LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


December 2000


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

1.00mm pitch 196 pin PBGA land pattern (1 message)
7628 glass fabric in Korea? (3 messages)
<No subject> (1 message)
Accoustic testing (3 messages)
Adhesive design rules for SMD packages. (1 message)
Advice about pull manufacturing implementation (6 messages)
Antw: [TN] Failure analysis of cap: Type analysis and an y lab that cando the job in San Jose Bay Area (2 messages)
Antw: [TN] Failure analysis of cap: Type analysis and any lab that cando the job in San Jose Bay Area (1 message)
Antw: [TN] Solder Failure During SMT/Wave Solder (2 messages)
Assembly DPMO Benchmarks or Targets (4 messages)
Bare Edges - Preplated Contacts (3 messages)
Bellcore Specification (1 message)
BGA and QFP inspection service (1 message)
BGA Replacement (3 messages)
BRAZIL Contract Manufacturing survey (1 message)
Calculation of DPMO and Manufacturing Indicesfor Printed Board Assem... (1 message)
Calculation of DPMO and Manufacturing Indicesfor Printed Board Assemblies IPC-7912 (2 messages)
Cap leakage v/s pad size (2 messages)
Component Category (3 messages)
Conformal Coat Masking (7 messages)
Conformal Coating - Design Guidelines? (2 messages)
Conformal Coating and Aqueous Cleaning (7 messages)
Conformal Coating... (9 messages)
Controlled Impedance Question (4 messages)
Copper contamination is wave solder (14 messages)
Dave Robertson is ill (1 message)
DEK-265 10" color monitor (4 messages)
DEK-265 Monitor Repair... (3 messages)
Design for reliable pbga joint (2 messages)
Different Wave Solders?? (1 message)
DOE for dry film developer (3 messages)
drilling problems (1 message)
Dry film lamination - lifted resist (8 messages)
Dry Nitrogen Storage Cabinets (6 messages)
ESD/ISO9000 (4 messages)
Evaluation Time ... (1 message)
Extracting messages from archive (3 messages)
Fab callouts for Ceramic substate and Pd/Ag conductors (2 messages)
Failure Analysis courses (3 messages)
Failure analysis of cap: Type analysis and any lab that can do th e job in San Jose Bay Area (3 messages)
Failure analysis of cap: Type analysis and any lab that can do the job in San Jose Bay Area (1 message)
Failure analysis of cap: Type analysis and any lab thatcando the job in San Jose Bay Area (1 message)
FIM Positional Tolerance (1 message)
Flip chip solder bump cracks (1 message)
formflex tooling (5 messages)
Free access to Soldering and Surface Mount Technology Journal (1 message)
Freon replacement for vapour phase (6 messages)
Fusible links (3 messages)
FW: Conformal Coating and Aqueous Cleaning (2 messages)
FW: Need a good Sr. PCB Designer (1 message)
FW: [TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO (1 message)
FW: [TN] Solder Failure During SMT/Wave Solder (1 message)
Fwd:HAPPY CHRISTMAS (1 message)
Gold crack after immersion gold (1 message)
GOLD PLATING DEFECT (6 messages)
Grad Schools with PCB Research (1 message)
Happy Holidays (1 message)
Happy New Year. (1 message)
Heat dissipation (2 messages)
Heller table top ovens (3 messages)
HI-Pot Test (2 messages)
High temp gloves and support for mini-wave (2 messages)
immersion silver and tin qual (6 messages)
impedance testing... the question (3 messages)
Inquiry on IPC Standard Regarding Hole Measurement and Its Accept ab... (1 message)
Inquiry on IPC Standard Regarding Hole Measurement and Its Accept ability (1 message)
Ionic contamination Limit (6 messages)
IPC NEWS RELEASE- TECHNICAL STANDARDS FORUMS OPEN TO ALLATTENDEES AT IPC PRINTED CIRCUITS EXPO 2001 (1 message)
IPC-A-610 Barrel Vertical Fill Interpretation (1 message)
IPC-MF-150 (3 messages)
Land Bond Strength and Peel Strength-Help (3 messages)
land pattern for SOD323 (2 messages)
languages (2 messages)
Lead protrusion (3 messages)
Legal question (4 messages)
masking for conformal coating (8 messages)
Merry Christmas... (2 messages)
Microsoft Access Developer Needed (1 message)
Nancy Reynolds/MKT/HQ/KEMET/US is out of the office. (1 message)
need OSP vendor (1 message)
Nitrogen and its uses. (help) (3 messages)
Nomenclature with Immersion Tin/Silver (6 messages)
Oops... Mixed Chemistry fluxes (4 messages)
OSP coating (1 message)
OSP PROCESS (3 messages)
OSP PROCESS/plugging of holes (3 messages)
PCB Design Quiz (no technical content) (3 messages)
PCI mechanical spec. (3 messages)
placement machine characterization (1 message)
Pls sign off if you're on a holiday break... (1 message)
Power PCB Design Rules Guidlines (1 message)
Precision Spray Valve (1 message)
PRESIÓN DE VACÍO (1 message)
pth plating repair (3 messages)
pulse plating of copper (3 messages)
Quality Tracking Software (1 message)
Query: industry standard for pretreating PWB/PCB before underfilling? (5 messages)
Re Soldering Iron Temperatures (1 message)
Re-sealing Moisture Sensitive Components (5 messages)
RE: [TN] PRESIÓN DE VACÍO (2 messages)
Re: [TN] Re: [TN] PRESIÓN DE VACÍO (1 message)
Re: [TN] Re: [TN] RE: [TN]RE: [TN] PRESIÓN DE VACÍO (1 message)
Recommendations on Conveyor Systems (7 messages)
Rejected Posting Notices (1 message)
Rejected posting to [log in to unmask] (5 messages)
Reliability tests for BGA assemblies (2 messages)
Repair of fiducial fill material (11 messages)
Rogers BendFlex Substitute (3 messages)
Scratched double treat material (3 messages)
seasons greetings (1 message)
SET Technet NOMAIL (1 message)
Small Nitrogen Reflow Oven (4 messages)
Small wave soldering machines with nitrogen (2 messages)
SNEC Meeting (1 message)
Solder Baskets (4 messages)
Solder Failure During SMT/Wave Solder (5 messages)
Solder Failure/Thanks (2 messages)
Solderability Testing (3 messages)
Soldering iron temperature (8 messages)
Soletec 6622C Wave Solder Machine (2 messages)
Soltec 6622C Wave Solder Machine (1 message)
Someone sent me a virus..but I'm not infected. (1 message)
Specification Comparison (1 message)
squeegee blade assembly storage (4 messages)
Strange cap Layout (8 messages)
TAPE & REEL POCKET SIZES (3 messages)
tape test on the IMG surface (3 messages)
Test (2 messages)
Testing Solderability (2 messages)
Thin-film specialist (3 messages)
Tin Plate Leaching... (7 messages)
Track width to pad width. (1 message)
unsubscribe (1 message)
Vacuum packing for HASL surface finish (1 message)
WARP (3 messages)
warped pcb control (1 message)
Warranty (1 message)
Wave Solder 1210 Chip Caps (3 messages)
wedge void (3 messages)
What is the going price for ceramic fiber optic ferrules? (2 messages)
What PCB Software can do stencil design close to IPC-752 5? (1 message)
What PCB Software can do stencil design close to IPC-7525? (1 message)
White Spots (3 messages)
[TN] Re: [TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO (2 messages)
[TN] PRESIÓN DE VACÍO (5 messages)
[TN] RE: [TN] PRESIÓN DE VACÍO (4 messages)
[TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO (1 message)
[TN]Re: [TN] Re: [TN] PRESIÓN DE VACÍO (1 message)
[TN} Quality/Yield Tracking Software. (1 message)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

New Thread

1.00mm pitch 196 pin PBGA land pattern

1.00mm pitch 196 pin PBGA land pattern

Flick, Leo <[log in to unmask]>

Mon, 18 Dec 2000 09:12:48 -0500

65 lines

New Thread

7628 glass fabric in Korea?

7628 glass fabric in Korea?

PCBA <[log in to unmask]>

Thu, 21 Dec 2000 18:26:00 +0800

27 lines

Re: 7628 glass fabric in Korea?

Timothy Reeves <[log in to unmask]>

Thu, 21 Dec 2000 12:33:39 -0800

42 lines

Re: 7628 glass fabric in Korea?

A5A40544AEA5 <[log in to unmask]>

Fri, 22 Dec 2000 09:12:46 +0900

77 lines

New Thread

<No subject>

<No subject>

Dennis Manowski <[log in to unmask]>

Tue, 19 Dec 2000 06:29:17 -0800

37 lines

New Thread

Accoustic testing

Accoustic testing

[log in to unmask]

Fri, 15 Dec 2000 08:59:24 EST

28 lines

Re: Accoustic testing

McMonagle, Mike <[log in to unmask]>

Fri, 15 Dec 2000 08:24:45 -0600

69 lines

Re: Accoustic testing

Pelkey, Glenn <[log in to unmask]>

Fri, 15 Dec 2000 08:07:15 -0800

47 lines

New Thread

Adhesive design rules for SMD packages.

Adhesive design rules for SMD packages.

Marius Geurts <[log in to unmask]>

Fri, 8 Dec 2000 13:59:12 +0100

43 lines

New Thread

Advice about pull manufacturing implementation

Advice about pull manufacturing implementation

Earl Moon <[log in to unmask]>

Tue, 5 Dec 2000 05:52:55 -0600

45 lines

Re: Advice about pull manufacturing implementation

Ken Bloomquist <[log in to unmask]>

Tue, 5 Dec 2000 07:31:07 -0800

26 lines

Re: Advice about pull manufacturing implementation

Hans Hinners <[log in to unmask]>

Tue, 5 Dec 2000 08:37:28 -0800

96 lines

Re: Advice about pull manufacturing implementation

Lee Whiteman <[log in to unmask]>

Tue, 5 Dec 2000 11:50:19 -0500

102 lines

Re: Advice about pull manufacturing implementation

Earl Moon <[log in to unmask]>

Tue, 5 Dec 2000 17:05:34 -0600

31 lines

Advice about pull manufacturing implementation

Andy Magee <[log in to unmask]>

Wed, 6 Dec 2000 07:06:57 -0500

87 lines

New Thread

Antw: [TN] Failure analysis of cap: Type analysis and an y lab that cando the job in San Jose Bay Area

Re: Antw: [TN] Failure analysis of cap: Type analysis and an y lab that cando the job in San Jose Bay Area

Louis, Edwin @ CSE <[log in to unmask]>

Wed, 13 Dec 2000 08:43:38 -0500

86 lines

Re: Antw: [TN] Failure analysis of cap: Type analysis and an y lab that cando the job in San Jose Bay Area

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 13 Dec 2000 16:04:14 +0100

99 lines

New Thread

Antw: [TN] Failure analysis of cap: Type analysis and any lab that cando the job in San Jose Bay Area

Antw: [TN] Failure analysis of cap: Type analysis and any lab that cando the job in San Jose Bay Area

Guenter Grossmann <[log in to unmask]>

Wed, 13 Dec 2000 10:43:54 +0100

63 lines

New Thread

Antw: [TN] Solder Failure During SMT/Wave Solder

Antw: [TN] Solder Failure During SMT/Wave Solder

Guenter Grossmann <[log in to unmask]>

Fri, 15 Dec 2000 09:49:41 +0100

54 lines

Re: Antw: [TN] Solder Failure During SMT/Wave Solder

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Fri, 15 Dec 2000 08:29:46 -0500

108 lines

New Thread

Assembly DPMO Benchmarks or Targets

Assembly DPMO Benchmarks or Targets

Mark Orlowski <[log in to unmask]>

Tue, 5 Dec 2000 12:44:37 -0600

33 lines

Re: Assembly DPMO Benchmarks or Targets

Jowan Iven <[log in to unmask]>

Wed, 6 Dec 2000 08:53:34 +0100

74 lines

Re: Assembly DPMO Benchmarks or Targets

Mark Orlowski <[log in to unmask]>

Wed, 6 Dec 2000 09:29:34 -0600

110 lines

Re: Assembly DPMO Benchmarks or Targets

Jowan Iven <[log in to unmask]>

Wed, 6 Dec 2000 17:20:59 +0100

151 lines

New Thread

Bare Edges - Preplated Contacts

Bare Edges - Preplated Contacts

Dennis Manowski <[log in to unmask]>

Tue, 19 Dec 2000 06:52:02 -0800

41 lines

Re: Bare Edges - Preplated Contacts

Nancy Trumbull <[log in to unmask]>

Tue, 19 Dec 2000 11:58:51 -0500

74 lines

Re: Bare Edges - Preplated Contacts

Roberts Jon <[log in to unmask]>

Wed, 20 Dec 2000 07:25:13 -0600

84 lines

New Thread

Bellcore Specification

Re: Bellcore Specification

Yuen, Mike <[log in to unmask]>

Fri, 1 Dec 2000 11:08:28 -0600

42 lines

New Thread

BGA and QFP inspection service

BGA and QFP inspection service

Ed Popielarski <[log in to unmask]>

Wed, 13 Dec 2000 04:44:09 -0800

84 lines

New Thread

BGA Replacement

BGA Replacement

Thomas Han <[log in to unmask]>

Tue, 19 Dec 2000 11:03:54 -0800

26 lines

Re: BGA Replacement

Stephen R. Gregory <[log in to unmask]>

Tue, 19 Dec 2000 19:16:26 EST

49 lines

Re: BGA Replacement

Jeff Ferry <[log in to unmask]>

Tue, 19 Dec 2000 19:51:43 -0600

45 lines

New Thread

BRAZIL Contract Manufacturing survey

BRAZIL Contract Manufacturing survey

Ofer Rachman - Israel <[log in to unmask]>

Mon, 4 Dec 2000 00:52:25 +0200

26 lines

New Thread

Calculation of DPMO and Manufacturing Indicesfor Printed Board Assem...

Re: Calculation of DPMO and Manufacturing Indicesfor Printed Board Assem...

Mike Sewell <[log in to unmask]>

Fri, 1 Dec 2000 12:29:32 EST

47 lines

New Thread

Calculation of DPMO and Manufacturing Indicesfor Printed Board Assemblies IPC-7912

Re: Calculation of DPMO and Manufacturing Indicesfor Printed Board Assemblies IPC-7912

Mark Orlowski <[log in to unmask]>

Fri, 1 Dec 2000 10:58:01 -0600

25 lines

Re: Calculation of DPMO and Manufacturing Indicesfor Printed Board Assemblies IPC-7912

Ernie Crump <[log in to unmask]>

Fri, 1 Dec 2000 13:06:42 -0500

82 lines

New Thread

Cap leakage v/s pad size

Cap leakage v/s pad size

Ken Patel <[log in to unmask]>

Mon, 11 Dec 2000 18:57:45 -0800

25 lines

Re: Cap leakage v/s pad size

John Brewer <[log in to unmask]>

Tue, 12 Dec 2000 08:28:05 -0500

26 lines

New Thread

Component Category

Component Category

Ruby Hazen <[log in to unmask]>

Thu, 14 Dec 2000 14:57:19 -0800

33 lines

Re: Component Category

Kiiski Jarmo <[log in to unmask]>

Fri, 15 Dec 2000 15:14:24 +0200

70 lines

Re: Component Category

Craig Hillman <[log in to unmask]>

Fri, 15 Dec 2000 08:46:04 -0500

67 lines

New Thread

Conformal Coat Masking

Conformal Coat Masking

Kane, Joseph <[log in to unmask]>

Fri, 1 Dec 2000 09:43:22 -0500

33 lines

Re: Conformal Coat Masking

Phil Nutting <[log in to unmask]>

Fri, 1 Dec 2000 10:21:45 -0500

92 lines

Re: Conformal Coat Masking

Ernie Crump <[log in to unmask]>

Fri, 1 Dec 2000 10:37:40 -0500

84 lines

Re: Conformal Coat Masking

Cash, Alan <[log in to unmask]>

Fri, 1 Dec 2000 08:15:40 -0800

56 lines

Re: Conformal Coat Masking

Mike Sewell <[log in to unmask]>

Fri, 1 Dec 2000 11:44:26 EST

59 lines

Re: Conformal Coat Masking

Graham Naisbitt <[log in to unmask]>

Fri, 1 Dec 2000 16:47:07 -0000

76 lines

Re: Conformal Coat Masking

Thomas Han <[log in to unmask]>

Fri, 1 Dec 2000 10:50:15 -0800

96 lines

New Thread

Conformal Coating - Design Guidelines?

Conformal Coating - Design Guidelines?

Matthew Lamkin <[log in to unmask]>

Mon, 18 Dec 2000 13:23:11 -0000

25 lines

Re: Conformal Coating - Design Guidelines?

Graham Naisbitt <[log in to unmask]>

Mon, 18 Dec 2000 16:11:28 -0000

78 lines

New Thread

Conformal Coating and Aqueous Cleaning

Conformal Coating and Aqueous Cleaning

bbarr <[log in to unmask]>

Thu, 21 Dec 2000 12:21:48 -0500

40 lines

Re: Conformal Coating and Aqueous Cleaning

Phil Crepeau <[log in to unmask]>

Thu, 21 Dec 2000 10:25:59 -0800

63 lines

Re: Conformal Coating and Aqueous Cleaning

Lee Whiteman <[log in to unmask]>

Thu, 21 Dec 2000 14:35:27 -0500

102 lines

Re: Conformal Coating and Aqueous Cleaning

Brian Ellis <[log in to unmask]>

Fri, 22 Dec 2000 14:52:44 +0200

61 lines

Re: Conformal Coating and Aqueous Cleaning

Brian Ellis <[log in to unmask]>

Fri, 22 Dec 2000 14:55:34 +0200

121 lines

Re: Conformal Coating and Aqueous Cleaning

Graham Naisbitt <[log in to unmask]>

Fri, 22 Dec 2000 14:01:20 -0000

83 lines

Re: Conformal Coating and Aqueous Cleaning

Hans Hinners <[log in to unmask]>

Tue, 26 Dec 2000 20:24:23 -0800

87 lines

New Thread

Conformal Coating...

Conformal Coating...

Ken Patel <[log in to unmask]>

Fri, 15 Dec 2000 17:28:58 -0800

25 lines

Re: Conformal Coating...

Brian Ellis <[log in to unmask]>

Sat, 16 Dec 2000 09:42:09 +0200

69 lines

Re: Conformal Coating...

Graham Naisbitt <[log in to unmask]>

Sun, 17 Dec 2000 00:37:22 -0000

86 lines

Re: Conformal Coating...

Brian Ellis <[log in to unmask]>

Sun, 17 Dec 2000 10:52:37 +0200

189 lines

Re: Conformal Coating...

McMonagle, Mike <[log in to unmask]>

Mon, 18 Dec 2000 08:18:28 -0600

66 lines

Re: Conformal Coating...

Fred Lovingier <[log in to unmask]>

Mon, 18 Dec 2000 07:16:38 -0800

59 lines

Re: Conformal Coating...

Brian Ellis <[log in to unmask]>

Mon, 18 Dec 2000 17:46:47 +0200

72 lines

Re: Conformal Coating...

Graham Naisbitt <[log in to unmask]>

Mon, 18 Dec 2000 16:01:01 -0000

143 lines

Re: Conformal Coating...

Graham Naisbitt <[log in to unmask]>

Mon, 18 Dec 2000 16:01:04 -0000

275 lines

New Thread

Controlled Impedance Question

Controlled Impedance Question

Doug Jeffery <[log in to unmask]>

Fri, 8 Dec 2000 12:02:40 -0600

30 lines

Re: Controlled Impedance Question

Earl Moon <[log in to unmask]>

Sat, 9 Dec 2000 07:01:58 -0600

36 lines

Re: Controlled Impedance Question

Olson, Jack <[log in to unmask]>

Mon, 11 Dec 2000 11:22:43 -0600

49 lines

Re: Controlled Impedance Question

Earl Moon <[log in to unmask]>

Mon, 11 Dec 2000 12:37:11 -0600

42 lines

New Thread

Copper contamination is wave solder

Copper contamination is wave solder

Lou Hart <[log in to unmask]>

Wed, 6 Dec 2000 15:03:13 -0500

35 lines

Re: Copper contamination is wave solder

Bev Christian <[log in to unmask]>

Wed, 6 Dec 2000 15:33:19 -0500

86 lines

Re: Copper contamination is wave solder

Ernie Crump <[log in to unmask]>

Wed, 6 Dec 2000 15:57:50 -0500

30 lines

Re: Copper contamination is wave solder

Alain Savard <[log in to unmask]>

Thu, 7 Dec 2000 07:25:39 -0500

77 lines

Re: Copper contamination is wave solder

Roberts Jon <[log in to unmask]>

Thu, 7 Dec 2000 07:57:29 -0600

64 lines

Re: Copper contamination is wave solder

Ryan Grant <[log in to unmask]>

Thu, 7 Dec 2000 14:04:15 -0700

64 lines

Re: Copper contamination is wave solder

Lou Hart <[log in to unmask]>

Fri, 8 Dec 2000 09:17:37 -0500

80 lines

Re: Copper contamination is wave solder

Ryan Grant <[log in to unmask]>

Fri, 8 Dec 2000 08:00:41 -0700

134 lines

Re: Copper contamination is wave solder

Guy Ramsey <[log in to unmask]>

Fri, 8 Dec 2000 10:52:17 -0500

169 lines

Re: Copper contamination is wave solder

Ryan Grant <[log in to unmask]>

Fri, 8 Dec 2000 12:50:40 -0700

210 lines

Re: Copper contamination is wave solder

Campbell, William (wcampbel) <[log in to unmask]>

Fri, 8 Dec 2000 15:08:09 -0500

238 lines

Re: Copper contamination is wave solder

Wenger, George M (George) <[log in to unmask]>

Sun, 17 Dec 2000 15:40:50 -0500

136 lines

Re: Copper contamination is wave solder

Wenger, George M (George) <[log in to unmask]>

Sun, 17 Dec 2000 16:03:04 -0500

170 lines

Re: Copper contamination is wave solder

Robert Lazzara <[log in to unmask]>

Mon, 18 Dec 2000 09:24:54 EST

54 lines

New Thread

Dave Robertson is ill

Dave Robertson is ill

Jack Crawford <[log in to unmask]>

Tue, 12 Dec 2000 14:05:41 -0600

77 lines

New Thread

DEK-265 10" color monitor

DEK-265 10" color monitor

Stephen R. Gregory <[log in to unmask]>

Tue, 5 Dec 2000 10:15:19 EST

36 lines

Re: DEK-265 10" color monitor

Gary Camac <[log in to unmask]>

Tue, 5 Dec 2000 14:10:26 -0600

93 lines

Re: DEK-265 10" color monitor

Stephen R. Gregory <[log in to unmask]>

Tue, 5 Dec 2000 16:05:25 EST

58 lines

Re: DEK-265 10" color monitor

Kasprzak, Bill (esd) USX <[log in to unmask]>

Wed, 6 Dec 2000 07:53:35 -0500

75 lines

New Thread

DEK-265 Monitor Repair...

DEK-265 Monitor Repair...

Stephen R. Gregory <[log in to unmask]>

Mon, 4 Dec 2000 16:46:33 EST

28 lines

Re: DEK-265 Monitor Repair...

Earl Moon <[log in to unmask]>

Mon, 4 Dec 2000 16:01:34 -0600

26 lines

Re: DEK-265 Monitor Repair...

Stephen R. Gregory <[log in to unmask]>

Mon, 4 Dec 2000 17:32:45 EST

42 lines

New Thread

Design for reliable pbga joint

Design for reliable pbga joint

Weiner Mickey <[log in to unmask]>

Wed, 20 Dec 2000 08:51:54 +0200

126 lines

Re: Design for reliable pbga joint

Werner Engelmaier <[log in to unmask]>

Wed, 20 Dec 2000 08:34:36 EST

42 lines

New Thread

Different Wave Solders??

Different Wave Solders??

Hann Pang <[log in to unmask]>

Wed, 6 Dec 2000 16:51:05 -0600

25 lines

New Thread

DOE for dry film developer

DOE for dry film developer

Franklin D Asbell <[log in to unmask]>

Fri, 29 Dec 2000 11:20:06 -0600

32 lines

Re: DOE for dry film developer

sean clinton <[log in to unmask]>

Fri, 29 Dec 2000 09:49:21 -0600

83 lines

Re: DOE for dry film developer

<Rudy Sedlak> <[log in to unmask]>

Fri, 29 Dec 2000 17:21:42 EST

38 lines

New Thread

drilling problems

Re: drilling problems

Dennis Fritz <[log in to unmask]>

Fri, 1 Dec 2000 17:38:05 EST

39 lines

New Thread

Dry film lamination - lifted resist

Dry film lamination - lifted resist

Franklin D Asbell <[log in to unmask]>

Tue, 26 Dec 2000 14:33:35 -0600

47 lines

Re: Dry film lamination - lifted resist

Earl Moon <[log in to unmask]>

Tue, 26 Dec 2000 15:06:51 -0600

33 lines

Re: Dry film lamination - lifted resist

<Rudy Sedlak> <[log in to unmask]>

Tue, 26 Dec 2000 16:35:01 EST

34 lines

Re: Dry film lamination - lifted resist

Franklin D Asbell <[log in to unmask]>

Tue, 26 Dec 2000 15:41:46 -0600

44 lines

Re: Dry film lamination - lifted resist

Brian Ellis <[log in to unmask]>

Wed, 27 Dec 2000 12:01:30 +0200

66 lines

Re: Dry film lamination - lifted resist

sean clinton <[log in to unmask]>

Wed, 27 Dec 2000 07:23:18 -0600

93 lines

Re: Dry film lamination - lifted resist

Franklin D Asbell <[log in to unmask]>

Wed, 27 Dec 2000 10:05:21 -0600

37 lines

Re: Dry film lamination - lifted resist

sean clinton <[log in to unmask]>

Wed, 27 Dec 2000 10:47:57 -0600

69 lines

New Thread

Dry Nitrogen Storage Cabinets

Dry Nitrogen Storage Cabinets

John Maxwell <[log in to unmask]>

Tue, 5 Dec 2000 07:21:03 -0700

28 lines

Re: Dry Nitrogen Storage Cabinets

Lee Whiteman <[log in to unmask]>

Tue, 5 Dec 2000 13:54:54 -0500

66 lines

Re: Dry Nitrogen Storage Cabinets

bbarr <[log in to unmask]>

Tue, 5 Dec 2000 16:42:34 -0500

66 lines

Re: Dry Nitrogen Storage Cabinets

Brad L. Matthies <[log in to unmask]>

Tue, 5 Dec 2000 16:41:51 -0600

76 lines

Re: Dry Nitrogen Storage Cabinets

Phil Nutting <[log in to unmask]>

Wed, 6 Dec 2000 08:22:38 -0500

117 lines

Re: Dry Nitrogen Storage Cabinets

Bev Christian <[log in to unmask]>

Wed, 6 Dec 2000 13:26:23 -0500

162 lines

New Thread

ESD/ISO9000

ESD/ISO9000

Bill Davis <[log in to unmask]>

Tue, 5 Dec 2000 15:05:58 EST

25 lines

Re: ESD/ISO9000

Guy Ramsey <[log in to unmask]>

Tue, 5 Dec 2000 16:05:38 -0500

59 lines

Re: ESD/ISO9000

Dieselberg, Ron <[log in to unmask]>

Wed, 6 Dec 2000 06:13:41 -0500

54 lines

Re: ESD/ISO9000

Cash, Alan <[log in to unmask]>

Wed, 6 Dec 2000 07:14:12 -0800

85 lines

New Thread

Evaluation Time ...

Evaluation Time ...

Doug <[log in to unmask]>

Sat, 16 Dec 2000 09:12:48 -0800

44 lines

New Thread

Extracting messages from archive

Extracting messages from archive

Yehuda Weisz <[log in to unmask]>

Mon, 19 Jan 2099 08:07:58 +0200

84 lines

Re: Extracting messages from archive

Campbell, William (wcampbel) <[log in to unmask]>

Wed, 20 Dec 2000 09:39:59 -0500

46 lines

Re: Extracting messages from archive

Gabriela Bogdan <[log in to unmask]>

Thu, 21 Dec 2000 10:07:41 +0200

51 lines

New Thread

Fab callouts for Ceramic substate and Pd/Ag conductors

Fab callouts for Ceramic substate and Pd/Ag conductors

Alcorn, Brent <[log in to unmask]>

Thu, 7 Dec 2000 09:33:50 -0500

30 lines

Fab callouts for Ceramic substate and Pd/Ag conductors

Creswick <[log in to unmask]>

Thu, 7 Dec 2000 21:29:46 -0500

63 lines

New Thread

Failure Analysis courses

Failure Analysis courses

Becerra Alejandro <[log in to unmask]>

Tue, 5 Dec 2000 14:22:47 -0500

33 lines

Re: Failure Analysis courses

michael alderete <[log in to unmask]>

Thu, 7 Dec 2000 12:48:03 -0800

65 lines

Failure analysis courses

John Brewer <[log in to unmask]>

Fri, 8 Dec 2000 08:48:57 -0500

28 lines

New Thread

Failure analysis of cap: Type analysis and any lab that can do th e job in San Jose Bay Area

Failure analysis of cap: Type analysis and any lab that can do th e job in San Jose Bay Area

Ken Patel <[log in to unmask]>

Tue, 12 Dec 2000 11:06:15 -0800

27 lines

Re: Failure analysis of cap: Type analysis and any lab that can do th e job in San Jose Bay Area

Rick Howieson <[log in to unmask]>

Tue, 12 Dec 2000 12:15:25 -0700

53 lines

Re: Failure analysis of cap: Type analysis and any lab that can do th e job in San Jose Bay Area

Becerra Alejandro <[log in to unmask]>

Tue, 12 Dec 2000 14:13:53 -0500

60 lines

New Thread

Failure analysis of cap: Type analysis and any lab that can do the job in San Jose Bay Area

Re: Failure analysis of cap: Type analysis and any lab that can do the job in San Jose Bay Area

Ken Patel <[log in to unmask]>

Tue, 12 Dec 2000 11:22:05 -0800

66 lines

New Thread

Failure analysis of cap: Type analysis and any lab thatcando the job in San Jose Bay Area

Re: Failure analysis of cap: Type analysis and any lab thatcando the job in San Jose Bay Area

Gabriela Bogdan <[log in to unmask]>

Tue, 12 Dec 2000 22:38:35 +0200

85 lines

New Thread

FIM Positional Tolerance

FIM Positional Tolerance

Mcmaster, Michael <[log in to unmask]>

Thu, 28 Dec 2000 12:32:11 -0800

29 lines

New Thread

Flip chip solder bump cracks

Flip chip solder bump cracks

LI YUAN <[log in to unmask]>

Thu, 14 Dec 2000 11:44:36 -0700

47 lines

New Thread

formflex tooling

Re: formflex tooling

Horaud, Walter <[log in to unmask]>

Mon, 11 Dec 2000 10:08:44 +0100

61 lines

Re: formflex tooling

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 11 Dec 2000 09:29:04 -0500

48 lines

Re: formflex tooling

Earl Moon <[log in to unmask]>

Mon, 11 Dec 2000 12:41:54 -0600

26 lines

Re: formflex tooling

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 11 Dec 2000 15:44:28 -0500

74 lines

Re: formflex tooling

Earl Moon <[log in to unmask]>

Mon, 11 Dec 2000 16:15:22 -0600

40 lines

New Thread

Free access to Soldering and Surface Mount Technology Journal

Free access to Soldering and Surface Mount Technology Journal

David Whalley <[log in to unmask]>

Mon, 18 Dec 2000 09:48:59 +0000

44 lines

New Thread

Freon replacement for vapour phase

Freon replacement for vapour phase

David Whalley <[log in to unmask]>

Wed, 20 Dec 2000 10:50:05 +0000

42 lines

Re: Freon replacement for vapour phase

Lee Whiteman <[log in to unmask]>

Wed, 20 Dec 2000 09:47:55 -0500

97 lines

Re: Freon replacement for vapour phase

Brian Ellis <[log in to unmask]>

Wed, 20 Dec 2000 18:42:12 +0200

69 lines

Re: Freon replacement for vapour phase

Guy Ramsey <[log in to unmask]>

Wed, 20 Dec 2000 12:08:53 -0500

110 lines

Re: Freon replacement for vapour phase

May William D (Dean) CNIN <[log in to unmask]>

Wed, 20 Dec 2000 15:30:13 -0500

31 lines

Re: Freon replacement for vapour phase

David Fish <[log in to unmask]>

Wed, 20 Dec 2000 21:46:58 -0800

60 lines

New Thread

Fusible links

Fusible links

Hipp, Dave HS-SNS <[log in to unmask]>

Fri, 8 Dec 2000 07:34:52 -0500

37 lines

Re: Fusible links

Brian Ellis <[log in to unmask]>

Fri, 8 Dec 2000 16:06:49 +0200

70 lines

Re: Fusible links

Roger M. Stoops <[log in to unmask]>

Fri, 8 Dec 2000 13:13:55 -0500

88 lines

New Thread

FW: Conformal Coating and Aqueous Cleaning

FW: Conformal Coating and Aqueous Cleaning

Ketan Bhatt <[log in to unmask]>

Fri, 22 Dec 2000 12:11:23 +0530

138 lines

Re: FW: Conformal Coating and Aqueous Cleaning

Brian Ellis <[log in to unmask]>

Fri, 22 Dec 2000 14:59:44 +0200

144 lines

New Thread

FW: Need a good Sr. PCB Designer

FW: Need a good Sr. PCB Designer

Brooks,Bill <[log in to unmask]>

Wed, 6 Dec 2000 14:44:11 -0800

80 lines

New Thread

FW: [TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO

FW: [TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO

Goldman, Patricia J. <[log in to unmask]>

Fri, 22 Dec 2000 13:58:24 -0500

161 lines

New Thread

FW: [TN] Solder Failure During SMT/Wave Solder

FW: [TN] Solder Failure During SMT/Wave Solder

Barry Gallegos <[log in to unmask]>

Fri, 15 Dec 2000 07:23:40 -0700

172 lines

New Thread

Fwd:HAPPY CHRISTMAS

Fwd:HAPPY CHRISTMAS

<[log in to unmask]>

Sat, 16 Dec 2000 10:31:40 -0800

29 lines

New Thread

Gold crack after immersion gold

Gold crack after immersion gold

George Chu <[log in to unmask]>

Thu, 21 Dec 2000 08:01:21 +0800

71 lines

New Thread

GOLD PLATING DEFECT

GOLD PLATING DEFECT

Charles E. McMahon <[log in to unmask]>

Thu, 7 Dec 2000 20:52:51 -0500

45 lines

Re: GOLD PLATING DEFECT

Robert Lazzara <[log in to unmask]>

Fri, 8 Dec 2000 08:47:36 EST

44 lines

Re: GOLD PLATING DEFECT

Charles E. McMahon <[log in to unmask]>

Fri, 8 Dec 2000 09:57:05 -0500

71 lines

Re: GOLD PLATING DEFECT

<Rudy Sedlak> <[log in to unmask]>

Fri, 8 Dec 2000 10:14:09 EST

36 lines

Re: GOLD PLATING DEFECT

Mark Mazzoli <[log in to unmask]>

Tue, 12 Dec 2000 16:41:38 -0800

55 lines

Re: GOLD PLATING DEFECT

Charles E. McMahon <[log in to unmask]>

Tue, 12 Dec 2000 23:28:15 -0500

82 lines

New Thread

Grad Schools with PCB Research

Re: Grad Schools with PCB Research

Murugan Vasudevan <[log in to unmask]>

Mon, 4 Dec 2000 13:49:36 -0800

70 lines

New Thread

Happy Holidays

Happy Holidays

pratap <[log in to unmask]>

Mon, 18 Dec 2000 21:57:20 -0800

42 lines

New Thread

Happy New Year.

Happy New Year.

Ketan Bhatt <[log in to unmask]>

Thu, 28 Dec 2000 20:46:39 +0530

25 lines

New Thread

Heat dissipation

Heat dissipation

LI YUAN <[log in to unmask]>

Fri, 1 Dec 2000 17:46:11 -0700

35 lines

Re: Heat dissipation

Dwight Mattix <[log in to unmask]>

Mon, 4 Dec 2000 12:23:06 -0800

61 lines

New Thread

Heller table top ovens

Heller table top ovens

West, Jim <[log in to unmask]>

Wed, 13 Dec 2000 09:45:55 -0500

38 lines

Re: Heller table top ovens

Charlie Pitarys <[log in to unmask]>

Wed, 13 Dec 2000 12:03:38 -0500

71 lines

Re: Heller table top ovens

Kasprzak, Bill (esd) USX <[log in to unmask]>

Fri, 15 Dec 2000 07:17:28 -0500

71 lines

New Thread

HI-Pot Test

HI-Pot Test

Lester Agcaoili <[log in to unmask]>

Fri, 29 Dec 2000 17:01:04 -0800

27 lines

Re: HI-Pot Test

Doug <[log in to unmask]>

Fri, 29 Dec 2000 19:47:09 -0800

33 lines

New Thread

High temp gloves and support for mini-wave

High temp gloves and support for mini-wave

Julien Bouchard <[log in to unmask]>

Fri, 22 Dec 2000 11:41:46 -0500

40 lines

Re: High temp gloves and support for mini-wave

Thorup, John <[log in to unmask]>

Fri, 22 Dec 2000 10:22:44 -0800

74 lines

New Thread

immersion silver and tin qual

immersion silver and tin qual

Ryan Grant <[log in to unmask]>

Wed, 20 Dec 2000 08:38:19 -0700

41 lines

Re: immersion silver and tin qual

Wenger, George M (George) <[log in to unmask]>

Wed, 20 Dec 2000 11:08:28 -0500

83 lines

Re: immersion silver and tin qual

Darrel Therriault <[log in to unmask]>

Wed, 20 Dec 2000 08:12:39 -0800

68 lines

Re: immersion silver and tin qual

Robert Lazzara <[log in to unmask]>

Wed, 20 Dec 2000 19:05:39 EST

37 lines

Re: immersion silver and tin qual

David Hillman <[log in to unmask]>

Thu, 21 Dec 2000 06:20:30 -0600

77 lines

Re: immersion silver and tin qual

Ryan Grant <[log in to unmask]>

Thu, 21 Dec 2000 08:07:44 -0700

111 lines

New Thread

impedance testing... the question

impedance testing... the question

Steve Underwood <[log in to unmask]>

Thu, 14 Dec 2000 13:49:48 -0500

47 lines

Re: impedance testing... the question

Anselmo, John <[log in to unmask]>

Thu, 14 Dec 2000 15:47:52 -0500

83 lines

Re: impedance testing... the question

John J Walker <[log in to unmask]>

Fri, 15 Dec 2000 04:17:43 -0500

81 lines

New Thread

Inquiry on IPC Standard Regarding Hole Measurement and Its Accept ab...

Re: Inquiry on IPC Standard Regarding Hole Measurement and Its Accept ab...

Robert Lazzara <[log in to unmask]>

Wed, 20 Dec 2000 22:06:26 EST

70 lines

New Thread

Inquiry on IPC Standard Regarding Hole Measurement and Its Accept ability

Inquiry on IPC Standard Regarding Hole Measurement and Its Accept ability

张苹 <[log in to unmask]>

Thu, 21 Dec 2000 09:41:58 +0800

44 lines

New Thread

Ionic contamination Limit

Ionic contamination Limit

Ken Patel <[log in to unmask]>

Wed, 13 Dec 2000 17:44:27 -0800

24 lines

Re: Ionic contamination Limit

Brian Ellis <[log in to unmask]>

Thu, 14 Dec 2000 09:20:22 +0200

73 lines

Re: Ionic contamination Limit

Lee Whiteman <[log in to unmask]>

Thu, 14 Dec 2000 10:22:21 -0500

90 lines

Re: Ionic contamination Limit

Brian Ellis <[log in to unmask]>

Thu, 14 Dec 2000 18:48:35 +0200

131 lines

Re: Ionic contamination Limit

Lee Whiteman <[log in to unmask]>

Thu, 14 Dec 2000 12:12:54 -0500

195 lines

Re: Ionic contamination Limit

Graham Naisbitt <[log in to unmask]>

Thu, 14 Dec 2000 18:01:22 -0000

86 lines

New Thread

IPC NEWS RELEASE- TECHNICAL STANDARDS FORUMS OPEN TO ALLATTENDEES AT IPC PRINTED CIRCUITS EXPO 2001

IPC NEWS RELEASE- TECHNICAL STANDARDS FORUMS OPEN TO ALLATTENDEES AT IPC PRINTED CIRCUITS EXPO 2001

Christopher Jorgensen <[log in to unmask]>

Thu, 14 Dec 2000 15:34:12 -0600

79 lines

New Thread

IPC-A-610 Barrel Vertical Fill Interpretation

Re: IPC-A-610 Barrel Vertical Fill Interpretation

Roberts Jon <[log in to unmask]>

Fri, 1 Dec 2000 06:58:00 -0600

158 lines

New Thread

IPC-MF-150

IPC-MF-150

Dave Kell <[log in to unmask]>

Wed, 27 Dec 2000 08:29:02 -0600

28 lines

Re: IPC-MF-150

Guy Ramsey <[log in to unmask]>

Wed, 27 Dec 2000 09:54:19 -0500

59 lines

Re: IPC-MF-150

Christopher Jorgensen <[log in to unmask]>

Wed, 27 Dec 2000 09:13:05 -0600

68 lines

New Thread

Land Bond Strength and Peel Strength-Help

Land Bond Strength and Peel Strength-Help

賴穗源( sylai ) Q80_5381 <[log in to unmask]>

Fri, 1 Dec 2000 20:43:54 +0800

81 lines

Re: Land Bond Strength and Peel Strength-Help

Mason Hu <[log in to unmask]>

Fri, 1 Dec 2000 11:48:40 -0600

46 lines

Re: Land Bond Strength and Peel Strength-Help

Mason Hu <[log in to unmask]>

Fri, 1 Dec 2000 11:50:36 -0600

49 lines

New Thread

land pattern for SOD323

land pattern for SOD323

Richard Hawkins <[log in to unmask]>

Wed, 20 Dec 2000 15:35:29 -0600

27 lines

Re: land pattern for SOD323

David Fish <[log in to unmask]>

Wed, 20 Dec 2000 21:39:24 -0800

46 lines

New Thread

languages

Re: languages

Timothy Reeves <[log in to unmask]>

Tue, 26 Dec 2000 15:12:10 -0800

44 lines

Re: languages

Brian Ellis <[log in to unmask]>

Wed, 27 Dec 2000 11:56:44 +0200

62 lines

New Thread

Lead protrusion

Lead protrusion

Bogdan Gabi <[log in to unmask]>

Mon, 4 Dec 2000 17:50:50 +0200

84 lines

Re: Lead protrusion

Guy Ramsey <[log in to unmask]>

Mon, 4 Dec 2000 12:51:20 -0500

123 lines

Re: Lead protrusion

Mike Sewell <[log in to unmask]>

Mon, 4 Dec 2000 17:38:17 EST

43 lines

New Thread

Legal question

Legal question

Frank Davies <[log in to unmask]>

Thu, 21 Dec 2000 13:02:21 -0000

75 lines

Re: Legal question

Guy Ramsey <[log in to unmask]>

Thu, 21 Dec 2000 08:31:48 -0500

164 lines

Re: Legal question

Brian Ellis <[log in to unmask]>

Thu, 21 Dec 2000 16:03:26 +0200

71 lines

Re: Legal question

Graham Naisbitt <[log in to unmask]>

Thu, 21 Dec 2000 17:18:24 -0000

182 lines

New Thread

masking for conformal coating

masking for conformal coating

Flick, Leo <[log in to unmask]>

Mon, 18 Dec 2000 11:54:20 -0500

74 lines

Re: masking for conformal coating

gleason <[log in to unmask]>

Mon, 18 Dec 2000 11:28:30 -0800

125 lines

Re: masking for conformal coating

Jon Moore <[log in to unmask]>

Mon, 18 Dec 2000 17:13:50 EST

36 lines

Re: masking for conformal coating

Graham Naisbitt <[log in to unmask]>

Mon, 18 Dec 2000 23:21:02 -0000

142 lines

Re: masking for conformal coating

Graham Naisbitt <[log in to unmask]>

Mon, 18 Dec 2000 23:22:39 -0000

76 lines

Re: masking for conformal coating

Kathy Kuhlow <[log in to unmask]>

Tue, 19 Dec 2000 08:41:31 -0600

54 lines

Re: masking for conformal coating

Jon Moore <[log in to unmask]>

Wed, 20 Dec 2000 10:26:29 EST

33 lines

Re: masking for conformal coating

Brad Kendall <[log in to unmask]>

Thu, 21 Dec 2000 05:26:29 -0800

72 lines

New Thread

Merry Christmas...

Merry Christmas...

Stephen R. Gregory <[log in to unmask]>

Mon, 25 Dec 2000 00:27:26 EST

25 lines

Re: Merry Christmas...

[log in to unmask]

Mon, 25 Dec 2000 14:15:07 EST

27 lines

New Thread

Microsoft Access Developer Needed

Microsoft Access Developer Needed

Dave Roesler <[log in to unmask]>

Fri, 29 Dec 2000 15:55:58 -0600

65 lines

New Thread

Nancy Reynolds/MKT/HQ/KEMET/US is out of the office.

Nancy Reynolds/MKT/HQ/KEMET/US is out of the office.

Nancy Reynolds/MKT/HQ/KEMET/US <[log in to unmask]>

Fri, 15 Dec 2000 01:01:22 -0500

24 lines

New Thread

need OSP vendor

need OSP vendor

Mark Hargreaves <[log in to unmask]>

Mon, 18 Dec 2000 15:37:44 -0500

27 lines

New Thread

Nitrogen and its uses. (help)

Nitrogen and its uses. (help)

Barry Gallegos <[log in to unmask]>

Fri, 15 Dec 2000 15:13:23 -0700

93 lines

Re: Nitrogen and its uses. (help)

Brian Ellis <[log in to unmask]>

Sat, 16 Dec 2000 09:46:14 +0200

53 lines

Re: Nitrogen and its uses. (help)

Lee Whiteman <[log in to unmask]>

Mon, 18 Dec 2000 11:44:56 -0500

279 lines

New Thread

Nomenclature with Immersion Tin/Silver

Nomenclature with Immersion Tin/Silver

Lisa Angle <[log in to unmask]>

Thu, 21 Dec 2000 15:45:44 -0500

30 lines

Re: Nomenclature with Immersion Tin/Silver

Wenger, George M (George) <[log in to unmask]>

Thu, 21 Dec 2000 16:13:38 -0500

69 lines

Re: Nomenclature with Immersion Tin/Silver

Lisa Angle <[log in to unmask]>

Thu, 21 Dec 2000 16:42:51 -0500

117 lines

Re: Nomenclature with Immersion Tin/Silver

Wenger, George M (George) <[log in to unmask]>

Thu, 21 Dec 2000 16:52:45 -0500

157 lines

Re: Nomenclature with Immersion Tin/Silver

Robert Lazzara <[log in to unmask]>

Thu, 21 Dec 2000 16:57:14 EST

36 lines

Re: Nomenclature with Immersion Tin/Silver

Timothy Reeves <[log in to unmask]>

Thu, 21 Dec 2000 17:01:36 -0800

47 lines

New Thread

Oops... Mixed Chemistry fluxes

Oops... Mixed Chemistry fluxes

Phil Nutting <[log in to unmask]>

Thu, 7 Dec 2000 16:50:52 -0500

44 lines

Re: Oops... Mixed Chemistry fluxes

<Rudy Sedlak> <[log in to unmask]>

Thu, 7 Dec 2000 20:30:37 EST

32 lines

Re: Oops... Mixed Chemistry fluxes

Brian Ellis <[log in to unmask]>

Fri, 8 Dec 2000 14:25:04 +0200

73 lines

Re: Oops... Mixed Chemistry fluxes

Pat Kane <[log in to unmask]>

Fri, 8 Dec 2000 09:15:07 EST

71 lines

New Thread

OSP coating

OSP coating

Mark Hargreaves <[log in to unmask]>

Tue, 19 Dec 2000 08:18:11 -0500

31 lines

New Thread

OSP PROCESS

OSP PROCESS

[log in to unmask]

Tue, 19 Dec 2000 10:53:24 EST

30 lines

Re: OSP PROCESS

Robert Lazzara <[log in to unmask]>

Tue, 19 Dec 2000 11:26:20 EST

43 lines

Re: OSP PROCESS

Alain Savard <[log in to unmask]>

Tue, 19 Dec 2000 12:37:26 -0500

73 lines

New Thread

OSP PROCESS/plugging of holes

Re: OSP PROCESS/plugging of holes

Edward Szpruch <[log in to unmask]>

Wed, 20 Dec 2000 07:43:46 +0200

144 lines

Re: OSP PROCESS/plugging of holes

Alain Savard <[log in to unmask]>

Wed, 20 Dec 2000 07:22:57 -0500

180 lines

Re: OSP PROCESS/plugging of holes

Robert Lazzara <[log in to unmask]>

Wed, 20 Dec 2000 11:46:44 EST

51 lines

New Thread

PCB Design Quiz (no technical content)

PCB Design Quiz (no technical content)

Olson, Jack <[log in to unmask]>

Wed, 27 Dec 2000 18:46:42 -0600

47 lines

Re: PCB Design Quiz (no technical content)

Stephen R. Gregory <[log in to unmask]>

Wed, 27 Dec 2000 21:16:48 EST

118 lines

Re: PCB Design Quiz (no technical content)

Olson, Jack <[log in to unmask]>

Wed, 27 Dec 2000 20:24:57 -0600

143 lines

New Thread

PCI mechanical spec.

PCI mechanical spec.

LeCain, Joseph H. <[log in to unmask]>

Thu, 7 Dec 2000 15:01:56 -0500

34 lines

Re: PCI mechanical spec.

Jeff Slipp <[log in to unmask]>

Thu, 7 Dec 2000 16:51:23 -0400

81 lines

Re: PCI mechanical spec.

Paul Bannister <[log in to unmask]>

Fri, 8 Dec 2000 08:13:59 -0500

75 lines

New Thread

placement machine characterization

placement machine characterization

thanigai kumar vellore <[log in to unmask]>

Tue, 19 Dec 2000 18:38:13 -0800

34 lines

New Thread

Pls sign off if you're on a holiday break...

Pls sign off if you're on a holiday break...

Jack Crawford <[log in to unmask]>

Fri, 22 Dec 2000 10:16:40 -0600

41 lines

New Thread

Power PCB Design Rules Guidlines

Power PCB Design Rules Guidlines

Roland Jaquet <[log in to unmask]>

Sun, 17 Dec 2000 18:45:11 +0100

87 lines

New Thread

Precision Spray Valve

Precision Spray Valve

Chico Almeras <[log in to unmask]>

Fri, 22 Dec 2000 19:43:21 -0500

29 lines

New Thread

PRESIÓN DE VACÍO

PRESIÓN DE VACÍO

Fernando Gómez <[log in to unmask]>

Thu, 21 Dec 2000 18:06:11 +0100

82 lines

New Thread

pth plating repair

pth plating repair

TOE /Torben Østeraa <[log in to unmask]>

Mon, 18 Dec 2000 10:06:58 +0100

34 lines

Re: pth plating repair

Roland Jaquet <[log in to unmask]>

Mon, 18 Dec 2000 12:07:31 +0100

81 lines

Re: pth plating repair

Robert Lazzara <[log in to unmask]>

Mon, 18 Dec 2000 07:52:14 EST

41 lines

New Thread

pulse plating of copper

pulse plating of copper

Russell Burdick <[log in to unmask]>

Thu, 21 Dec 2000 10:14:54 -0700

30 lines

Re: pulse plating of copper

Mordechai Holtzman <[log in to unmask]>

Thu, 21 Dec 2000 12:30:08 EST

64 lines

Re: pulse plating of copper

George Milad <[log in to unmask]>

Thu, 21 Dec 2000 15:34:54 EST

34 lines

New Thread

Quality Tracking Software

Re: Quality Tracking Software

Mark Orlowski <[log in to unmask]>

Thu, 14 Dec 2000 08:12:36 -0600

36 lines

New Thread

Query: industry standard for pretreating PWB/PCB before underfilling?

Query: industry standard for pretreating PWB/PCB before underfilling?

Hann Pang <[log in to unmask]>

Tue, 5 Dec 2000 11:26:56 -0600

31 lines

Re: Query: industry standard for pretreating PWB/PCB before underfilling?

Hans Hinners <[log in to unmask]>

Tue, 5 Dec 2000 10:00:15 -0800

72 lines

Re: Query: industry standard for pretreating PWB/PCB before underfilling?

Hann Pang <[log in to unmask]>

Tue, 5 Dec 2000 12:14:39 -0600

102 lines

Re: Query: industry standard for pretreating PWB/PCB before underfilling?

Guy Ramsey <[log in to unmask]>

Tue, 5 Dec 2000 14:48:02 -0500

67 lines

Re: Query: industry standard for pretreating PWB/PCB before underfilling?

Hann Pang <[log in to unmask]>

Wed, 6 Dec 2000 13:46:27 -0600

167 lines

New Thread

Re Soldering Iron Temperatures

Re Soldering Iron Temperatures

James Moffitt <[log in to unmask]>

Fri, 29 Dec 2000 14:36:55 EST

78 lines

New Thread

Re-sealing Moisture Sensitive Components

Re-sealing Moisture Sensitive Components

Rick Thompson <[log in to unmask]>

Thu, 7 Dec 2000 14:21:18 -0800

40 lines

Re: Re-sealing Moisture Sensitive Components

Jack Crawford <[log in to unmask]>

Thu, 7 Dec 2000 17:48:09 -0600

61 lines

Re: Re-sealing Moisture Sensitive Components

Campbell, William (wcampbel) <[log in to unmask]>

Fri, 8 Dec 2000 08:16:29 -0500

63 lines

Re: Re-sealing Moisture Sensitive Components

Ryan Grant <[log in to unmask]>

Mon, 11 Dec 2000 09:44:05 -0700

109 lines

Re: Re-sealing Moisture Sensitive Components

Phil Zarrow <[log in to unmask]>

Mon, 11 Dec 2000 12:19:53 EST

50 lines

New Thread

RE: [TN] PRESIÓN DE VACÍO

Re: RE: [TN] PRESIÓN DE VACÍO

Brian Ellis <[log in to unmask]>

Fri, 22 Dec 2000 15:05:54 +0200

64 lines

Re: Re: [TN] PRESIÓN DE VACÍO

Brian Ellis <[log in to unmask]>

Sat, 23 Dec 2000 10:16:11 +0200

88 lines

New Thread

Re: [TN] Re: [TN] PRESIÓN DE VACÍO

Re: Re: [TN] Re: [TN] PRESIÓN DE VACÍO

Brian Ellis <[log in to unmask]>

Sun, 24 Dec 2000 13:04:02 +0200

58 lines

New Thread

Re: [TN] Re: [TN] RE: [TN]RE: [TN] PRESIÓN DE VACÍO

Re: Re: [TN] Re: [TN] RE: [TN]RE: [TN] PRESIÓN DE VACÍO

Brian Ellis <[log in to unmask]>

Sat, 23 Dec 2000 10:25:56 +0200

173 lines

New Thread

Recommendations on Conveyor Systems

Recommendations on Conveyor Systems

Hans Hinners <[log in to unmask]>

Sat, 16 Dec 2000 15:46:35 -0800

36 lines

Re: Recommendations on Conveyor Systems

Jeff Ferry <[log in to unmask]>

Sat, 16 Dec 2000 23:45:49 -0600

64 lines

Re: Recommendations on Conveyor Systems

Lee Whiteman <[log in to unmask]>

Mon, 18 Dec 2000 16:00:04 -0500

82 lines

Re: Recommendations on Conveyor Systems

Lee Whiteman <[log in to unmask]>

Mon, 18 Dec 2000 16:17:54 -0500

100 lines

Re: Recommendations on Conveyor Systems

Stephen S. Schiera <[log in to unmask]>

Tue, 19 Dec 2000 12:03:42 -0600

108 lines

Re: Recommendations on Conveyor Systems

Brad Kendall <[log in to unmask]>

Thu, 21 Dec 2000 05:33:45 -0800

159 lines

Re: Recommendations on Conveyor Systems

Joel Brock <[log in to unmask]>

Fri, 22 Dec 2000 15:57:09 -0600

211 lines

New Thread

Rejected Posting Notices

Rejected Posting Notices

Keach Sasamori <[log in to unmask]>

Wed, 6 Dec 2000 17:24:13 -0600

36 lines

New Thread

Rejected posting to [log in to unmask]

Re: Rejected posting to [log in to unmask]

Stephen R. Gregory <[log in to unmask]>

Tue, 5 Dec 2000 13:38:59 EST

44 lines

Re: Rejected posting to [log in to unmask]

Miguel Vallejo <[log in to unmask]>

Tue, 5 Dec 2000 13:46:09 -0800

70 lines

Re: Rejected posting to [log in to unmask]

Graham Naisbitt <[log in to unmask]>

Tue, 5 Dec 2000 23:48:48 -0000

85 lines

Re: Rejected posting to [log in to unmask]

Campbell, William (wcampbel) <[log in to unmask]>

Wed, 6 Dec 2000 08:19:18 -0500

108 lines

Re: Rejected posting to [log in to unmask]

Graham Naisbitt <[log in to unmask]>

Wed, 6 Dec 2000 21:05:05 -0000

107 lines

New Thread

Reliability tests for BGA assemblies

Reliability tests for BGA assemblies

Michael McInerney <[log in to unmask]>

Wed, 27 Dec 2000 11:47:56 -0500

33 lines

Re: Reliability tests for BGA assemblies

Werner Engelmaier <[log in to unmask]>

Wed, 27 Dec 2000 20:23:05 EST

31 lines

New Thread

Repair of fiducial fill material

Repair of fiducial fill material

Julien Bouchard <[log in to unmask]>

Tue, 12 Dec 2000 14:24:40 -0500

34 lines

Re: Repair of fiducial fill material

Kathy Jenczewski <[log in to unmask]>

Tue, 12 Dec 2000 15:06:23 -0500

59 lines

Re: Repair of fiducial fill material

Earl Moon <[log in to unmask]>

Tue, 12 Dec 2000 14:12:42 -0600

47 lines

Re: Repair of fiducial fill material

Trevor Goddard <[log in to unmask]>

Tue, 12 Dec 2000 15:51:45 -0500

75 lines

Re: Repair of fiducial fill material

Mike Sewell <[log in to unmask]>

Tue, 12 Dec 2000 16:09:27 EST

45 lines

Re: Repair of fiducial fill material

David Fish <[log in to unmask]>

Tue, 12 Dec 2000 16:17:16 -0800

53 lines

Re: Repair of fiducial fill material

Joe V. Ottesen <[log in to unmask]>

Fri, 15 Dec 2000 08:21:16 +0100

57 lines

Re: Repair of fiducial fill material

Julien Bouchard <[log in to unmask]>

Fri, 15 Dec 2000 07:38:42 -0500

93 lines

Re: Repair of fiducial fill material

Joe V. Ottesen <[log in to unmask]>

Fri, 15 Dec 2000 14:18:59 +0100

117 lines

Re: Repair of fiducial fill material

Taylor, Royce <[log in to unmask]>

Fri, 15 Dec 2000 09:34:59 -0500

135 lines

Re: Repair of fiducial fill material

Stephen S. Schiera <[log in to unmask]>

Fri, 15 Dec 2000 10:09:04 -0600

80 lines

New Thread

Rogers BendFlex Substitute

Rogers BendFlex Substitute

Brock Hunter <[log in to unmask]>

Tue, 19 Dec 2000 08:46:58 -0500

66 lines

Re: Rogers BendFlex Substitute

Hans Hinners <[log in to unmask]>

Tue, 19 Dec 2000 08:44:57 -0800

74 lines

Re: Rogers BendFlex Substitute

Geoff Layhe <[log in to unmask]>

Wed, 20 Dec 2000 09:01:02 -0000

58 lines

New Thread

Scratched double treat material

Scratched double treat material

Mark Hargreaves <[log in to unmask]>

Mon, 11 Dec 2000 16:34:23 -0500

28 lines

Re: Scratched double treat material

Chuck Brummer <[log in to unmask]>

Mon, 11 Dec 2000 15:09:26 -0800

46 lines

Re: Scratched double treat material

Hans Hinners <[log in to unmask]>

Mon, 11 Dec 2000 16:58:20 -0800

72 lines

New Thread

seasons greetings

seasons greetings

Karen Tellefsen <[log in to unmask]>

Sat, 9 Dec 2000 13:01:45 -0500

45 lines

New Thread

SET Technet NOMAIL

SET Technet NOMAIL

John Buck <[log in to unmask]>

Fri, 22 Dec 2000 11:48:48 -0500

45 lines

New Thread

Small Nitrogen Reflow Oven

Small Nitrogen Reflow Oven

Charles Elliott <[log in to unmask]>

Thu, 14 Dec 2000 10:50:05 -0500

32 lines

Re: Small Nitrogen Reflow Oven

Mark Gilbert <[log in to unmask]>

Thu, 14 Dec 2000 11:26:45 -0500

69 lines

Re: Small Nitrogen Reflow Oven

Cal Driscoll <[log in to unmask]>

Thu, 14 Dec 2000 16:45:42 -0500

68 lines

Re: Small Nitrogen Reflow Oven

Brad Kendall <[log in to unmask]>

Fri, 15 Dec 2000 13:43:34 -0800

68 lines

New Thread

Small wave soldering machines with nitrogen

Small wave soldering machines with nitrogen

Rob M Horsley <[log in to unmask]>

Thu, 7 Dec 2000 10:11:49 +0000

40 lines

Re: Small wave soldering machines with nitrogen

Patty Yancey <[log in to unmask]>

Thu, 7 Dec 2000 07:35:25 -0500

186 lines

New Thread

SNEC Meeting

SNEC Meeting

Gary Ferrari <[log in to unmask]>

Mon, 11 Dec 2000 12:00:32 EST

70 lines

New Thread

Solder Baskets

Solder Baskets

Sprowles, Jol <[log in to unmask]>

Tue, 5 Dec 2000 14:00:10 -0500

72 lines

Re: Solder Baskets

Carroll, George <[log in to unmask]>

Tue, 5 Dec 2000 14:49:10 -0500

47 lines

Re: Solder Baskets

<Rudy Sedlak> <[log in to unmask]>

Tue, 5 Dec 2000 19:09:11 EST

27 lines

Re: Solder Baskets

Barmuta, Mike <[log in to unmask]>

Wed, 6 Dec 2000 08:04:58 -0800

53 lines

New Thread

Solder Failure During SMT/Wave Solder

Solder Failure During SMT/Wave Solder

Jim Kittel <[log in to unmask]>

Thu, 14 Dec 2000 15:28:51 -0700

51 lines

Re: Solder Failure During SMT/Wave Solder

gleason <[log in to unmask]>

Thu, 14 Dec 2000 16:55:09 -0800

85 lines

Re: Solder Failure During SMT/Wave Solder

Stephen R. Gregory <[log in to unmask]>

Thu, 14 Dec 2000 19:03:34 EST

42 lines

Re: Solder Failure During SMT/Wave Solder

Jowan Iven <[log in to unmask]>

Fri, 15 Dec 2000 08:36:45 +0100

112 lines

Re: Solder Failure During SMT/Wave Solder

Wenger, George M (George) <[log in to unmask]>

Fri, 15 Dec 2000 08:48:27 -0500

91 lines

New Thread

Solder Failure/Thanks

Solder Failure/Thanks

Jim Kittel <[log in to unmask]>

Fri, 15 Dec 2000 07:47:05 -0700

48 lines

Re: Solder Failure/Thanks

Jowan Iven <[log in to unmask]>

Fri, 15 Dec 2000 17:27:54 +0100

78 lines

New Thread

Solderability Testing

Solderability Testing

Mike Sewell <[log in to unmask]>

Thu, 14 Dec 2000 10:09:23 EST

39 lines

Re: Solderability Testing

Marsico, James <[log in to unmask]>

Thu, 14 Dec 2000 10:36:30 -0500

43 lines

Re: Solderability Testing

David Hillman <[log in to unmask]>

Thu, 14 Dec 2000 13:18:48 -0600

58 lines

New Thread

Soldering iron temperature

Soldering iron temperature

Lou Hart <[log in to unmask]>

Thu, 28 Dec 2000 13:18:33 -0500

33 lines

Re: Soldering iron temperature

Phil Nutting <[log in to unmask]>

Thu, 28 Dec 2000 13:42:50 -0500

103 lines

Re: Soldering iron temperature

Guy Ramsey <[log in to unmask]>

Thu, 28 Dec 2000 13:47:41 -0500

76 lines

Re: Soldering iron temperature

Brian Ellis <[log in to unmask]>

Fri, 29 Dec 2000 11:11:02 +0200

99 lines

Re: Soldering iron temperature

Kathy Kuhlow <[log in to unmask]>

Fri, 29 Dec 2000 09:40:41 -0600

129 lines

Re: Soldering iron temperature

Larry Tawyea <[log in to unmask]>

Fri, 29 Dec 2000 11:10:57 EST

47 lines

Re: Soldering iron temperature

Jeff Ferry <[log in to unmask]>

Fri, 29 Dec 2000 11:31:25 -0600

68 lines

Re: Soldering iron temperature

Ed Valentine <[log in to unmask]>

Fri, 29 Dec 2000 21:20:37 -0500

80 lines

New Thread

Soletec 6622C Wave Solder Machine

Soletec 6622C Wave Solder Machine

Richard Sperandio <[log in to unmask]>

Fri, 1 Dec 2000 14:21:10 -0800

58 lines

Soletec 6622C Wave Solder Machine

Richard Sperandio <[log in to unmask]>

Fri, 1 Dec 2000 14:24:34 -0800

58 lines

New Thread

Soltec 6622C Wave Solder Machine

Re: Soltec 6622C Wave Solder Machine

Alan Kreplick <[log in to unmask]>

Fri, 1 Dec 2000 17:46:26 -0500

61 lines

New Thread

Someone sent me a virus..but I'm not infected.

Someone sent me a virus..but I'm not infected.

Stephen R. Gregory <[log in to unmask]>

Thu, 28 Dec 2000 14:06:31 EST

122 lines

New Thread

Specification Comparison

Specification Comparison

Don Vischulis <[log in to unmask]>

Fri, 22 Dec 2000 09:55:01 -0700

42 lines

New Thread

squeegee blade assembly storage

squeegee blade assembly storage

Campbell, William (wcampbel) <[log in to unmask]>

Thu, 7 Dec 2000 09:10:32 -0500

29 lines

Re: squeegee blade assembly storage

Earl Moon <[log in to unmask]>

Sat, 9 Dec 2000 07:10:44 -0600

35 lines

Re: squeegee blade assembly storage

Campbell, William (wcampbel) <[log in to unmask]>

Mon, 11 Dec 2000 09:48:24 -0500

79 lines

Re: squeegee blade assembly storage

Earl Moon <[log in to unmask]>

Mon, 11 Dec 2000 12:45:12 -0600

22 lines

New Thread

Strange cap Layout

Strange cap Layout

Kuczynski, Michael @ SPACENAV <[log in to unmask]>

Fri, 1 Dec 2000 07:35:25 -0500

44 lines

Re: Strange cap Layout

Paul Fly <[log in to unmask]>

Fri, 1 Dec 2000 08:20:21 -0500

110 lines

Re: Strange cap Layout

Brian Ellis <[log in to unmask]>

Fri, 1 Dec 2000 15:41:04 +0200

66 lines

Re: Strange cap Layout

Terveen, James @ NARDAEAST <[log in to unmask]>

Fri, 1 Dec 2000 10:29:54 -0500

70 lines

Re: Strange cap Layout

Jeff Seeger <[log in to unmask]>

Fri, 1 Dec 2000 14:39:50 -0500

74 lines

Re: Strange cap Layout

Olson, Jack <[log in to unmask]>

Mon, 4 Dec 2000 09:56:33 -0600

95 lines

Re: Strange cap Layout

Smith-BCD, Richard <[log in to unmask]>

Mon, 4 Dec 2000 10:40:05 -0600

113 lines

Re: Strange cap Layout

Earl Moon <[log in to unmask]>

Mon, 4 Dec 2000 16:03:54 -0600

21 lines

New Thread

TAPE & REEL POCKET SIZES

TAPE & REEL POCKET SIZES

Marsico, James <[log in to unmask]>

Mon, 4 Dec 2000 14:47:49 -0500

25 lines

Re: TAPE & REEL POCKET SIZES

Stephen R. Gregory <[log in to unmask]>

Mon, 4 Dec 2000 15:49:30 EST

43 lines

Re: TAPE & REEL POCKET SIZES

Marsico, James <[log in to unmask]>

Tue, 5 Dec 2000 08:18:42 -0500

78 lines

New Thread

tape test on the IMG surface

tape test on the IMG surface

胡宏隆\(allenhu\) Q80_5380 <[log in to unmask]>

Fri, 15 Dec 2000 09:06:11 +0800

81 lines

Re: tape test on the IMG surface

Russell Burdick <[log in to unmask]>

Fri, 15 Dec 2000 11:19:27 -0700

71 lines

Re: tape test on the IMG surface

George Milad <[log in to unmask]>

Sun, 17 Dec 2000 05:30:28 EST

27 lines

New Thread

Test

Test

Stephen R. Gregory <[log in to unmask]>

Wed, 6 Dec 2000 19:40:37 EST

19 lines

test

Jason Gregory <[log in to unmask]>

Fri, 29 Dec 2000 15:50:13 -0600

21 lines

New Thread

Testing Solderability

Testing Solderability

Ron Waugh <[log in to unmask]>

Thu, 14 Dec 2000 16:59:12 -0500

36 lines

Re: Testing Solderability

Ted Stern <[log in to unmask]>

Fri, 15 Dec 2000 08:25:26 -0600

56 lines

New Thread

Thin-film specialist

Re: Thin-film specialist

Ingemar Hernefjord (EMW) <[log in to unmask]>

Fri, 1 Dec 2000 10:18:44 +0100

34 lines

Re: Thin-film specialist

pratap <[log in to unmask]>

Fri, 1 Dec 2000 16:19:29 -0800

26 lines

Re: Thin-film specialist

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 4 Dec 2000 09:12:36 +0100

51 lines

New Thread

Tin Plate Leaching...

Tin Plate Leaching...

Stephen R. Gregory <[log in to unmask]>

Mon, 11 Dec 2000 19:32:15 EST

26 lines

Re: Tin Plate Leaching...

<Rudy Sedlak> <[log in to unmask]>

Mon, 11 Dec 2000 21:09:18 EST

44 lines

Re: Tin Plate Leaching...

Stephen R. Gregory <[log in to unmask]>

Mon, 11 Dec 2000 22:12:32 EST

60 lines

Re: Tin Plate Leaching...

Earl Moon <[log in to unmask]>

Tue, 12 Dec 2000 04:49:45 -0600

30 lines

Re: Tin Plate Leaching...

Brian Ellis <[log in to unmask]>

Tue, 12 Dec 2000 14:25:26 +0200

51 lines

Re: Tin Plate Leaching...

<Rudy Sedlak> <[log in to unmask]>

Tue, 12 Dec 2000 09:32:36 EST

53 lines

Re: Tin Plate Leaching...

Mike Fenner <[log in to unmask]>

Tue, 12 Dec 2000 20:55:30 -0000

79 lines

New Thread

Track width to pad width.

Track width to pad width.

Ketan Bhatt <[log in to unmask]>

Sat, 30 Dec 2000 12:33:29 +0530

35 lines

New Thread

unsubscribe

unsubscribe

Hollandsworth, Ron <[log in to unmask]>

Thu, 21 Dec 2000 12:39:19 -0500

28 lines

New Thread

Vacuum packing for HASL surface finish

Vacuum packing for HASL surface finish

Le Dai Tri <[log in to unmask]>

Wed, 20 Dec 2000 17:19:04 +0700

106 lines

New Thread

WARP

WARP

Tony Steinke <[log in to unmask]>

Tue, 19 Dec 2000 13:52:08 -0500

89 lines

Re: WARP

Hans Hinners <[log in to unmask]>

Tue, 19 Dec 2000 12:24:01 -0800

173 lines

Re: WARP

Robert Lazzara <[log in to unmask]>

Tue, 19 Dec 2000 15:32:03 EST

47 lines

New Thread

warped pcb control

warped pcb control

xs <[log in to unmask]>

Sat, 23 Dec 2000 02:29:42 +0800

31 lines

New Thread

Warranty

Warranty

Rod Smith <[log in to unmask]>

Fri, 1 Dec 2000 14:58:11 -0500

29 lines

New Thread

Wave Solder 1210 Chip Caps

Wave Solder 1210 Chip Caps

Ken Bloomquist <[log in to unmask]>

Tue, 5 Dec 2000 08:32:35 -0800

26 lines

Re: Wave Solder 1210 Chip Caps

Rick Howieson <[log in to unmask]>

Tue, 5 Dec 2000 09:32:58 -0700

50 lines

Re: Wave Solder 1210 Chip Caps

Kathy Kuhlow <[log in to unmask]>

Tue, 5 Dec 2000 10:43:15 -0600

102 lines

New Thread

wedge void

wedge void

th_yeo <[log in to unmask]>

Fri, 15 Dec 2000 08:41:14 +0800

33 lines

Re: wedge void

[log in to unmask]

Thu, 14 Dec 2000 20:22:11 EST

41 lines

Re: wedge void

Dennis Fritz <[log in to unmask]>

Fri, 15 Dec 2000 09:19:22 EST

54 lines

New Thread

What is the going price for ceramic fiber optic ferrules?

What is the going price for ceramic fiber optic ferrules?

Russell Epstein <[log in to unmask]>

Thu, 28 Dec 2000 15:07:57 -0600

36 lines

Re: What is the going price for ceramic fiber optic ferrules?

Creswick <[log in to unmask]>

Thu, 28 Dec 2000 16:35:06 -0500

71 lines

New Thread

What PCB Software can do stencil design close to IPC-752 5?

Re: What PCB Software can do stencil design close to IPC-752 5?

Boldt, Mike (msd) USX <[log in to unmask]>

Wed, 20 Dec 2000 09:14:41 -0500

78 lines

New Thread

What PCB Software can do stencil design close to IPC-7525?

What PCB Software can do stencil design close to IPC-7525?

PCBA <[log in to unmask]>

Wed, 20 Dec 2000 10:34:32 +0800

28 lines

New Thread

White Spots

White Spots

Scott B. Westheimer <[log in to unmask]>

Tue, 12 Dec 2000 08:57:08 +0800

25 lines

White Spots

Scott B. Westheimer <[log in to unmask]>

Wed, 13 Dec 2000 13:44:13 +0800

53 lines

Re: White Spots

Phil Crepeau <[log in to unmask]>

Wed, 13 Dec 2000 07:33:40 -0800

35 lines

New Thread

[TN] Re: [TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO

Re: [TN] Re: [TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO

Mike Fenner <[log in to unmask]>

Fri, 22 Dec 2000 19:50:48 -0000

147 lines

RE: [TN] Re: [TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO

Ahne Oosterhof <[log in to unmask]>

Fri, 22 Dec 2000 14:33:26 -0800

116 lines

New Thread

[TN] PRESIÓN DE VACÍO

RE: [TN] PRESIÓN DE VACÍO

Angel Pulido <[log in to unmask]>

Thu, 21 Dec 2000 12:22:53 -0500

45 lines

RE: [TN] PRESIÓN DE VACÍO

Juan Sanchez <[log in to unmask]>

Thu, 21 Dec 2000 12:24:06 -0500

44 lines

RE: [TN] PRESIÓN DE VACÍO

Hans Shin <[log in to unmask]>

Thu, 21 Dec 2000 09:38:16 -0800

63 lines

Re: [TN] PRESIÓN DE VACÍO

Werner Engelmaier <[log in to unmask]>

Fri, 22 Dec 2000 15:32:20 EST

48 lines

Re: [TN] PRESIÓN DE VACÍO

Mark Gilbert <[log in to unmask]>

Wed, 27 Dec 2000 08:42:12 -0500

189 lines

New Thread

[TN] RE: [TN] PRESIÓN DE VACÍO

RE: [TN] RE: [TN] PRESIÓN DE VACÍO

Campbell, William (wcampbel) <[log in to unmask]>

Thu, 21 Dec 2000 15:34:21 -0500

98 lines

RE: [TN] RE: [TN] PRESIÓN DE VACÍO

Miguel Vallejo <[log in to unmask]>

Thu, 21 Dec 2000 16:59:00 -0800

102 lines

RE: [TN] RE: [TN] PRESIÓN DE VACÍO

Miguel Vallejo <[log in to unmask]>

Fri, 22 Dec 2000 08:26:41 -0800

124 lines

Re: [TN] Re: [TN] PRESIÓN DE VACÍO

Stephen R. Gregory <[log in to unmask]>

Sat, 23 Dec 2000 18:24:25 EST

33 lines

New Thread

[TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO

Re: [TN] RE: [TN] RE: [TN] PRESIÓN DE VACÍO

Stephen R. Gregory <[log in to unmask]>

Fri, 22 Dec 2000 14:09:04 EST

113 lines

New Thread

[TN]Re: [TN] Re: [TN] PRESIÓN DE VACÍO

Re: [TN]Re: [TN] Re: [TN] PRESIÓN DE VACÍO

Stephen R. Gregory <[log in to unmask]>

Sun, 24 Dec 2000 20:54:32 EST

39 lines

New Thread

[TN} Quality/Yield Tracking Software.

Re: [TN} Quality/Yield Tracking Software.

Poh Kong Hui <[log in to unmask]>

Thu, 14 Dec 2000 00:11:14 +0800

31 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager