar 2001 07:45:27 -0800

48 lines

New Thread

Finger Cots

Finger Cots

Betsy Towle <[log in to unmask]>

Tue, 20 Mar 2001 15:26:55 -0600

25 lines

New Thread

Flex circuit questions...

Flex circuit questions...

Stephen R. Gregory <[log in to unmask]>

Tue, 27 Mar 2001 15:26:06 EST

35 lines

Re: Flex circuit questions...

Stephen R. Gregory <[log in to unmask]>

Tue, 27 Mar 2001 22:17:29 EST

50 lines

Re: Flex circuit questions...

DUTTON Phil <[log in to unmask]>

Wed, 28 Mar 2001 13:41:00 +1000

76 lines

New Thread

Flex Circuits?

Flex Circuits?

Brooks,Bill <[log in to unmask]>

Wed, 14 Mar 2001 09:38:50 -0800

31 lines

Re: Flex Circuits?

Neel, Robert <[log in to unmask]>

Wed, 14 Mar 2001 11:50:50 -0600

67 lines

Re: Flex Circuits?

Rick Pfeiffer <[log in to unmask]>

Wed, 14 Mar 2001 13:07:41 -0500

26 lines

Re: Flex Circuits?

<Bob Mcgarry> <[log in to unmask]>

Wed, 14 Mar 2001 16:11:30 -0500

52 lines

Re: Flex Circuits?

Brooks,Bill <[log in to unmask]>

Wed, 14 Mar 2001 15:29:51 -0800

95 lines

Re: Flex Circuits?

PCB <[log in to unmask]>

Mon, 19 Mar 2001 10:52:48 +0900

87 lines

New Thread

Flux dye...

Flux dye...

Stephen R. Gregory <[log in to unmask]>

Fri, 16 Mar 2001 12:09:46 EST

38 lines

Re: Flux dye...

Larry Koens <[log in to unmask]>

Fri, 16 Mar 2001 11:33:55 -0600

88 lines

Re: Flux dye...

Bev Christian <[log in to unmask]>

Fri, 16 Mar 2001 12:47:36 -0500

78 lines

Re: Flux dye...

Marsico, James <[log in to unmask]>

Fri, 16 Mar 2001 12:47:51 -0500

82 lines

Re: Flux dye...

Jason Gregory <[log in to unmask]>

Fri, 16 Mar 2001 11:58:10 -0600

67 lines

Re: Flux dye...

Jon Moore <[log in to unmask]>

Fri, 16 Mar 2001 16:45:58 EST

33 lines

Re: Flux dye...

Stephen R. Gregory <[log in to unmask]>

Fri, 16 Mar 2001 20:25:59 EST

31 lines

Re: Flux dye...

Phil Nutting <[log in to unmask]>

Fri, 16 Mar 2001 12:33:32 -0500

79 lines

Re: Flux dye...

Hans Hinners <[log in to unmask]>

Fri, 16 Mar 2001 19:35:12 -0800

120 lines

Re: Flux dye...

Brian Ellis <[log in to unmask]>

Sat, 17 Mar 2001 10:44:06 +0200

70 lines

Re: Flux dye...

Mike Fenner <[log in to unmask]>

Mon, 19 Mar 2001 10:58:06 -0000

96 lines

Re: Flux dye...

Dieselberg, Ron <[log in to unmask]>

Mon, 19 Mar 2001 06:35:22 -0500

71 lines

Re: Flux dye...

Dieselberg, Ron <[log in to unmask]>

Mon, 19 Mar 2001 06:56:29 -0500

74 lines

Re: Flux dye...

Albin, David <[log in to unmask]>

Mon, 19 Mar 2001 12:26:33 -0000

97 lines

New Thread

Follow-up to solder flux problem

Follow-up to solder flux problem

Paul Baine <[log in to unmask]>

Fri, 23 Mar 2001 07:37:39 -0600

34 lines

Re: Follow-up to solder flux problem

Douglas Pauls <[log in to unmask]>

Fri, 23 Mar 2001 08:24:45 -0600

34 lines

Re: Follow-up to solder flux problem

Guy Ramsey <[log in to unmask]>

Fri, 23 Mar 2001 09:40:42 -0500

67 lines

New Thread

FW: Hipot Test

FW: Hipot Test

Edward H. Uslar <[log in to unmask]>

Tue, 13 Mar 2001 15:35:31 -0500

35 lines

Re: FW: Hipot Test

Douglas McKean <[log in to unmask]>

Thu, 15 Mar 2001 21:22:21 -0500

44 lines

New Thread

FW: new virus

FW: new virus

Ted Tontis <[log in to unmask]>

Wed, 14 Mar 2001 09:10:18 -0600

40 lines

New Thread

Fw: [TN] Solder flux under LCCs

Fw: [TN] Solder flux under LCCs

Eric Christison <[log in to unmask]>

Tue, 20 Mar 2001 10:01:08 -0600

98 lines

New Thread

FW: [TN] Solvent for RTV738

FW: [TN] Solvent for RTV738

Bev Christian <[log in to unmask]>

Thu, 22 Mar 2001 11:49:32 -0500

156 lines

Re: FW: [TN] Solvent for RTV738

Emily Tse <[log in to unmask]>

Thu, 22 Mar 2001 22:59:24 -0500

185 lines

Re: FW: [TN] Solvent for RTV738

DUTTON Phil <[log in to unmask]>

Fri, 23 Mar 2001 15:16:29 +1100

214 lines

Re: FW: [TN] Solvent for RTV738

<Peter George Duncan> <[log in to unmask]>

Fri, 23 Mar 2001 18:21:36 +0800

234 lines

Re: FW: [TN] Solvent for RTV738

Graham Naisbitt <[log in to unmask]>

Fri, 23 Mar 2001 17:02:30 -0000

209 lines

Re: FW: [TN] Solvent for RTV738

Bev Christian <[log in to unmask]>

Fri, 23 Mar 2001 12:31:33 -0500

231 lines

New Thread

Gold Finger Protection

Gold Finger Protection

Wilber Heath <[log in to unmask]>

Wed, 28 Mar 2001 14:22:41 -0600

30 lines

Re: Gold Finger Protection

gleason <[log in to unmask]>

Wed, 28 Mar 2001 14:59:03 -0800

59 lines

Re: Gold Finger Protection

Inbavannan <[log in to unmask]>

Thu, 29 Mar 2001 08:40:50 +0530

60 lines

New Thread

Gold stripping

Gold stripping

Ken Mc Gowan <[log in to unmask]>

Thu, 15 Mar 2001 13:41:02 -0200

60 lines

New Thread

Graph for PCB Laminate Usage

Graph for PCB Laminate Usage

Harold G. Bailey <[log in to unmask]>

Wed, 28 Mar 2001 11:15:04 -0500

22 lines

Re: Graph for PCB Laminate Usage

Roland Jaquet <[log in to unmask]>

Fri, 30 Mar 2001 17:42:13 +0200

158 lines

New Thread

Heat-sinked BGA Bridging...

Re: Heat-sinked BGA Bridging...

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 1 Mar 2001 12:48:15 +0100

48 lines

Re: Heat-sinked BGA Bridging...

Brad Kendall <[log in to unmask]>

Fri, 2 Mar 2001 05:59:33 -0800

186 lines

New Thread

Height of 0402 devices

Height of 0402 devices

Eric Christison <[log in to unmask]>

Tue, 20 Mar 2001 10:04:01 -0600

44 lines

Re: Height of 0402 devices

Finlay Buchan <[log in to unmask]>

Wed, 21 Mar 2001 12:10:03 -0000

87 lines

Re: Height of 0402 devices

Houston, Terri <[log in to unmask]>

Wed, 21 Mar 2001 06:39:22 -0600

77 lines

New Thread

Help, I'm Imbalanced

Help, I'm Imbalanced

Robert Lazzara <[log in to unmask]>

Fri, 2 Mar 2001 08:36:46 EST

70 lines

Re: Help, I'm Imbalanced

Earl Moon <[log in to unmask]>

Thu, 8 Mar 2001 16:25:26 -0600

22 lines

New Thread

hot bar soldering

hot bar soldering

Guy Ramsey <[log in to unmask]>

Tue, 13 Mar 2001 13:13:33 -0500

28 lines

Re: hot bar soldering

Stephen R. Gregory <[log in to unmask]>

Tue, 13 Mar 2001 13:47:21 EST

38 lines

Re: hot bar soldering

Werner Engelmaier <[log in to unmask]>

Wed, 14 Mar 2001 02:18:29 EST

32 lines

Re: hot bar soldering

<Peter George Duncan> <[log in to unmask]>

Wed, 14 Mar 2001 17:27:41 +0800

31 lines

New Thread

How does HASL / FR-4 board cleanliness and humidityrelate tofailure rates?

Re: How does HASL / FR-4 board cleanliness and humidityrelate tofailure rates?

Brian Ellis <[log in to unmask]>

Thu, 1 Mar 2001 09:31:54 +0200

167 lines

New Thread

How to IR REFLOW TEST FOR MODULE PCB?

How to IR REFLOW TEST FOR MODULE PCB?

Gilbert Min <[log in to unmask]>

Thu, 15 Mar 2001 18:14:13 +0900

27 lines

New Thread

HUGE SMT assembly...

HUGE SMT assembly...

Stephen R. Gregory <[log in to unmask]>

Fri, 23 Mar 2001 17:23:39 EST

32 lines

Re: HUGE SMT assembly...

Ryan Grant <[log in to unmask]>

Fri, 23 Mar 2001 15:46:33 -0700

72 lines

Re: HUGE SMT assembly...

Jason Gregory <[log in to unmask]>

Fri, 23 Mar 2001 21:07:58 -0600

62 lines

Re: HUGE SMT assembly...

Peter tremewen <[log in to unmask]>

Sat, 24 Mar 2001 22:27:39 +1100

43 lines

Re: HUGE SMT assembly...

Jon Moore <[log in to unmask]>

Sat, 24 Mar 2001 11:55:15 EST

28 lines

Re: HUGE SMT assembly...

Earl Moon <[log in to unmask]>

Sat, 24 Mar 2001 11:48:13 -0600

31 lines

Re: HUGE SMT assembly...

Kasprzak, Bill (sys) USX <[log in to unmask]>

Mon, 26 Mar 2001 07:25:47 -0500

69 lines

Re: HUGE SMT assembly...

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 26 Mar 2001 13:54:47 -0500

59 lines

Re: HUGE SMT assembly...

Mike Fenner <[log in to unmask]>

Mon, 26 Mar 2001 21:20:41 +0100

114 lines

Re: HUGE SMT assembly...

Earl Moon <[log in to unmask]>

Mon, 26 Mar 2001 14:17:59 -0600

52 lines

Re: HUGE SMT assembly...

michael <[log in to unmask]>

Tue, 27 Mar 2001 09:44:10 +0800

85 lines

Re: HUGE SMT assembly...

Matthew Lamkin <[log in to unmask]>

Tue, 27 Mar 2001 09:10:50 +0100

35 lines

Re: HUGE SMT assembly...

Earl Moon <[log in to unmask]>

Tue, 27 Mar 2001 03:22:06 -0600

20 lines

Re: HUGE SMT assembly...

Brad Kendall <[log in to unmask]>

Tue, 27 Mar 2001 06:18:26 -0800

73 lines

New Thread

Hugh SMT Assembly / Large Area Stencils

Hugh SMT Assembly / Large Area Stencils

fkurisu <[log in to unmask]>

Mon, 26 Mar 2001 17:37:58 -0800

37 lines

New Thread

Hydrobromic vs. Hydrochloric.

Hydrobromic vs. Hydrochloric.

<Rudy Sedlak> <[log in to unmask]>

Thu, 1 Mar 2001 02:47:15 EST

38 lines

Re: Hydrobromic vs. Hydrochloric.

Brian Ellis <[log in to unmask]>

Thu, 1 Mar 2001 10:18:38 +0200

58 lines

Re: Hydrobromic vs. Hydrochloric.

<Rudy Sedlak> <[log in to unmask]>

Thu, 1 Mar 2001 09:35:48 EST

30 lines

Re: Hydrobromic vs. Hydrochloric.

Brian Ellis <[log in to unmask]>

Thu, 1 Mar 2001 19:12:34 +0200

78 lines

Re: Hydrobromic vs. Hydrochloric.

Timothy Reeves <[log in to unmask]>

Fri, 2 Mar 2001 10:22:17 -0800

58 lines

Re: Hydrobromic vs. Hydrochloric.

Timothy Reeves <[log in to unmask]>

Fri, 2 Mar 2001 10:39:47 -0800

47 lines

Re: Hydrobromic vs. Hydrochloric.

<Rudy Sedlak> <[log in to unmask]>

Fri, 2 Mar 2001 17:06:02 EST

39 lines

Re: Hydrobromic vs. Hydrochloric.

Brian Ellis <[log in to unmask]>

Sat, 3 Mar 2001 09:41:28 +0200

65 lines

Re: Hydrobromic vs. Hydrochloric.

Larry J. Fisher <[log in to unmask]>

Sun, 4 Mar 2001 08:30:37 EST

101 lines

New Thread

IC Damage by magnetism?

IC Damage by magnetism?

Richard Hawkins <[log in to unmask]>

Thu, 1 Mar 2001 11:15:52 -0600

34 lines

Re: IC Damage by magnetism?

Neel, Robert <[log in to unmask]>

Thu, 1 Mar 2001 11:55:17 -0600

71 lines

Re: IC Damage by magnetism?

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 2 Mar 2001 09:06:08 +0100

93 lines

Re: IC Damage by magnetism?

Ken Mc Gowan <[log in to unmask]>

Sun, 4 Mar 2001 09:59:17 -0200

107 lines

Re: IC Damage by magnetism?

Ryan Grant <[log in to unmask]>

Fri, 2 Mar 2001 08:36:11 -0700

233 lines

Re: IC Damage by magnetism?

Brian Ellis <[log in to unmask]>

Fri, 2 Mar 2001 18:16:46 +0200

59 lines

Re: IC Damage by magnetism?

Meigs, Jonathan <[log in to unmask]>

Fri, 2 Mar 2001 09:31:37 -0700

103 lines

Re: IC Damage by magnetism?

Olson, Jack <[log in to unmask]>

Fri, 2 Mar 2001 11:57:58 -0600

122 lines

New Thread

Impedance equation

Impedance equation

Tamir Ben Shoshan <[log in to unmask]>

Thu, 15 Mar 2001 11:33:33 +0200

25 lines

Re: Impedance equation

Geoff Layhe <[log in to unmask]>

Thu, 15 Mar 2001 10:25:51 -0000

62 lines

New Thread

Industry standard for audit plans

Industry standard for audit plans

Kevin Stokes <[log in to unmask]>

Thu, 29 Mar 2001 14:41:05 -0500

88 lines

New Thread

Insufficient Solder Joints

Re: Insufficient Solder Joints

Werner Engelmaier <[log in to unmask]>

Thu, 1 Mar 2001 01:47:26 EST

28 lines

New Thread

IPC Designers Council Meeting : WED, MAR 28, 6PM @ Hallmark Circ uits, Poway, CA

IPC Designers Council Meeting : WED, MAR 28, 6PM @ Hallmark Circ uits, Poway, CA

Brooks,Bill <[log in to unmask]>

Mon, 26 Mar 2001 14:06:04 -0800

109 lines

New Thread

IPC REGULATORY ALERT - MEMBERS HELP NEEDED TO GATHER DATA TO DISPUTE THE MP&M RULE

IPC REGULATORY ALERT - MEMBERS HELP NEEDED TO GATHER DATA TO DISPUTE THE MP&M RULE

Keach Sasamori <[log in to unmask]>

Fri, 2 Mar 2001 14:31:36 -0600

79 lines

New Thread

IPC-9261

IPC-9261

Yves.Dupuis <[log in to unmask]>

Tue, 6 Mar 2001 10:14:40 -0500

30 lines

New Thread

Kapton Tape and ESD Concerns

Kapton Tape and ESD Concerns

Rich Lasko <[log in to unmask]>

Wed, 28 Mar 2001 14:35:23 -0600

33 lines

Re: Kapton Tape and ESD Concerns

Brian Holt <[log in to unmask]>

Wed, 28 Mar 2001 13:44:56 -0700

67 lines

Re: Kapton Tape and ESD Concerns

gleason <[log in to unmask]>

Wed, 28 Mar 2001 15:09:36 -0800

64 lines

Re: Kapton Tape and ESD Concerns

Lee Whiteman <[log in to unmask]>

Thu, 29 Mar 2001 03:59:50 -0500

70 lines

Re: Kapton Tape and ESD Concerns

Phil Crepeau <[log in to unmask]>

Wed, 28 Mar 2001 13:01:18 -0800

57 lines

Re: Kapton Tape and ESD Concerns

pratap <[log in to unmask]>

Wed, 28 Mar 2001 15:13:01 -0800

35 lines

Re: Kapton Tape and ESD Concerns

gleason <[log in to unmask]>

Wed, 28 Mar 2001 15:33:10 -0800

64 lines

Re: Kapton Tape and ESD Concerns

Alan Kreplick <[log in to unmask]>

Wed, 28 Mar 2001 16:58:58 -0500

97 lines

Re: Kapton Tape and ESD Concerns

[log in to unmask]

Wed, 28 Mar 2001 16:49:57 -0600

125 lines

Re: Kapton Tape and ESD Concerns

Rich Lasko <[log in to unmask]>

Thu, 29 Mar 2001 06:42:22 -0600

127 lines

New Thread

Lacing Tape

Lacing Tape

bbarr <[log in to unmask]>

Fri, 30 Mar 2001 09:29:37 -0500

38 lines

Re: Lacing Tape

Terveen, James @ NARDAEAST <[log in to unmask]>

Fri, 30 Mar 2001 11:19:36 -0500

64 lines

Re: Lacing Tape

Jack Crawford <[log in to unmask]>

Fri, 30 Mar 2001 14:34:15 -0600

224 lines

New Thread

Laminated FR4 Standard Sheet Size?

Laminated FR4 Standard Sheet Size?

Hiteshew, Michael <[log in to unmask]>

Wed, 28 Mar 2001 15:21:31 -0500

36 lines

Re: Laminated FR4 Standard Sheet Size?

김선동 <[log in to unmask]>

Thu, 29 Mar 2001 09:25:17 +0900

60 lines

Re: Laminated FR4 Standard Sheet Size?

DUTTON Phil <[log in to unmask]>

Thu, 29 Mar 2001 10:26:44 +1000

97 lines

Re: Laminated FR4 Standard Sheet Size?

PCBA <[log in to unmask]>

Thu, 29 Mar 2001 09:42:10 +0800

37 lines

Re: Laminated FR4 Standard Sheet Size?

Hans Hinners <[log in to unmask]>

Wed, 28 Mar 2001 17:52:17 -0800

94 lines

New Thread

Layer to Layer registration

Layer to Layer registration

Lam, Patrick <[log in to unmask]>

Mon, 12 Mar 2001 10:01:00 -0800

30 lines

Re: Layer to Layer registration

Roger M. Stoops <[log in to unmask]>

Mon, 12 Mar 2001 13:53:30 -0500

82 lines

Re: Layer to Layer registration

Alain Savard <[log in to unmask]>

Mon, 12 Mar 2001 13:49:16 -0500

60 lines

New Thread

Lead tarnish on FPT

Lead tarnish on FPT

Sherman Banks <[log in to unmask]>

Fri, 9 Mar 2001 09:34:33 -0800

46 lines

Re: Lead tarnish on FPT

Larry Tawyea <[log in to unmask]>

Fri, 9 Mar 2001 12:55:58 EST

43 lines

New Thread

Looking for First Article forms for PCB and PCBA

Looking for First Article forms for PCB and PCBA

Ken Patel <[log in to unmask]>

Mon, 5 Mar 2001 14:01:46 -0800

25 lines

New Thread

Low aspect definition

Low aspect definition

Michael Simms <[log in to unmask]>

Thu, 29 Mar 2001 11:18:58 -0600

44 lines

New Thread

Mark Orlowski/PEMSTAR Inc is out of the office.

Mark Orlowski/PEMSTAR Inc is out of the office.

Mark Orlowski <[log in to unmask]>

Mon, 19 Mar 2001 01:02:10 -0600

23 lines

New Thread

Martin Marieta vs. IPC comparison

Martin Marieta vs. IPC comparison

Kevin Stokes <[log in to unmask]>

Tue, 27 Mar 2001 08:25:23 -0500

66 lines

New Thread

Material handling trays

Material handling trays

West, Jim <[log in to unmask]>

Thu, 8 Mar 2001 16:41:48 -0500

34 lines

Re: Material handling trays

gleason <[log in to unmask]>

Thu, 8 Mar 2001 16:42:42 -0800

66 lines

New Thread

materials

Re: materials

Roland Jaquet <[log in to unmask]>

Thu, 1 Mar 2001 16:20:34 +0100

138 lines

New Thread

Maximum Thickness of Concoat

Maximum Thickness of Concoat

Roger M. Stoops <[log in to unmask]>

Fri, 2 Mar 2001 11:29:03 -0500

41 lines

Re: Maximum Thickness of Concoat

Graham Naisbitt <[log in to unmask]>

Fri, 2 Mar 2001 17:44:14 -0000

111 lines

Re: Maximum Thickness of Concoat

Phil Crepeau <[log in to unmask]>

Fri, 2 Mar 2001 10:55:32 -0800

65 lines

Re: Maximum Thickness of Concoat

Graham Naisbitt <[log in to unmask]>

Fri, 2 Mar 2001 22:09:26 -0000

149 lines

Re: Maximum Thickness of Concoat

David Douthit <[log in to unmask]>

Fri, 2 Mar 2001 17:46:04 -0700

64 lines

New Thread

Mechanical Calculation

Mechanical Calculation

Darrel Therriault <[log in to unmask]>

Mon, 12 Mar 2001 13:40:51 -0800

91 lines

Re: Mechanical Calculation

pratap <[log in to unmask]>

Tue, 13 Mar 2001 10:30:48 -0800

30 lines

New Thread

microscopes

microscopes

Campbell, William (wcampbel) <[log in to unmask]>

Thu, 1 Mar 2001 11:31:02 -0500

28 lines

New Thread

MicroVia In Pad Vs Silver VIA fill

MicroVia In Pad Vs Silver VIA fill

Michael Forrester <[log in to unmask]>

Thu, 8 Mar 2001 16:25:24 -0500

38 lines

Re: MicroVia In Pad Vs Silver VIA fill

Earl Moon <[log in to unmask]>

Thu, 8 Mar 2001 16:10:07 -0600

34 lines

Re: MicroVia In Pad Vs Silver VIA fill

Earl Moon <[log in to unmask]>

Thu, 8 Mar 2001 23:18:42 -0600

35 lines

Re: MicroVia In Pad Vs Silver VIA fill

Marsico, James <[log in to unmask]>

Fri, 9 Mar 2001 07:45:15 -0500

85 lines

Re: MicroVia In Pad Vs Silver VIA fill

Smith-BCD, Richard <[log in to unmask]>

Fri, 9 Mar 2001 09:26:32 -0600

104 lines

Re: MicroVia In Pad Vs Silver VIA fill

Robert Vanech <[log in to unmask]>

Fri, 9 Mar 2001 15:34:29 +0000

71 lines

Re: MicroVia In Pad Vs Silver VIA fill

Ryan Grant <[log in to unmask]>

Fri, 9 Mar 2001 11:07:57 -0700

81 lines

Re: MicroVia In Pad Vs Silver VIA fill

Earl Moon <[log in to unmask]>

Fri, 9 Mar 2001 13:39:06 -0600

21 lines

Re: MicroVia In Pad Vs Silver VIA fill

Michael Forrester <[log in to unmask]>

Fri, 9 Mar 2001 17:27:28 -0500

65 lines

Re: MicroVia In Pad Vs Silver VIA fill

Earl Moon <[log in to unmask]>

Fri, 9 Mar 2001 17:00:40 -0600

22 lines

Re: MicroVia In Pad Vs Silver VIA fill

Earl Moon <[log in to unmask]>

Sat, 10 Mar 2001 06:00:52 -0600

51 lines

New Thread

MIL- 105D or MIL-105E? What is new one?

MIL- 105D or MIL-105E? What is new one?

Ken Patel <[log in to unmask]>

Wed, 7 Mar 2001 10:12:12 -0800

25 lines

Re: MIL- 105D or MIL-105E? What is new one?

Phil Crepeau <[log in to unmask]>

Wed, 7 Mar 2001 10:42:42 -0800

51 lines

Re: MIL- 105D or MIL-105E? What is new one?

Smith, William (SAO) <[log in to unmask]>

Wed, 7 Mar 2001 15:57:58 -0300

55 lines

Re: MIL- 105D or MIL-105E? What is new one?

Lou Hart <[log in to unmask]>

Wed, 7 Mar 2001 14:06:16 -0500

54 lines

Re: MIL- 105D or MIL-105E? What is new one?

Keel, Mike <[log in to unmask]>

Wed, 7 Mar 2001 13:02:03 -0800

100 lines

Re: MIL- 105D or MIL-105E? What is new one?

Lou Hart <[log in to unmask]>

Wed, 7 Mar 2001 17:15:55 -0500

158 lines

New Thread

MIL-P-13949 replaced by MIL-S-13949?

MIL-P-13949 replaced by MIL-S-13949?

Ken Fong <[log in to unmask]>

Thu, 8 Mar 2001 09:31:54 +0800

25 lines

Re: MIL-P-13949 replaced by MIL-S-13949?

Stephen R. Gregory <[log in to unmask]>

Wed, 7 Mar 2001 20:59:43 EST

29 lines

Re: MIL-P-13949 replaced by MIL-S-13949?

Ken Fong <[log in to unmask]>

Thu, 8 Mar 2001 13:14:54 +0800

53 lines

Re: MIL-P-13949 replaced by MIL-S-13949?

Fred Elsis <[log in to unmask]>

Thu, 8 Mar 2001 04:56:57 -0500

42 lines

Re: MIL-P-13949 replaced by MIL-S-13949?

Timothy Reeves <[log in to unmask]>

Thu, 8 Mar 2001 08:45:28 -0800

39 lines

New Thread

MIL-P-55110D

MIL-P-55110D

Mark Charlton <[log in to unmask]>

Wed, 7 Mar 2001 08:02:19 -0500

61 lines

Re: MIL-P-55110D

Stephen R. Gregory <[log in to unmask]>

Wed, 7 Mar 2001 08:43:53 EST

36 lines

Re: MIL-P-55110D

Lee Whiteman <[log in to unmask]>

Wed, 7 Mar 2001 09:21:07 -0500

146 lines

New Thread

Mission impossible or is it?

Mission impossible or is it?

Iain Braddock <[log in to unmask]>

Tue, 27 Mar 2001 12:26:31 +0100

48 lines

Re: Mission impossible or is it?

Guy Ramsey <[log in to unmask]>

Tue, 27 Mar 2001 07:45:47 -0500

80 lines

Re: Mission impossible or is it?

Brian Ellis <[log in to unmask]>

Tue, 27 Mar 2001 18:34:27 +0300

63 lines

Re: Mission impossible or is it?

Anderson, Greg (IndSys, GEFanuc, NA) <[log in to unmask]>

Tue, 27 Mar 2001 10:47:15 -0500

206 lines

Re: Mission impossible or is it?

Earl Moon <[log in to unmask]>

Tue, 27 Mar 2001 13:10:31 -0600

27 lines

Re: Mission impossible or is it?

Iain Braddock <[log in to unmask]>

Wed, 28 Mar 2001 08:22:43 +0100

43 lines

New Thread

Nc&Oc

Nc&Oc

lckang <[log in to unmask]>

Mon, 5 Mar 2001 15:18:13 +0800

60 lines

Re: Nc&Oc

Jack Crawford <[log in to unmask]>

Mon, 5 Mar 2001 11:13:02 -0600

220 lines

Re: Nc&Oc

lckang <[log in to unmask]>

Tue, 6 Mar 2001 09:15:41 +0800

237 lines

New Thread

Need Wire

Need Wire

Robert Vanech <[log in to unmask]>

Thu, 8 Mar 2001 18:12:55 +0000

26 lines

Re: Need Wire

William <[log in to unmask]>

Thu, 8 Mar 2001 11:55:43 -0700

75 lines

Re: Need Wire

Stephen R. Gregory <[log in to unmask]>

Thu, 8 Mar 2001 14:12:17 EST

51 lines

Re: Need Wire

Robert Vanech <[log in to unmask]>

Fri, 9 Mar 2001 15:50:41 +0000

25 lines

New Thread

New Viruses

New Viruses

Thomas Bauer <[log in to unmask]>

Fri, 2 Mar 2001 08:28:46 -0800

42 lines

Re: New Viruses

McGlaughlin, Jeffrey A <[log in to unmask]>

Fri, 2 Mar 2001 11:53:09 -0500

74 lines

Re: New Viruses

Hans Shin <[log in to unmask]>

Fri, 2 Mar 2001 08:57:47 -0800

57 lines

Re: New Viruses

Ahne Oosterhof <[log in to unmask]>

Fri, 2 Mar 2001 09:02:15 -0800

44 lines

Re: New Viruses

Roger M. Stoops <[log in to unmask]>

Fri, 2 Mar 2001 12:02:32 -0500

101 lines

New Thread

No Clean and lubricating oils

No Clean and lubricating oils

Kamalesh Dhaneshwar <[log in to unmask]>

Mon, 12 Mar 2001 13:48:39 -0600

23 lines

New Thread

Non -Technical TN fraction's message

Non -Technical TN fraction's message

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 9 Mar 2001 16:22:15 +0100

27 lines

Re: Non -Technical TN fraction's message

Creswick <[log in to unmask]>

Sun, 11 Mar 2001 18:44:55 -0500

48 lines

New Thread

Optimum Baume Ferric Chloride For Stainless Steel

Optimum Baume Ferric Chloride For Stainless Steel

Larry J. Fisher <[log in to unmask]>

Sun, 4 Mar 2001 07:58:19 EST

52 lines

Re: Optimum Baume Ferric Chloride For Stainless Steel

<Rudy Sedlak> <[log in to unmask]>

Sun, 4 Mar 2001 10:11:58 EST

31 lines

Re: Optimum Baume Ferric Chloride For Stainless Steel

John Nelson <[log in to unmask]>

Mon, 5 Mar 2001 08:06:18 -0500

187 lines

New Thread

Oval BGA Pads

Oval BGA Pads

DUTTON Phil <[log in to unmask]>

Thu, 29 Mar 2001 16:39:54 +1000

29 lines

Re: Oval BGA Pads

<Peter George Duncan> <[log in to unmask]>

Thu, 29 Mar 2001 16:30:30 +0800

77 lines

Re: Oval BGA Pads

Werner Engelmaier <[log in to unmask]>

Thu, 29 Mar 2001 08:08:56 EST

31 lines

New Thread

Oval Pads Article

Oval Pads Article

ALTUS Brendan <[log in to unmask]>

Fri, 30 Mar 2001 11:10:25 +1000

60 lines

New Thread

Oxide examination

Oxide examination

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 19 Mar 2001 13:48:37 +0100

51 lines

Re: Oxide examination

Wenger, George M (George) <[log in to unmask]>

Mon, 19 Mar 2001 07:58:23 -0500

99 lines

Re: Oxide examination

Phillip E. Hinton <[log in to unmask]>

Mon, 19 Mar 2001 09:58:05 EST

27 lines

New Thread

Packaging Development Equipment?

Packaging Development Equipment?

Michael McInerney <[log in to unmask]>

Wed, 28 Mar 2001 08:21:57 -0500

34 lines

Re: Packaging Development Equipment?

Bill Christoffel <[log in to unmask]>

Wed, 28 Mar 2001 07:33:24 -0600

64 lines

New Thread

Part Sticking to Top Tape?

Part Sticking to Top Tape?

bbarr <[log in to unmask]>

Fri, 9 Mar 2001 16:46:53 -0500

47 lines

Re: Part Sticking to Top Tape?

Jowan Iven <[log in to unmask]>

Mon, 12 Mar 2001 07:57:55 +0100

85 lines

Re: Part Sticking to Top Tape?

David Fish <[log in to unmask]>

Mon, 12 Mar 2001 20:59:18 -0800

88 lines

New Thread

PBGA Cold solder joints

Re: PBGA Cold solder joints

Lisa Anderson <[log in to unmask]>

Tue, 6 Mar 2001 09:59:23 -0800

119 lines

Re: PBGA Cold solder joints

Werner Engelmaier <[log in to unmask]>

Tue, 6 Mar 2001 16:28:48 EST

31 lines

Re: PBGA Cold solder joints

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 7 Mar 2001 08:47:17 +0100

139 lines

New Thread

PCB Design Conference Opportunity for the Design Industry

PCB Design Conference Opportunity for the Design Industry

Barbara Burcham <[log in to unmask]>

Fri, 9 Mar 2001 14:47:34 -0600

58 lines

PCB Design Conference Opportunity for the Design Industry

Barbara Burcham <[log in to unmask]>

Fri, 9 Mar 2001 14:51:46 -0600

59 lines

New Thread

PCB FAB

PCB FAB

Darnell, Barry (IndSys, GEFanuc, CDI) <[log in to unmask]>

Thu, 15 Mar 2001 11:36:42 -0500

44 lines

New Thread

PCB Manufacturer

PCB Manufacturer

Tamir Ben Shoshan <[log in to unmask]>

Tue, 27 Mar 2001 18:24:43 +0200

25 lines

Re: PCB Manufacturer

Earl Moon <[log in to unmask]>

Tue, 27 Mar 2001 13:21:49 -0600

42 lines

New Thread

PCB Material Spec

PCB Material Spec

Ken Brown <[log in to unmask]>

Tue, 6 Mar 2001 18:23:38 -0500

22 lines

Re: PCB Material Spec

gleason <[log in to unmask]>

Tue, 6 Mar 2001 19:30:34 -0800

50 lines

New Thread

PCB Scoring spec

PCB Scoring spec

Mark Hargreaves <[log in to unmask]>

Wed, 21 Mar 2001 16:08:20 -0500

24 lines

Re: PCB Scoring spec

DUTTON Phil <[log in to unmask]>

Thu, 22 Mar 2001 10:07:35 +1100

80 lines

Re: PCB Scoring spec

Phil Nutting <[log in to unmask]>

Thu, 22 Mar 2001 09:46:30 -0500

66 lines

New Thread

pH sensing for Ammonia etcher

pH sensing for Ammonia etcher

peter blokhuis <[log in to unmask]>

Thu, 15 Mar 2001 12:21:10 -0800

33 lines

New Thread

Photographic Paper

Photographic Paper

Emily Tse <[log in to unmask]>

Thu, 22 Mar 2001 02:25:31 -0500

49 lines

Re: Photographic Paper

Brian McCrory <[log in to unmask]>

Thu, 22 Mar 2001 10:02:54 -0800

76 lines

Re: Photographic Paper

Ken Mc Gowan <[log in to unmask]>

Thu, 22 Mar 2001 23:31:24 -0200

88 lines

New Thread

Potting in PTFE enclosure

Potting in PTFE enclosure

DUTTON Phil <[log in to unmask]>

Thu, 22 Mar 2001 11:02:47 +1100

59 lines

Re: Potting in PTFE enclosure

Phil Crepeau <[log in to unmask]>

Wed, 21 Mar 2001 17:08:52 -0800

84 lines

Re: Potting in PTFE enclosure

<Peter George Duncan> <[log in to unmask]>

Thu, 22 Mar 2001 09:24:58 +0800

143 lines

Re: Potting in PTFE enclosure

Vandendolder, Ron <[log in to unmask]>

Thu, 22 Mar 2001 08:23:23 -0500

96 lines

Re: Potting in PTFE enclosure

DUTTON Phil <[log in to unmask]>

Fri, 23 Mar 2001 12:24:03 +1100

30 lines

Re: Potting in PTFE enclosure

Phil Crepeau <[log in to unmask]>

Fri, 23 Mar 2001 09:53:49 -0800

54 lines

New Thread

Press-fit

Press-fit

Horaud, Walter <[log in to unmask]>

Wed, 28 Mar 2001 14:52:57 +0200

35 lines

Re: Press-fit

Phil Crepeau <[log in to unmask]>

Wed, 28 Mar 2001 09:21:24 -0800

64 lines

New Thread

PTH-to-SMT...

PTH-to-SMT...

Stephen R. Gregory <[log in to unmask]>

Thu, 22 Mar 2001 15:11:16 EST

38 lines

Re: PTH-to-SMT...

Ted Tontis <[log in to unmask]>

Thu, 22 Mar 2001 14:21:31 -0600

66 lines

Re: PTH-to-SMT...

Jeff Seeger <[log in to unmask]>

Thu, 22 Mar 2001 16:12:04 -0500

50 lines

Re: PTH-to-SMT...

<Peter George Duncan> <[log in to unmask]>

Mon, 26 Mar 2001 07:54:28 +0800

85 lines

New Thread

pumping concoat

Re: pumping concoat

Graham Naisbitt <[log in to unmask]>

Thu, 1 Mar 2001 18:06:59 -0000

105 lines

New Thread

PWB FABRICATION

PWB FABRICATION

Marsico, James <[log in to unmask]>

Tue, 13 Mar 2001 10:53:14 -0500

30 lines

Re: PWB FABRICATION

Yehuda Weisz <[log in to unmask]>

Wed, 14 Mar 2001 23:30:56 +0200

87 lines

New Thread

Quality of Etching

Quality of Etching

Emily Tse <[log in to unmask]>

Mon, 5 Mar 2001 08:39:14 -0500

36 lines

Quality of Etching

Emily Tse <[log in to unmask]>

Sun, 11 Mar 2001 22:04:27 -0500

48 lines

Re: Quality of Etching

<Rudy Sedlak> <[log in to unmask]>

Sun, 11 Mar 2001 23:21:24 EST

62 lines

Re: Quality of Etching

Edward Szpruch <[log in to unmask]>

Mon, 12 Mar 2001 11:03:05 +0200

159 lines

Re: Quality of Etching

Doty, Mike <[log in to unmask]>

Mon, 12 Mar 2001 15:07:12 -0500

207 lines

New Thread

Reballing concern

Reballing concern

Brad Kendall <[log in to unmask]>

Fri, 2 Mar 2001 06:05:28 -0800

196 lines

Re: Reballing concern

Ted Tontis <[log in to unmask]>

Fri, 2 Mar 2001 09:19:09 -0600

226 lines

Re: Reballing concern

d. terstegge <[log in to unmask]>

Fri, 2 Mar 2001 16:27:24 +0100

231 lines

Re: Reballing concern

Paul Fly <[log in to unmask]>

Fri, 2 Mar 2001 10:59:00 -0500

272 lines

Re: Reballing concern

Gabriela Bogdan <[log in to unmask]>

Fri, 2 Mar 2001 20:11:50 +0200

442 lines

Re: Reballing concern

Marsico, James <[log in to unmask]>

Fri, 2 Mar 2001 13:05:54 -0500

536 lines

Re: Reballing concern

d. terstegge <[log in to unmask]>

Mon, 5 Mar 2001 09:12:19 +0100

512 lines

Re: Reballing concern

Lisa Anderson <[log in to unmask]>

Thu, 8 Mar 2001 14:30:56 -0800

250 lines

New Thread

Reflow/Stencil design classes

Reflow/Stencil design classes

Danny W. Harkins <[log in to unmask]>

Thu, 29 Mar 2001 13:14:38 -0500

45 lines

Re: Reflow/Stencil design classes

Hans Hinners <[log in to unmask]>

Thu, 29 Mar 2001 16:24:15 -0800

110 lines

New Thread

Reliability of Solders

Reliability of Solders

Jonathan A Noquil <[log in to unmask]>

Tue, 27 Mar 2001 09:10:31 +0800

26 lines

Re: Reliability of Solders

<Peter George Duncan> <[log in to unmask]>

Tue, 27 Mar 2001 09:39:54 +0800

72 lines

New Thread

Residual Nickel on flex circuit

Residual Nickel on flex circuit

Jon Moore <[log in to unmask]>

Thu, 22 Mar 2001 10:14:56 EST

23 lines

New Thread

Rework profil for BGA

Rework profil for BGA

Julien Bouchard <[log in to unmask]>

Wed, 14 Mar 2001 19:12:21 -0500

50 lines

Re: Rework profil for BGA

<Peter George Duncan> <[log in to unmask]>

Thu, 15 Mar 2001 10:24:34 +0800

150 lines

Re: Rework profil for BGA

Lisa Anderson <[log in to unmask]>

Mon, 19 Mar 2001 05:19:32 -0800

111 lines

Re: Rework profil for BGA

Francois Monette <[log in to unmask]>

Tue, 20 Mar 2001 08:58:24 -0500

109 lines

New Thread

RF Assembly Issues

RF Assembly Issues

Marty Brooks <[log in to unmask]>

Wed, 28 Mar 2001 13:41:17 -0800

50 lines

Re: RF Assembly Issues

Phil Crepeau <[log in to unmask]>

Wed, 28 Mar 2001 16:21:46 -0800

78 lines

Re: RF Assembly Issues

Sauer, Steven T. <[log in to unmask]>

Thu, 29 Mar 2001 07:04:23 -0500

47 lines

Re: RF Assembly Issues

Marsico, James <[log in to unmask]>

Thu, 29 Mar 2001 07:49:58 -0500

101 lines

Re: RF Assembly Issues

David Hillman <[log in to unmask]>

Thu, 29 Mar 2001 07:29:25 -0600

79 lines

Re: RF Assembly Issues

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 29 Mar 2001 16:51:14 +0200

139 lines

Re: RF Assembly Issues

Marty Brooks <[log in to unmask]>

Thu, 29 Mar 2001 15:11:43 -0800

229 lines

Re: RF Assembly Issues

Phil Crepeau <[log in to unmask]>

Fri, 30 Mar 2001 08:00:19 -0800

253 lines

New Thread

RFU2

RFU2

Earl Moon <[log in to unmask]>

Thu, 1 Mar 2001 15:13:55 -0600

40 lines

Re: RFU2

Stephen R. Gregory <[log in to unmask]>

Thu, 1 Mar 2001 16:34:03 EST

33 lines

Re: RFU2

Earl Moon <[log in to unmask]>

Thu, 1 Mar 2001 17:24:40 -0600

28 lines

Re: RFU2

Campbell, William (wcampbel) <[log in to unmask]>

Fri, 2 Mar 2001 14:16:47 -0500

72 lines

New Thread

routing top layer material - yes or no?

routing top layer material - yes or no?

PCBA <[log in to unmask]>

Thu, 15 Mar 2001 13:58:00 +0800

38 lines

Re: routing top layer material - yes or no?

Yehuda Weisz <[log in to unmask]>

Wed, 21 Mar 2001 21:43:25 +0200

99 lines

New Thread

Screened on resistance

Screened on resistance

Mark Mainland <[log in to unmask]>

Wed, 7 Mar 2001 11:27:55 -0600

34 lines

Re: Screened on resistance

Frank Barber <[log in to unmask]>

Wed, 7 Mar 2001 15:03:07 -0500

70 lines

New Thread

Selection of Test Voltage for fab testing...

Selection of Test Voltage for fab testing...

Ken Patel <[log in to unmask]>

Tue, 20 Mar 2001 13:42:36 -0800

30 lines

New Thread

SM Paste Print to Pick-n-Place

SM Paste Print to Pick-n-Place

Hamilton, Richard CLE 4454 <[log in to unmask]>

Mon, 26 Mar 2001 16:58:30 -0700

36 lines

Re: SM Paste Print to Pick-n-Place

Stephen R. Gregory <[log in to unmask]>

Mon, 26 Mar 2001 19:37:28 EST

58 lines

New Thread

Small Hole PTH Reliability in PWB's

Re: Small Hole PTH Reliability in PWB's

Werner Engelmaier <[log in to unmask]>

Thu, 1 Mar 2001 01:47:29 EST

26 lines

New Thread

Soft Gold Over Copper

Soft Gold Over Copper

[log in to unmask]

Thu, 1 Mar 2001 21:58:13 EST

25 lines

Re: Soft Gold Over Copper

Karen Tellefsen <[log in to unmask]>

Thu, 1 Mar 2001 22:22:17 -0500

58 lines

Re: Soft Gold Over Copper

<Rudy Sedlak> <[log in to unmask]>

Thu, 1 Mar 2001 22:50:22 EST

27 lines

Re: Soft Gold Over Copper

pratap <[log in to unmask]>

Fri, 2 Mar 2001 15:59:27 -0800

45 lines

Re: Soft Gold Over Copper

David Hillman <[log in to unmask]>

Fri, 2 Mar 2001 17:35:37 -0600

115 lines

New Thread

Software

Software

Don Anderson <[log in to unmask]>

Wed, 28 Mar 2001 14:22:33 -0500

68 lines

New Thread

Solder balls after wave soldering

Solder balls after wave soldering

Rich Lasko <[log in to unmask]>

Tue, 20 Mar 2001 12:22:29 -0600

34 lines

Re: Solder balls after wave soldering

Stephen R. Gregory <[log in to unmask]>

Tue, 20 Mar 2001 20:24:13 EST

41 lines

New Thread

Solder flux under LCCs

Solder flux under LCCs

Paul Baine <[log in to unmask]>

Tue, 20 Mar 2001 09:23:14 -0600

48 lines

Re: Solder flux under LCCs

Brian Ellis <[log in to unmask]>

Tue, 20 Mar 2001 18:16:46 +0200

84 lines

Re: Solder flux under LCCs

Cyker, Howard A (Howie) <[log in to unmask]>

Tue, 20 Mar 2001 11:17:44 -0500

92 lines

Re: Solder flux under LCCs

Kathy Kuhlow <[log in to unmask]>

Tue, 20 Mar 2001 10:20:20 -0600

51 lines

Re: Solder flux under LCCs

Phil Crepeau <[log in to unmask]>

Tue, 20 Mar 2001 08:24:27 -0800

80 lines

Re: Solder flux under LCCs

Marsico, James <[log in to unmask]>

Tue, 20 Mar 2001 12:53:44 -0500

155 lines

Re: Solder flux under LCCs

<Peter George Duncan> <[log in to unmask]>

Wed, 21 Mar 2001 09:04:04 +0800

103 lines

Re: Solder flux under LCCs

Werner Engelmaier <[log in to unmask]>

Tue, 20 Mar 2001 21:01:15 EST

31 lines

New Thread

Solder Stop affecting LPISM adhesion of pad openings on Copper Groun...

Re: Solder Stop affecting LPISM adhesion of pad openings on Copper Groun...

<Rudy Sedlak> <[log in to unmask]>

Fri, 9 Mar 2001 16:49:19 EST

41 lines

New Thread

Solder Stop affecting LPISM adhesion of pad openings on Copper Groundplanes

Solder Stop affecting LPISM adhesion of pad openings on Copper Groundplanes

Craig Ropp <[log in to unmask]>

Fri, 9 Mar 2001 12:55:38 -0600

44 lines

Re: Solder Stop affecting LPISM adhesion of pad openings on Copper Groundplanes

Guy Ramsey <[log in to unmask]>

Fri, 9 Mar 2001 14:53:30 -0500

87 lines

Re: Solder Stop affecting LPISM adhesion of pad openings on Copper Groundplanes

Barmuta, Mike <[log in to unmask]>

Fri, 9 Mar 2001 14:48:11 -0800

113 lines

New Thread

Solder Stop affecting LPISM adhesion of pad openings onCopperGroundp...

Re: Solder Stop affecting LPISM adhesion of pad openings onCopperGroundp...

Larry J. Fisher <[log in to unmask]>

Sat, 10 Mar 2001 08:52:18 EST

120 lines

New Thread

Solder Stop affecting LPISM adhesion of pad openings onCopperGroundplanes

Re: Solder Stop affecting LPISM adhesion of pad openings onCopperGroundplanes

Kathy Kuhlow <[log in to unmask]>

Fri, 9 Mar 2001 15:30:26 -0600

161 lines

Re: Solder Stop affecting LPISM adhesion of pad openings onCopperGroundplanes

Brian Ellis <[log in to unmask]>

Sat, 10 Mar 2001 10:04:34 +0200

106 lines

New Thread

Solderability

Solderability

Mike Bailey <[log in to unmask]>

Mon, 26 Mar 2001 08:01:12 -0800

56 lines

Re: Solderability

Kathy Kuhlow <[log in to unmask]>

Mon, 26 Mar 2001 10:26:05 -0600

165 lines

Re: Solderability

Phil Crepeau <[log in to unmask]>

Mon, 26 Mar 2001 11:37:47 -0800

80 lines

Re: Solderability

<Peter George Duncan> <[log in to unmask]>

Tue, 27 Mar 2001 08:16:07 +0800

113 lines

Re: Solderability

[log in to unmask]

Mon, 26 Mar 2001 21:17:55 EST

49 lines

Re: Solderability

David Hillman <[log in to unmask]>

Tue, 27 Mar 2001 15:56:56 -0600

86 lines

New Thread

Soldering

Soldering

Noble, Ed <[log in to unmask]>

Thu, 15 Mar 2001 15:23:41 -0500

44 lines

Re: Soldering

Earl Moon <[log in to unmask]>

Thu, 15 Mar 2001 15:07:21 -0600

25 lines

Re: Soldering

Phil Crepeau <[log in to unmask]>

Thu, 15 Mar 2001 14:33:21 -0800

68 lines

Re: Soldering

Mike McMahon <[log in to unmask]>

Thu, 15 Mar 2001 16:58:56 -0700

83 lines

Re: Soldering

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 16 Mar 2001 08:53:30 +0100

90 lines

Re: Soldering

Brian Ellis <[log in to unmask]>

Fri, 16 Mar 2001 11:09:33 +0200

71 lines

New Thread

soldering to stainless

soldering to stainless

[log in to unmask]

Fri, 23 Mar 2001 08:35:07 -0600

33 lines

Re: soldering to stainless

Kathy Kuhlow <[log in to unmask]>

Fri, 23 Mar 2001 08:57:46 -0600

64 lines

Re: soldering to stainless

Marsico, James <[log in to unmask]>

Fri, 23 Mar 2001 10:02:00 -0500

82 lines

Re: soldering to stainless

Brian Ellis <[log in to unmask]>

Fri, 23 Mar 2001 17:28:26 +0200

62 lines

Re: soldering to stainless

Guy Ramsey <[log in to unmask]>

Fri, 23 Mar 2001 10:19:36 -0500

116 lines

Re: soldering to stainless

Phil Nutting <[log in to unmask]>

Fri, 23 Mar 2001 13:34:28 -0500

89 lines

Re: soldering to stainless

Earl Moon <[log in to unmask]>

Fri, 23 Mar 2001 13:36:04 -0600

22 lines

New Thread

Soldermask geometry

Soldermask geometry

Hunter, Brian C <[log in to unmask]>

Tue, 6 Mar 2001 16:38:27 -0700

51 lines

Re: Soldermask geometry

Werner Engelmaier <[log in to unmask]>

Wed, 7 Mar 2001 08:00:45 EST

33 lines

Re: Soldermask geometry

Hunter, Brian C <[log in to unmask]>

Wed, 7 Mar 2001 09:38:42 -0700

44 lines

New Thread

Solvent for RTV738

Solvent for RTV738

<Peter George Duncan> <[log in to unmask]>

Wed, 21 Mar 2001 10:12:11 +0800

33 lines

Re: Solvent for RTV738

Phil Nutting <[log in to unmask]>

Wed, 21 Mar 2001 07:58:39 -0500

65 lines

Re: Solvent for RTV738

Campbell, William (wcampbel) <[log in to unmask]>

Wed, 21 Mar 2001 09:21:39 -0500

65 lines

Re: Solvent for RTV738

Phil Crepeau <[log in to unmask]>

Wed, 21 Mar 2001 07:56:56 -0800

58 lines

Re: Solvent for RTV738

Gary Camac <[log in to unmask]>

Wed, 21 Mar 2001 10:51:17 -0600

65 lines

Re: Solvent for RTV738

Bev Christian <[log in to unmask]>

Wed, 21 Mar 2001 12:54:10 -0500

121 lines

Re: Solvent for RTV738

Gerarden, Jeff <[log in to unmask]>

Thu, 22 Mar 2001 01:57:18 -0600

72 lines

Re: Solvent for RTV738

Bev Christian <[log in to unmask]>

Thu, 22 Mar 2001 08:16:00 -0500

101 lines

Re: Solvent for RTV738

Phil Nutting <[log in to unmask]>

Thu, 22 Mar 2001 08:31:50 -0500

133 lines

Re: Solvent for RTV738

<Peter George Duncan> <[log in to unmask]>

Fri, 23 Mar 2001 18:17:15 +0800

151 lines

New Thread

Solvent for RTV738 - But wait there is more!

Re: Solvent for RTV738 - But wait there is more!

Phil Nutting <[log in to unmask]>

Thu, 22 Mar 2001 08:34:32 -0500

129 lines

New Thread

Split planes and rs274x

Split planes and rs274x

Flick, Leo <[log in to unmask]>

Wed, 14 Mar 2001 02:59:47 -0500

190 lines

Re: Split planes and rs274x

Brock Hunter <[log in to unmask]>

Wed, 14 Mar 2001 08:15:45 -0500

46 lines

Re: Split planes and rs274x

Mark Hargreaves <[log in to unmask]>

Wed, 14 Mar 2001 08:29:18 -0500

59 lines

Re: Split planes and rs274x

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 14 Mar 2001 14:55:49 +0100

79 lines

Re: Split planes and rs274x

Roger M. Stoops <[log in to unmask]>

Wed, 14 Mar 2001 13:26:40 -0500

39 lines

Re: Split planes and rs274x

David Ricketts <[log in to unmask]>

Wed, 14 Mar 2001 13:20:22 -0800

301 lines

Re: Split planes and rs274x

Seth Goodman <[log in to unmask]>

Thu, 15 Mar 2001 12:47:57 -0600

33 lines

New Thread

Standard Sizes for Screen Printers

Standard Sizes for Screen Printers

Kasprzak, Bill (sys) USX <[log in to unmask]>

Wed, 7 Mar 2001 08:28:50 -0500

56 lines

Re: Standard Sizes for Screen Printers

Steve Collins <[log in to unmask]>

Wed, 7 Mar 2001 06:47:53 -0700

128 lines

Re: Standard Sizes for Screen Printers

Jowan Iven <[log in to unmask]>

Wed, 7 Mar 2001 16:40:46 +0100

103 lines

Re: Standard Sizes for Screen Printers

Larry J. Fisher <[log in to unmask]>

Wed, 7 Mar 2001 13:02:36 EST

79 lines

Re: Standard Sizes for Screen Printers

Ahne Oosterhof <[log in to unmask]>

Wed, 7 Mar 2001 10:26:50 -0800

110 lines

Re: Standard Sizes for Screen Printers

Stephen R. Gregory <[log in to unmask]>

Wed, 7 Mar 2001 20:38:20 EST

46 lines

Re: Standard Sizes for Screen Printers

[log in to unmask]

Thu, 8 Mar 2001 08:17:51 -0800

22 lines

New Thread

Standards

Standards

Rick Howieson <[log in to unmask]>

Mon, 5 Mar 2001 09:47:23 -0700

25 lines

Re: Standards

Hamilton, Richard CLE 4454 <[log in to unmask]>

Mon, 5 Mar 2001 10:19:09 -0700

69 lines

New Thread

Stndoffs

Stndoffs

Rougeux, Scott <[log in to unmask]>

Thu, 29 Mar 2001 11:03:33 -0600

31 lines

Re: Stndoffs

Phil Nutting <[log in to unmask]>

Thu, 29 Mar 2001 12:46:17 -0500

91 lines

Re: Stndoffs

Galang, Jerry <[log in to unmask]>

Thu, 29 Mar 2001 09:50:28 -0800

154 lines

New Thread

Stop Subscription

Stop Subscription

Anthony P. Arrigo <[log in to unmask]>

Fri, 23 Mar 2001 07:57:54 -0700

22 lines

New Thread

Substrate trace crack

Substrate trace crack

LI YUAN <[log in to unmask]>

Thu, 8 Mar 2001 14:57:17 -0700

27 lines

Re: Substrate trace crack

Earl Moon <[log in to unmask]>

Thu, 8 Mar 2001 16:16:07 -0600

23 lines

Re: Substrate trace crack

Zhang Tong Long <[log in to unmask]>

Fri, 9 Mar 2001 08:49:56 +0800

59 lines

Re: Substrate trace crack

LI YUAN <[log in to unmask]>

Fri, 9 Mar 2001 17:39:45 -0700

81 lines

Re: Substrate trace crack

Zhang Tong Long <[log in to unmask]>

Sat, 10 Mar 2001 14:11:55 +0800

104 lines

New Thread

Suggestion on laser soldering

Suggestion on laser soldering

lckang <[log in to unmask]>

Fri, 23 Mar 2001 13:25:45 +0800

65 lines

New Thread

SV: [TN] Optimum Baume Ferric Chloride For Stainless Steel

SV: [TN] Optimum Baume Ferric Chloride For Stainless Steel

Jan Thuesen <[log in to unmask]>

Mon, 5 Mar 2001 09:51:37 +0100

487 lines

New Thread

Taiwans Top PCB Makers

Taiwans Top PCB Makers

PCBA <[log in to unmask]>

Thu, 29 Mar 2001 09:43:52 +0800

24 lines

Re: Taiwans Top PCB Makers

<Peter George Duncan> <[log in to unmask]>

Thu, 29 Mar 2001 10:16:00 +0800

76 lines

Re: Taiwans Top PCB Makers

Stephen R. Gregory <[log in to unmask]>

Wed, 28 Mar 2001 21:28:16 EST

67 lines

Re: Taiwans Top PCB Makers

PCBA <[log in to unmask]>

Thu, 29 Mar 2001 12:08:39 +0800

84 lines

Re: Taiwans Top PCB Makers

sydney (黃杏林) <[log in to unmask]>

Thu, 29 Mar 2001 09:54:31 +0800

129 lines

New Thread

TechNet Digest - 23 Mar 2001 to 24 Mar 2001 (#2001-178)

Re: TechNet Digest - 23 Mar 2001 to 24 Mar 2001 (#2001-178)

fkurisu <[log in to unmask]>

Sun, 25 Mar 2001 17:15:40 -0800

157 lines

New Thread

TechNet Digest - 28 Mar 2001 - Special issue (#2001-186)

Re: TechNet Digest - 28 Mar 2001 - Special issue (#2001-186)

Wilber Heath <[log in to unmask]>

Thu, 29 Mar 2001 08:45:27 -0600

27 lines

New Thread

temperature delta on PWB

temperature delta on PWB

Guy Ramsey <[log in to unmask]>

Thu, 29 Mar 2001 07:33:12 -0500

30 lines

Re: temperature delta on PWB

<Peter George Duncan> <[log in to unmask]>

Fri, 30 Mar 2001 11:37:12 +0800

115 lines

New Thread

Tenting with dry film soldermask

Tenting with dry film soldermask

Ervin Weisz <[log in to unmask]>

Wed, 28 Mar 2001 12:50:47 -0800

50 lines

Re: Tenting with dry film soldermask

Ervin Weisz <[log in to unmask]>

Thu, 29 Mar 2001 07:48:44 -0800

106 lines

Re: Tenting with dry film soldermask

To My E-Mail Address <[log in to unmask]>

Thu, 29 Mar 2001 11:39:38 EST

49 lines

Re: Tenting with dry film soldermask

Ervin Weisz <[log in to unmask]>

Thu, 29 Mar 2001 11:38:01 -0800

124 lines

New Thread

Test tooling hole tolerance of +.002" / -000 on .125" ho le size

Re: Test tooling hole tolerance of +.002" / -000 on .125" ho le size

Thorup, John <[log in to unmask]>

Fri, 9 Mar 2001 12:16:40 -0800

54 lines

Re: Test tooling hole tolerance of +.002" / -000 on .125" ho le size

Hamilton, Richard CLE 4454 <[log in to unmask]>

Fri, 9 Mar 2001 13:11:35 -0700

62 lines

Re: Test tooling hole tolerance of +.002" / -000 on .125" ho le size

Thorup, John <[log in to unmask]>

Fri, 9 Mar 2001 12:48:04 -0800

84 lines

New Thread

Test tooling hole tolerance of +.002" / -000 on .125" hole size

Test tooling hole tolerance of +.002" / -000 on .125" hole size

Ken Patel <[log in to unmask]>

Fri, 9 Mar 2001 12:09:05 -0800

25 lines

Re: Test tooling hole tolerance of +.002" / -000 on .125" hole size

Chuck Brummer <[log in to unmask]>

Fri, 9 Mar 2001 12:43:45 -0800

48 lines

New Thread

Thermally conductive adhesive

Thermally conductive adhesive

Alain Savard <[log in to unmask]>

Wed, 21 Mar 2001 10:12:46 -0500

37 lines

Re: Thermally conductive adhesive

Marsico, James <[log in to unmask]>

Wed, 21 Mar 2001 10:40:25 -0500

79 lines

Re: Thermally conductive adhesive

Blomberg, Rainer (FL51) <[log in to unmask]>

Wed, 21 Mar 2001 11:02:56 -0500

71 lines

Re: Thermally conductive adhesive

Phil Crepeau <[log in to unmask]>

Wed, 21 Mar 2001 08:08:34 -0800

61 lines

Re: Thermally conductive adhesive

Douglas Pauls <[log in to unmask]>

Wed, 21 Mar 2001 10:23:27 -0600

25 lines

Re: Thermally conductive adhesive

Timothy Reeves <[log in to unmask]>

Wed, 21 Mar 2001 10:47:30 -0800

60 lines

New Thread

Time is Running Out to SAVE 10% on Expo Registration

Time is Running Out to SAVE 10% on Expo Registration

Christopher Jorgensen <[log in to unmask]>

Mon, 5 Mar 2001 12:13:57 -0600

175 lines

Re: Time is Running Out to SAVE 10% on Expo Registration

Dan Brandler <[log in to unmask]>

Mon, 5 Mar 2001 10:40:43 -0800

33 lines

New Thread

Tips wanted for my first multilayer board?

Tips wanted for my first multilayer board?

Matthew Lamkin <[log in to unmask]>

Mon, 12 Mar 2001 08:21:29 -0000

44 lines

Re: Tips wanted for my first multilayer board?

Geoff Layhe <[log in to unmask]>

Mon, 12 Mar 2001 09:45:34 -0000

83 lines

New Thread

twist and wrap issue

twist and wrap issue

IPC Forum <[log in to unmask]>

Fri, 16 Mar 2001 10:31:13 +0800

52 lines

Re: twist and wrap issue

Nancy Trumbull <[log in to unmask]>

Fri, 16 Mar 2001 06:41:31 -0500

37 lines

Re: twist and wrap issue

Ted Tontis <[log in to unmask]>

Fri, 16 Mar 2001 10:25:21 -0600

75 lines

Re: twist and wrap issue

IPC Forum <[log in to unmask]>

Sun, 18 Mar 2001 17:56:09 +0800

79 lines

Re: twist and wrap issue

Roland Jaquet <[log in to unmask]>

Sun, 18 Mar 2001 13:58:33 +0100

194 lines

New Thread

Upcoming IMAPS_SMTA Symposium

Upcoming IMAPS_SMTA Symposium

Lisa Anderson <[log in to unmask]>

Fri, 16 Mar 2001 06:22:57 -0800

45 lines

New Thread

v-groove (score and break) depanelization

v-groove (score and break) depanelization

Matt Sanders <[log in to unmask]>

Wed, 14 Mar 2001 19:11:18 -0800

48 lines

Re: v-groove (score and break) depanelization

Phil Nutting <[log in to unmask]>

Thu, 15 Mar 2001 08:54:31 -0500

91 lines

Re: v-groove (score and break) depanelization

Stephen R. Gregory <[log in to unmask]>

Thu, 15 Mar 2001 09:44:27 EST

75 lines

Re: v-groove (score and break) depanelization

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Thu, 15 Mar 2001 14:55:11 -0500

89 lines

New Thread

V-score Clearance

V-score Clearance

Jorge Rodriguez <[log in to unmask]>

Thu, 1 Mar 2001 14:27:52 -0700

42 lines

Re: V-score Clearance

John Parsons <[log in to unmask]>

Thu, 1 Mar 2001 15:05:25 -0800

60 lines

Re: V-score Clearance

Robert Lazzara <[log in to unmask]>

Fri, 2 Mar 2001 09:02:56 EST

99 lines

Re: V-score Clearance

mark simmons <[log in to unmask]>

Fri, 2 Mar 2001 08:43:52 -0800

138 lines

New Thread

V-score Clearance - oops

Re: V-score Clearance - oops

Robert Lazzara <[log in to unmask]>

Fri, 2 Mar 2001 09:07:47 EST

57 lines

New Thread

wafer question

wafer question

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 1 Mar 2001 15:58:48 +0100

23 lines

Re: wafer question

Hann Pang <[log in to unmask]>

Thu, 1 Mar 2001 10:15:50 -0600

65 lines

Re: wafer question

Creswick <[log in to unmask]>

Thu, 1 Mar 2001 15:25:39 -0500

61 lines

Re: wafer question

Creswick <[log in to unmask]>

Thu, 1 Mar 2001 15:33:14 -0500

96 lines

Re: wafer question

Creswick <[log in to unmask]>

Thu, 1 Mar 2001 20:03:10 -0500

163 lines

Re: wafer question

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 2 Mar 2001 08:36:37 +0100

85 lines

Re: wafer question

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 2 Mar 2001 08:59:41 +0100

88 lines

Re: wafer question

Creswick <[log in to unmask]>

Fri, 2 Mar 2001 10:08:49 -0500

118 lines

New Thread

Water Wash system justification

Water Wash system justification

Kathy Kuhlow <[log in to unmask]>

Fri, 30 Mar 2001 14:40:46 -0600

71 lines

Re: Water Wash system justification

Douglas Pauls <[log in to unmask]>

Fri, 30 Mar 2001 15:14:05 -0600

55 lines

Re: Water Wash system justification

Thomas Han <[log in to unmask]>

Fri, 30 Mar 2001 13:39:12 -0800

50 lines

Re: Water Wash system justification

Chuck Brummer <[log in to unmask]>

Fri, 30 Mar 2001 14:34:22 -0800

48 lines

Re: Water Wash system justification

Brian Ellis <[log in to unmask]>

Sat, 31 Mar 2001 10:50:19 +0300

89 lines

Re: Water Wash system justification

Mike Fenner <[log in to unmask]>

Sat, 31 Mar 2001 14:58:02 +0100

65 lines

Re: Water Wash system justification

Graham Naisbitt <[log in to unmask]>

Sat, 31 Mar 2001 22:47:39 +0100

84 lines

New Thread

Wave Solder

Wave Solder

Mark Charlton <[log in to unmask]>

Tue, 20 Mar 2001 11:23:50 -0500

63 lines

Re: Wave Solder

Christopher Murphy <[log in to unmask]>

Wed, 21 Mar 2001 17:05:17 +1200

84 lines

New Thread

Wave solder and earthquakes.

Re: Wave solder and earthquakes.

Brian Ellis <[log in to unmask]>

Thu, 1 Mar 2001 11:12:46 +0200

45 lines

New Thread

WHMA

WHMA

Rick Howieson <[log in to unmask]>

Mon, 5 Mar 2001 13:15:00 -0700

22 lines

Re: WHMA

Jack Crawford <[log in to unmask]>

Mon, 5 Mar 2001 14:56:20 -0600

100 lines

New Thread

Who makes long life press pads (as press buffer)?

Who makes long life press pads (as press buffer)?

PCBA <[log in to unmask]>

Tue, 27 Mar 2001 18:09:49 +0800

29 lines

Re: Who makes long life press pads (as press buffer)?

Robert Welch <[log in to unmask]>

Tue, 27 Mar 2001 15:21:03 -0500

26 lines

New Thread

Why I appreciate ya'll...

Why I appreciate ya'll...

Stephen R. Gregory <[log in to unmask]>

Tue, 20 Mar 2001 21:22:57 EST

59 lines

New Thread

x'[{>;rbg,=v|,d7Uo'xx_a'}zD+3LY

x'[{>;rbg,=v|,d7Uo'xx_a'}zD+3LY

Fernando Gmez <[log in to unmask]>

Mon, 26 Mar 2001 17:22:48 +0200

24 lines

New Thread

[TN] x'[{>;rbg,§â=vô|,d7«Uo'xxù_a'}zD+3LY

RE: [TN] x'[{>;rbg,§â=vô|,d7«Uo'xxù_a'}zD+3LY

Gary McCauley <[log in to unmask]>

Mon, 26 Mar 2001 09:43:43 -0600

70 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager