LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


June 2000


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

"The Kobiyahshi Muru", or the no-win scenario... (4 messages)
0805 SMD capacitor bridging problem (2 messages)
1206 Capacitors on 1812 Pads (3 messages)
28 Ohm Airline Standard (2 messages)
3D Modeling (4 messages)
: CAD format (7 messages)
: Quantify Flux Residue (3 messages)
: Tooltronics Ultraclean II repair? (1 message)
<No subject> (5 messages)
About contamination testing (2 messages)
About rework technology (3 messages)
ADMIN REPLY: [TN] To be Lead-Free (2 messages)
Ag on Ni - effect of baking (11 messages)
Ag on Ni - effect of baking in sun , related tech conten t (3 messages)
Air conditioning in assembly areas (2 messages)
aluminum bonded PCB (6 messages)
AMKOR engineering contact (1 message)
Any IPC specifications on more than 1 wires/leads per through-hole (1 message)
Anyone wave soldering SMA (DO-214AC) diodes? (2 messages)
Application Sides (2 messages)
Applied Voltage across the anode and cathode (1 message)
Au on Ni (1 message)
Au on Ni , back to cooking of Ag on Ni (2 messages)
Auto-insertion lead-to-hole ratios... (8 messages)
AW: info about creepage distance (1 message)
AW: Mask coming off again...repair recomendations. (1 message)
Axial lead preparation (6 messages)
Baking of boards (26 messages)
BeCu with bright tin finish solderability (3 messages)
BGA application (2 messages)
BGA Design and CTE Mismatch (2 messages)
BGA inspection other than X-ray (2 messages)
BGA pads size (6 messages)
Black nickel barrier problem w/immersion Ni/Ag (2 messages)
blind via fill (2 messages)
Board cleaning (8 messages)
Board thickness (1 message)
Board Vender Date Code/Logo Search (2 messages)
Boards Cleaning II (4 messages)
Burn in board? (2 messages)
CADSTAR Placement file (3 messages)
Capacitor issues (resistors do it too!) (2 messages)
Capacitor issues... (2 messages)
Change in Dielectric over Temp (2 messages)
Chip backside metal (3 messages)
Chip backside metal (poor thermal conductivity of polyme rs) (1 message)
Chip backside metal (poor thermal conductivity of polymers) (1 message)
Chloride - Chlorine (6 messages)
Cleanroom (2 messages)
component analysis lab (1 message)
component Hole dia v/s lead dia for better solder fillet (4 messages)
Component packages (5 messages)
Conclusion of confusion (1 message)
DFM Statement (2 messages)
Digital Camera (1 message)
Direct Metalization (2 messages)
Direct Metalization of LPI (3 messages)
Disposal of FR-4 scrap and offcuts (5 messages)
Documents for mil-std-105D or E ??? (2 messages)
DOD Designs... (12 messages)
Double sided boards using only (2 messages)
Double sided boards using only one stencil (3 messages)
Drill bits & router bits (1 message)
Dual Gauge Lead Frame Supplier (1 message)
Dual Gauge Lead Frames (1 message)
Duplicated messages? (1 message)
E-mail forum break in service 30 June (1 message)
Electrical testing of bare board (4 messages)
Electroplating reference book (2 messages)
Environmental Alert: Etchant Recycling in California (1 message)
EOS-models for bi/unipolar semis (3 messages)
ESD Coats (17 messages)
ESD Lab coats (3 messages)
ESD requirements at higher temperatures. (2 messages)
Etchant Recycling Situation (1 message)
Exchange capacitors (1 message)
Failure Rate for Reflow Process (2 messages)
Filled via holes (7 messages)
Fire protection and electronic parts (1 message)
FITS (1 message)
Flip chip (3 messages)
Flip chip underfill delamination (2 messages)
Fluorinert FC-43 (1 message)
FR4 (2 messages)
FR4 Shortages - is there a problem? (4 messages)
FW: Do NOT OPEN Life STAGES (1 message)
FW: [TN] Auto-insertion lead-to-hole ratios... (1 message)
FW: [TN] Other visual tests under a BGA possible? (1 message)
Fwd: RE: [TN] Immersion White Tin (1 message)
GaAs Cracks (4 messages)
Generic question about Flux types... (9 messages)
Gold over Copper?!? (11 messages)
Gold over Copper?!? (II) (2 messages)
half-a-hole (4 messages)
High Temperature PWB (5 messages)
ic-packages (2 messages)
Immersion Silver/Tin PCB Supplier in Asia (1 message)
Immersion Tin Suppliers (3 messages)
Immersion White Tin (9 messages)
Inductor measuring equipment... (3 messages)
info about creepage distance (8 messages)
Interpretation of JEDEC requirements (2 messages)
Intrusive Reflow (4 messages)
IPC designer certification - Paper Doll (4 messages)
IPC Listserv Up (1 message)
IPC Listserv will be down at 2:00 PM CDT (1 message)
IPC Roadmap Draft IV Available for Review and Comment (1 message)
IPC test labs (8 messages)
IPC-1731 Available for Free Download (1 message)
kgf/pcs unit? (4 messages)
Laminate condition (12 messages)
LCD Design Bureaus (1 message)
Lead Forming and Component Placement Questions (6 messages)
lead straightening procedure (3 messages)
Life stages (2 messages)
Life stages virus (9 messages)
Life stages virus detection (1 message)
Life stages virus, just a thought !! (3 messages)
Lifted Land was <No Subject> (4 messages)
Linewidth Question (2 messages)
Loaded board rework (14 messages)
Looking for Information (1 message)
looking for prototype subcontractor (1 message)
Loss of a Tech Netter (2 messages)
Mask coming off again...repair recomendations. (2 messages)
Materials for capacitors (2 messages)
Materials Testing Laboratory (5 messages)
Mercury Vapor vs.Metal Halide (1 message)
MIL question (1 message)
MIL-2000A DIP lead clinch requirement? (4 messages)
MTC Tray Material? (3 messages)
Multi layer ceramic fab (5 messages)
Need Component Placement Info (6 messages)
Need Flux neutralizer replacement (2 messages)
New J-STD-001 B to C video (1 message)
non-contact flying probe (4 messages)
non-contact flying probe...more info (3 messages)
Note from KEMET (1 message)
OT Admin (3 messages)
Other visual tests under a BGA possible? (17 messages)
Out-of-Office Auto-Replies (1 message)
oval pin into oval hole (9 messages)
Package Reliabiity Testing. (1 message)
PADS format compatibility (1 message)
Palladium > Nickel (10 messages)
Palladium Barrier (2 messages)
Palladium query (4 messages)
paper carrier tape thickness (1 message)
PC401 Soldermask (3 messages)
PCB fab chemical question (5 messages)
PCB Inspection (13 messages)
PCB Inspection - Alain Savards reference. (3 messages)
PCB Inspection Cos. In Asia (1 message)
PCB Materials/Soldermask (3 messages)
PCB trace at high freq. (3 messages)
PCBA Storage conditions? (1 message)
PE: PCB Inspection (7 messages)
plated thru hole solder fill (2 messages)
Plating Thieving (1 message)
Prefag 3B (2 messages)
PROCESS/DESIGN GUIDELINES FOR STENCILS (5 messages)
PSGA (1 message)
Pull Test for Glue Process (3 messages)
PWB minimum thickness and bend radius (4 messages)
PWB: Flex Circuit Testing: (see TM-650 m2.4.3.1) (1 message)
PWB: Flex Circuit Testing: Looking for Flexural Fatigue Tester for flex circuit materials (see TM-650 m2.4.3.1) (1 message)
Quad feeder repairs (1 message)
Quad feeders (1 message)
question about pre-heat & SIR (6 messages)
Question about Zestron (4 messages)
Question regarding Immersion White Tin (9 messages)
R: [TN] info about creepage distance (1 message)
RCC Foil Time-To-Delam Testing (3 messages)
Reference Source for Design (2 messages)
Reflective AOI systems (2 messages)
Reflow Oven Causing Bridging??? (4 messages)
Reliability Prediction Methods (7 messages)
Removal from automatic notices (1 message)
Repeted : MIL question (3 messages)
Request for Adhesive Information or Assistance (2 messages)
Request for info. (3 messages)
Resistor termination disappearing (5 messages)
Saponifiers and safety (7 messages)
Scale Flow Test - Question (5 messages)
Scaling on PBGA Balls after reflow. (4 messages)
SHOCK TESTING (2 messages)
Short on 098-0114-002 Fabs. (1 message)
sign off technet (1 message)
Silver migration (6 messages)
Silver migration articles (3 messages)
Single sided PWB (4 messages)
SIR test question... (1 message)
SMT Components (1 message)
SMT Reels Issues. (5 messages)
SNEC meeting (1 message)
Solder ball test (1 message)
Solder Fill (5 messages)
Solder Mask & ENIG (1 message)
Solder on gold finger (1 message)
Solder pot temp. (2 messages)
Solder Touch-up of probe marks (3 messages)
SolderMask SIRPI (2 messages)
SOLVENT's OCCUPATIONAL SAFETY (3 messages)
Stencil Guidelines (1 message)
still confused (28 messages)
stretch and shrinkage of bare boards (3 messages)
Stripper Chemistries (4 messages)
Surface Mount Equipment (3 messages)
Surface Roughness Measurement (3 messages)
Symantec (Norton Anti-virus) Provides Fix Tool for Fast-spreading VBS.STAGES.A Worm (1 message)
Ta: wirebonding and EFO (2 messages)
TechNet Digest - 28 Jun 2000 to 29 Jun 2000 - Special issue (#2000-406) (1 message)
Termination/Soldering Combination (4 messages)
Tg (4 messages)
Thermal Profiling (5 messages)
Thermal shock profile (4 messages)
This is a reminder that all IPC e-mail forums will be down for approximately two hours between 2:00 (1 message)
To be Lead-Free (1 message)
To X-ray or Not to X-ray. (10 messages)
Tombstoning and missing parts on 0805 Resistors (1 message)
Tooltronics Ultraclean II repair? (2 messages)
TVS vs Varistor (1 message)
unsubscribe (2 messages)
V-score depth (12 messages)
V-Score--stress (12 messages)
Variation in plating thickness on blind vias (3 messages)
Via-hole vs. component pin ??? (2 messages)
virus security (1 message)
Vision inspection systems recommendation (2 messages)
Warpage, Flatness and Surface Profile (4 messages)
Watermark (2 messages)
Wave solderable inserts for loose wires (3 messages)
Wave Soldering High Rel PCAs (3 messages)
Wave Soldering with 0402 component or smaller (2 messages)
Wavesoldering SMD chip resistor (4 messages)
Where O where did Vertical Conveyor Modules Go? (2 messages)
White Emersion Tin? (2 messages)
wirebonding EFO (3 messages)
Wrinkles in copper foil (3 messages)
X-outs (3 messages)
XENIX FILE SERVERS/Excellon DNC1.3 (1 message)
Zyphertronics's low melt solder rework alloy and rework station? (4 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

Chuck Brummer

Mon, 26 Jun 2000 11:22:38 -0700

52 lines

New Thread

"The Kobiyahshi Muru", or the no-win scenario...

Re: "The Kobiyahshi Muru", or the no-win scenario...

Stephen R. Gregory

Tue, 27 Jun 2000 13:43:00 EDT

84 lines

Re: "The Kobiyahshi Muru", or the no-win scenario...

Jerry Cupples

Tue, 27 Jun 2000 10:07:10 -0500

66 lines

Re: "The Kobiyahshi Muru", or the no-win scenario...

Kelly M. Schriver

Tue, 27 Jun 2000 06:31:40 -0500

86 lines

"The Kobiyahshi Muru", or the no-win scenario...

Stephen R. Gregory

Mon, 26 Jun 2000 20:58:53 EDT

46 lines

New Thread

0805 SMD capacitor bridging problem

Re: 0805 SMD capacitor bridging problem

Ryan Grant

Fri, 16 Jun 2000 15:39:53 -0600

74 lines

0805 SMD capacitor bridging problem

tangweidong

Fri, 16 Jun 2000 10:18:13 +0800

37 lines

New Thread

1206 Capacitors on 1812 Pads

Re: 1206 Capacitors on 1812 Pads

Ryan Grant

Fri, 30 Jun 2000 15:58:59 -0600

70 lines

Re: 1206 Capacitors on 1812 Pads

Stephen R. Gregory

Fri, 30 Jun 2000 17:51:35 EDT

56 lines

1206 Capacitors on 1812 Pads

Mike Lang

Fri, 30 Jun 2000 16:10:44 -0400

78 lines

New Thread

28 Ohm Airline Standard

Re: 28 Ohm Airline Standard

Steve Joy

Wed, 21 Jun 2000 18:00:40 -0700

51 lines

28 Ohm Airline Standard

Dewey Whittaker

Wed, 21 Jun 2000 13:15:31 -0700

68 lines

New Thread

3D Modeling

Re: 3D Modeling

Ingemar Hernefjord (EMW)

Mon, 5 Jun 2000 13:21:21 +0200

60 lines

Re: 3D Modeling

tangweidong

Sat, 3 Jun 2000 09:40:37 +0800

75 lines

Re: 3D Modeling

David Whalley

Thu, 1 Jun 2000 15:30:14 +0100

51 lines

Re: 3D Modeling

Richard Tilbrook

Thu, 1 Jun 2000 08:09:47 +0100

29 lines

New Thread

: CAD format

Re: : CAD format

Sullivan, William

Mon, 19 Jun 2000 16:31:31 -0400

66 lines

Re: : CAD format

Brent Alcorn

Mon, 19 Jun 2000 13:53:45 GMT

124 lines

Re: : CAD format

d. terstegge

Mon, 19 Jun 2000 15:27:46 +0200

65 lines

Re: : CAD format

Mike Wilson

Mon, 19 Jun 2000 09:15:49 -0400

63 lines

Re: : CAD format

Kuczynski Michael

Mon, 19 Jun 2000 09:04:52 -0400

36 lines

Re: : CAD format

Butterworth, Robert

Mon, 19 Jun 2000 08:19:41 -0500

68 lines

: CAD format

Poh Kong Hui

Mon, 22 May 2000 20:55:39 +0800

33 lines

New Thread

: Quantify Flux Residue

Re: : Quantify Flux Residue

Brian Ellis

Tue, 6 Jun 2000 09:19:21 +0300

79 lines

Re: : Quantify Flux Residue

Douglas Pauls

Mon, 5 Jun 2000 10:47:36 EDT

56 lines

: Quantify Flux Residue

Poh Kong Hui

Mon, 5 Jun 2000 21:38:17 +0800

40 lines

New Thread

: Tooltronics Ultraclean II repair?

Re: : Tooltronics Ultraclean II repair?

Ed Popielarski

Thu, 8 Jun 2000 12:13:47 -0700

122 lines

New Thread

<No subject>

<No subject>

Ketan Bhatt

Fri, 30 Jun 2000 19:21:13 +0530

39 lines

<No subject>

Rajesh Goutham

Fri, 23 Jun 2000 10:21:45 +0530

489 lines

<No subject>

Rajesh Goutham

Fri, 23 Jun 2000 09:46:36 +0530

37 lines

<No subject>

Brooks Bill

Tue, 20 Jun 2000 10:42:18 -0700

71 lines

<No subject>

Cory & Lise

Sun, 11 Jun 2000 22:55:41 -0400

48 lines

New Thread

About contamination testing

Re: About contamination testing

Brian Ellis

Tue, 27 Jun 2000 10:43:37 +0300

81 lines

About contamination testing

Kiiski Jarmo

Tue, 27 Jun 2000 09:03:59 +0300

30 lines

New Thread

About rework technology

Re: About rework technology

Mel Parrish

Mon, 5 Jun 2000 08:17:10 -0400

94 lines

Re: About rework technology

d. terstegge

Mon, 5 Jun 2000 13:59:58 +0200

58 lines

About rework technology

liuchangkang

Mon, 5 Jun 2000 17:49:44 +0800

30 lines

New Thread

ADMIN REPLY: [TN] To be Lead-Free

Re: ADMIN REPLY: [TN] To be Lead-Free

Paul Klasek

Tue, 13 Jun 2000 09:35:59 +1000

80 lines

ADMIN REPLY: [TN] To be Lead-Free

Jack Crawford

Mon, 12 Jun 2000 18:18:06 -0500

61 lines

New Thread

Ag on Ni - effect of baking

Re: Ag on Ni - effect of baking

Richard Tilbrook

Tue, 27 Jun 2000 08:38:17 +0100

31 lines

Re: Ag on Ni - effect of baking

Paul Klasek

Mon, 26 Jun 2000 10:40:04 +1000

103 lines

Re: Ag on Ni - effect of baking

Anil Kher

Fri, 23 Jun 2000 12:08:57 +0530

252 lines

Re: Ag on Ni - effect of baking

Creswick

Wed, 21 Jun 2000 22:11:31 -0500

119 lines

Re: Ag on Ni - effect of baking

Louis, Edwin @ CSE

Wed, 21 Jun 2000 16:24:02 -0400

128 lines

Re: Ag on Ni - effect of baking

Ryan Grant

Wed, 21 Jun 2000 13:35:41 -0600

106 lines

Re: Ag on Ni - effect of baking

d. terstegge

Wed, 21 Jun 2000 10:40:39 +0200

104 lines

Re: Ag on Ni - effect of baking

Brian Ellis

Wed, 21 Jun 2000 11:07:01 +0300

77 lines

Re: Ag on Ni - effect of baking

Richard Tilbrook

Wed, 21 Jun 2000 08:29:52 +0100

52 lines

Re: Ag on Ni - effect of baking

Paul Klasek

Wed, 21 Jun 2000 09:30:32 +1000

75 lines

Re: Ag on Ni - effect of baking

Richard Tilbrook

Tue, 20 Jun 2000 09:31:07 +0100

30 lines

New Thread

Ag on Ni - effect of baking in sun , related tech conten t

Re: Ag on Ni - effect of baking in sun , related tech conten t

Anil Kher

Fri, 23 Jun 2000 12:18:05 +0530

205 lines

Re: Ag on Ni - effect of baking in sun , related tech conten t

Werner Engelmaier

Thu, 22 Jun 2000 12:29:17 EDT

38 lines

Re: Ag on Ni - effect of baking in sun , related tech conten t

Paul Klasek

Thu, 22 Jun 2000 10:40:32 +1000

152 lines

New Thread

Air conditioning in assembly areas

Re: Air conditioning in assembly areas

Ken Bloomquist

Thu, 15 Jun 2000 09:33:51 -0700

60 lines

Air conditioning in assembly areas

Jean-Francois Bissonnette

Wed, 14 Jun 2000 17:46:35 -0400

32 lines

New Thread

aluminum bonded PCB

Re: aluminum bonded PCB

Ingemar Hernefjord (EMW)

Thu, 8 Jun 2000 11:36:49 +0200

62 lines

Re: aluminum bonded PCB

Phil Crepeau

Wed, 7 Jun 2000 11:57:59 -0700

64 lines

Re: aluminum bonded PCB

Sue Hedrick

Wed, 7 Jun 2000 13:44:28 -0400

73 lines

Re: aluminum bonded PCB

Brooks Bill

Wed, 7 Jun 2000 10:10:47 -0700

69 lines

Re: aluminum bonded PCB

Sullivan, William

Wed, 7 Jun 2000 13:07:48 -0400

68 lines

aluminum bonded PCB

Ed Holton

Wed, 7 Jun 2000 12:59:07 -0400

35 lines

New Thread

AMKOR engineering contact

AMKOR engineering contact

Michael Forrester

Mon, 12 Jun 2000 11:51:18 -0400

34 lines

New Thread

Any IPC specifications on more than 1 wires/leads per through-hole

Any IPC specifications on more than 1 wires/leads per through-hole

Francis Sun

Wed, 28 Jun 2000 16:49:58 -0400

34 lines

New Thread

Anyone wave soldering SMA (DO-214AC) diodes?

Re: Anyone wave soldering SMA (DO-214AC) diodes?

Alain Mathieu

Thu, 29 Jun 2000 12:00:51 -0400

66 lines

Anyone wave soldering SMA (DO-214AC) diodes?

Ross, Mark

Thu, 29 Jun 2000 09:36:58 -0400

32 lines

New Thread

Application Sides

Re: Application Sides

Douglas Pauls

Wed, 21 Jun 2000 09:21:51 EDT

39 lines

Application Sides

Jonathan A Noquil

Wed, 21 Jun 2000 14:40:21 +0800

34 lines

New Thread

Applied Voltage across the anode and cathode

Applied Voltage across the anode and cathode

Francis Lai

Thu, 15 Jun 2000 19:33:06 -0400

34 lines

New Thread

Au on Ni

Re: Au on Ni

Eric Yakobson

Fri, 23 Jun 2000 13:13:38 -0400

184 lines

New Thread

Au on Ni , back to cooking of Ag on Ni

Re: Au on Ni , back to cooking of Ag on Ni

Eric Yakobson

Mon, 26 Jun 2000 16:07:02 -0400

251 lines

Re: Au on Ni , back to cooking of Ag on Ni

Paul Klasek

Mon, 26 Jun 2000 08:27:59 +1000

236 lines

New Thread

Auto-insertion lead-to-hole ratios...

Re: Auto-insertion lead-to-hole ratios...

Jon Moore

Fri, 30 Jun 2000 14:58:35 EDT

43 lines

Re: Auto-insertion lead-to-hole ratios...

Gary Camac

Wed, 28 Jun 2000 07:38:58 -0500

122 lines

Re: Auto-insertion lead-to-hole ratios...

Stephen R. Gregory

Tue, 27 Jun 2000 19:49:46 EDT

56 lines

Re: Auto-insertion lead-to-hole ratios...

Richard Hamilton

Tue, 27 Jun 2000 16:21:12 -0700

78 lines

Re: Auto-insertion lead-to-hole ratios...

Richard Hamilton

Tue, 27 Jun 2000 16:19:02 -0700

112 lines

Re: Auto-insertion lead-to-hole ratios...

Stephen R. Gregory

Tue, 27 Jun 2000 19:08:15 EDT

58 lines

Re: Auto-insertion lead-to-hole ratios...

Brooks Bill

Tue, 27 Jun 2000 15:59:40 -0700

107 lines

Auto-insertion lead-to-hole ratios...

Stephen R. Gregory

Tue, 27 Jun 2000 18:40:21 EDT

56 lines

New Thread

AW: info about creepage distance

AW: info about creepage distance

Bernhard Wanner

Wed, 7 Jun 2000 19:19:11 +0200

90 lines

New Thread

AW: Mask coming off again...repair recomendations.

AW: Mask coming off again...repair recomendations.

Bernhard Wanner

Wed, 14 Jun 2000 18:47:59 +0200

38 lines

New Thread

Axial lead preparation

Re: Axial lead preparation

Phil Crepeau

Wed, 28 Jun 2000 07:06:53 -0700

36 lines

Re: Axial lead preparation

Douglas Pauls

Wed, 28 Jun 2000 09:41:45 EDT

98 lines

Re: Axial lead preparation

Brian Ellis

Wed, 28 Jun 2000 11:29:41 +0300

72 lines

Re: Axial lead preparation

Jason Larson, AScT

Tue, 27 Jun 2000 13:24:52 -0700

110 lines

Re: Axial lead preparation

Douglas Pauls

Tue, 27 Jun 2000 15:07:18 EDT

64 lines

Axial lead preparation

Jason Larson, AScT

Tue, 27 Jun 2000 11:06:35 -0700

37 lines

New Thread

Baking of boards

Re: Baking of boards

Kelly M. Schriver

Sun, 17 Jan 1999 07:04:58 -0600

65 lines

Re: Baking of boards

Brian Ellis

Sat, 10 Jun 2000 14:28:19 +0300

76 lines

Re: Baking of boards

Mike Fenner

Fri, 9 Jun 2000 18:00:07 +0100

53 lines

Re: Baking of boards

Brian Ellis

Fri, 9 Jun 2000 11:21:10 +0300

210 lines

Re: Baking of boards

Timothy Reeves

Thu, 8 Jun 2000 10:49:34 -0700

229 lines

Re: Baking of boards

Ingemar Hernefjord (EMW)

Tue, 6 Jun 2000 08:29:55 +0200

28 lines

Re: Baking of boards

Brian Ellis

Tue, 6 Jun 2000 09:34:52 +0300

133 lines

Re: Baking of boards

Hans Rohr

Mon, 5 Jun 2000 20:46:16 -0400

118 lines

Re: Baking of boards

Ryan Grant

Mon, 5 Jun 2000 08:41:09 -0600

150 lines

Re: Baking of boards

Ingemar Hernefjord (EMW)

Mon, 5 Jun 2000 13:51:58 +0200

138 lines

Re: Baking of boards

d. terstegge

Mon, 5 Jun 2000 09:08:35 +0200

129 lines

Re: Baking of boards

Kelly M. Schriver

Mon, 4 Jan 1999 20:50:06 -0600

117 lines

Re: Baking of boards

Mel Parrish

Fri, 2 Jun 2000 12:23:56 -0400

150 lines

Re: Baking of boards

David Hillman

Thu, 1 Jun 2000 14:18:25 -0500

84 lines

Re: Baking of boards

Richard Tilbrook

Fri, 2 Jun 2000 09:14:10 +0100

41 lines

Re: Baking of boards

Brian Ellis

Fri, 2 Jun 2000 09:15:53 +0300

90 lines

Re: Baking of boards

Timothy Reeves

Thu, 1 Jun 2000 11:30:12 -0700

70 lines

Re: Baking of boards

Ryan Grant

Thu, 1 Jun 2000 08:50:25 -0600

103 lines

Re: Baking of boards

Brian Ellis

Thu, 1 Jun 2000 17:54:00 +0300

51 lines

Re: Baking of boards

Dieselberg, Ron

Thu, 1 Jun 2000 09:44:12 -0400

57 lines

Re: Baking of boards

Douglas Pauls

Thu, 1 Jun 2000 09:05:20 EDT

28 lines

Re: Baking of boards

Lee Whiteman

Thu, 1 Jun 2000 08:59:37 -0400

89 lines

Re: Baking of boards

Kiiski Jarmo

Thu, 1 Jun 2000 13:44:52 +0300

92 lines

Re: Baking of boards

Kiiski Jarmo

Thu, 1 Jun 2000 12:42:24 +0300

69 lines

Re: Baking of boards

Brian Ellis

Thu, 1 Jun 2000 12:07:41 +0300

64 lines

Baking of boards

Martin Christie

Thu, 1 Jun 2000 09:48:00 +0100

39 lines

New Thread

BeCu with bright tin finish solderability

Re: BeCu with bright tin finish solderability

Phil Nutting

Tue, 13 Jun 2000 16:54:42 -0400

84 lines

Re: BeCu with bright tin finish solderability

Werner Engelmaier

Tue, 13 Jun 2000 16:24:40 EDT

29 lines

BeCu with bright tin finish solderability

Phil Bavaro

Tue, 13 Jun 2000 10:46:42 -0700

43 lines

New Thread

BGA application

Re: BGA application

David Hillman

Thu, 1 Jun 2000 10:05:03 -0500

61 lines

BGA application

Bill Robinson

Thu, 1 Jun 2000 08:18:27 -0500

33 lines

New Thread

BGA Design and CTE Mismatch

Re: BGA Design and CTE Mismatch

Werner Engelmaier

Thu, 15 Jun 2000 22:14:12 EDT

36 lines

BGA Design and CTE Mismatch

george

Thu, 15 Jun 2000 13:07:03 -0400

41 lines

New Thread

BGA inspection other than X-ray

Re: BGA inspection other than X-ray

Martin Christie

Thu, 22 Jun 2000 08:56:00 +0100

77 lines

BGA inspection other than X-ray

Mike Sewell

Wed, 21 Jun 2000 17:44:47 EDT

36 lines

New Thread

BGA pads size

Re: BGA pads size

Brooks Bill

Thu, 29 Jun 2000 10:41:16 -0700

146 lines

Re: BGA pads size

Ryan Grant

Thu, 29 Jun 2000 11:14:40 -0600

116 lines

Re: BGA pads size

Barbara Burcham

Thu, 29 Jun 2000 10:44:46 -0500

137 lines

Re: BGA pads size

Brooks Bill

Thu, 29 Jun 2000 08:26:05 -0700

104 lines

Re: BGA pads size

Ryan Grant

Thu, 29 Jun 2000 08:14:31 -0600

67 lines

BGA pads size

Stella Neyman

Wed, 28 Jun 2000 14:07:53 -0400

33 lines

New Thread

Black nickel barrier problem w/immersion Ni/Ag

Re: Black nickel barrier problem w/immersion Ni/Ag

Ingemar Hernefjord (EMW)

Mon, 5 Jun 2000 14:05:51 +0200

124 lines

Re: Black nickel barrier problem w/immersion Ni/Ag

Ryan Grant

Thu, 1 Jun 2000 08:30:04 -0600

98 lines

New Thread

blind via fill

blind via fill

Remi Charron

Wed, 14 Jun 2000 07:55:38 -0400

71 lines

Blind Via Fill

Remi Charron

Mon, 12 Jun 2000 13:34:15 -0400

69 lines

New Thread

Board cleaning

Re: Board cleaning

Charles J Wills

Sun, 18 Jun 2000 17:32:52 -0400

140 lines

Re: Board cleaning

Brian Ellis

Fri, 16 Jun 2000 17:48:55 +0300

118 lines

Re: Board cleaning

<Rudy Sedlak>

Fri, 16 Jun 2000 09:58:31 EDT

39 lines

Re: Board cleaning

Lee Whiteman

Fri, 16 Jun 2000 09:21:52 -0400

95 lines

Re: Board cleaning

Bev Christian

Fri, 16 Jun 2000 09:00:50 -0400

109 lines

Re: Board cleaning

Brian Ellis

Fri, 16 Jun 2000 15:11:38 +0300

73 lines

Board cleaning

Franklin D Asbell

Fri, 16 Jun 2000 05:57:29 -0500

42 lines

Board cleaning

Jean-Francois Bissonnette

Wed, 14 Jun 2000 11:15:42 -0400

48 lines

New Thread

Board thickness

Board thickness

Cara.Startek

Wed, 14 Jun 2000 17:45:26 -0400

29 lines

New Thread

Board Vender Date Code/Logo Search

Re: Board Vender Date Code/Logo Search

George Gerberick

Mon, 12 Jun 2000 11:36:50 -0700

44 lines

Board Vender Date Code/Logo Search

Bellamy, Dennis W. UTRC

Mon, 12 Jun 2000 13:03:20 -0400

76 lines

New Thread

Boards Cleaning II

Re: Boards Cleaning II

Mike Fenner

Fri, 16 Jun 2000 10:05:07 +0100

81 lines

Re: Boards Cleaning II

Jean-Francois Bissonnette

Wed, 14 Jun 2000 13:05:09 -0400

110 lines

Re: Boards Cleaning II

Alain Savard

Wed, 14 Jun 2000 12:16:03 -0400

75 lines

Boards Cleaning II

Jean-Francois Bissonnette

Wed, 14 Jun 2000 11:21:04 -0400

113 lines

New Thread

Burn in board?

Re: Burn in board?

Jean-Francois Bissonnette

Tue, 20 Jun 2000 08:20:48 -0400

68 lines

Burn in board?

Song In-myung

Tue, 20 Jun 2000 17:00:18 +0900

33 lines

New Thread

CADSTAR Placement file

Re: CADSTAR Placement file

Hybiske, Tom

Thu, 29 Jun 2000 08:44:31 -0400

161 lines

Re: CADSTAR Placement file

Cal Driscoll

Thu, 29 Jun 2000 07:26:21 -0400

82 lines

CADSTAR Placement file

Mark Holmes

Thu, 29 Jun 2000 11:07:34 +0100

43 lines

New Thread

Capacitor issues (resistors do it too!)

Re: Capacitor issues (resistors do it too!)

Ingemar Hernefjord (EMW)

Thu, 15 Jun 2000 13:44:39 +0200

96 lines

Re: Capacitor issues (resistors do it too!)

David Whalley

Tue, 13 Jun 2000 13:57:35 +0100

75 lines

New Thread

Capacitor issues...

Re: Capacitor issues...

Stephen R. Gregory

Wed, 14 Jun 2000 09:05:31 EDT

37 lines

Re: Capacitor issues...

Ingemar Hernefjord (EMW)

Tue, 13 Jun 2000 12:21:55 +0200

71 lines

New Thread

Change in Dielectric over Temp

Re: Change in Dielectric over Temp

Lou Hart

Wed, 21 Jun 2000 16:32:36 -0400

67 lines

Change in Dielectric over Temp

Bill Beale

Wed, 21 Jun 2000 10:14:24 -0700

46 lines

New Thread

Chip backside metal

Re: Chip backside metal

Ingemar Hernefjord (EMW)

Tue, 13 Jun 2000 11:30:46 +0200

92 lines

Re: Chip backside metal

Creswick

Sun, 11 Jun 2000 07:32:20 -0500

79 lines

Chip backside metal

Ingemar Hernefjord (EMW)

Wed, 7 Jun 2000 15:49:13 +0200

26 lines

New Thread

Chip backside metal (poor thermal conductivity of polyme rs)

Re: Chip backside metal (poor thermal conductivity of polyme rs)

Ingemar Hernefjord (EMW)

Tue, 13 Jun 2000 12:05:03 +0200

84 lines

New Thread

Chip backside metal (poor thermal conductivity of polymers)

Re: Chip backside metal (poor thermal conductivity of polymers)

David Whalley

Mon, 12 Jun 2000 16:30:53 +0100

55 lines

New Thread

Chloride - Chlorine

Re: Chloride - Chlorine

Kiiski Jarmo

Mon, 19 Jun 2000 12:09:29 +0300

266 lines

Re: Chloride - Chlorine

Brian Ellis

Mon, 19 Jun 2000 10:56:14 +0300

190 lines

Re: Chloride - Chlorine

Kiiski Jarmo

Mon, 19 Jun 2000 09:54:41 +0300

150 lines

Re: Chloride - Chlorine

Brian Ellis

Sat, 17 Jun 2000 11:11:46 +0300

83 lines

Re: Chloride - Chlorine

Timothy Reeves

Fri, 16 Jun 2000 11:43:26 -0700

46 lines

Chloride - Chlorine

Franklin D Asbell

Fri, 16 Jun 2000 12:48:25 -0500

35 lines

New Thread

Cleanroom

Re: Cleanroom

Gerry Cooper

Fri, 16 Jun 2000 09:24:43 -0400

36 lines

Cleanroom

Ralph Golnick

Fri, 16 Jun 2000 07:36:10 -0500

26 lines

New Thread

component analysis lab

component analysis lab

Ralph Vaughan

Fri, 9 Jun 2000 17:25:27 -0400

41 lines

New Thread

component Hole dia v/s lead dia for better solder fillet

Re: component Hole dia v/s lead dia for better solder fillet

Paul Fly

Fri, 16 Jun 2000 14:33:27 -0400

103 lines

Re: component Hole dia v/s lead dia for better solder fillet

Richard Hamilton

Fri, 16 Jun 2000 12:09:10 -0700

87 lines

Re: component Hole dia v/s lead dia for better solder fillet

Stephen R. Gregory

Fri, 16 Jun 2000 14:57:58 EDT

52 lines

component Hole dia v/s lead dia for better solder fillet

Ken Patel

Fri, 16 Jun 2000 11:01:33 -0700

48 lines

New Thread

Component packages

Re: Component packages

Brooks Bill

Thu, 8 Jun 2000 09:12:23 -0700

82 lines

Re: Component packages

Stephen R. Gregory

Thu, 8 Jun 2000 08:47:52 EDT

62 lines

Re: Component packages

McGlaughlin, Jeffrey A

Thu, 8 Jun 2000 08:30:42 -0400

80 lines

Re: Component packages

Dick Thompson/MKT/HQ/KEMET/US

Thu, 8 Jun 2000 08:35:54 -0400

87 lines

Component packages

Tempea, Ioan

Thu, 8 Jun 2000 08:02:52 -0400

39 lines

New Thread

Conclusion of confusion

Conclusion of confusion

Paul Klasek

Fri, 9 Jun 2000 12:25:13 +1000

406 lines

New Thread

DFM Statement

Re: DFM Statement

pratap

Thu, 1 Jun 2000 13:35:42 -0700

193 lines

DFM Statement

Barry Gallegos

Thu, 1 Jun 2000 10:57:45 -0600

152 lines

New Thread

Digital Camera

Digital Camera

Jean-Francois Bissonnette

Mon, 5 Jun 2000 15:44:39 -0400

40 lines

New Thread

Direct Metalization

Re: Direct Metalization

Howieson, Rick

Fri, 16 Jun 2000 08:08:00 -0600

62 lines

Direct Metalization

Ronald Yanuszewski

Thu, 15 Jun 2000 19:44:35 -0400

68 lines

New Thread

Direct Metalization of LPI

Re: Direct Metalization of LPI

<Dennis Fritz>

Thu, 15 Jun 2000 13:23:38 EDT

39 lines

Re: Direct Metalization of LPI

Mark Mazzoli

Thu, 15 Jun 2000 09:51:07 -0700

45 lines

Direct Metalization of LPI

<>

Thu, 15 Jun 2000 12:01:54 EDT

31 lines

New Thread

Disposal of FR-4 scrap and offcuts

Re: Disposal of FR-4 scrap and offcuts

Brian Ellis

Wed, 28 Jun 2000 11:34:52 +0300

70 lines

Re: Disposal of FR-4 scrap and offcuts

Stoppel, Robert

Tue, 27 Jun 2000 16:25:40 -0600

73 lines

Re: Disposal of FR-4 scrap and offcuts

Tom Martin

Tue, 27 Jun 2000 18:04:54 -0400

48 lines

Re: Disposal of FR-4 scrap and offcuts

Brian Ellis

Tue, 27 Jun 2000 13:07:15 +0300

50 lines

Disposal of FR-4 scrap and offcuts

Anil Kher

Tue, 27 Jun 2000 09:23:43 +0530

90 lines

New Thread

Documents for mil-std-105D or E ???

Re: Documents for mil-std-105D or E ???

Tony DiMauro

Fri, 23 Jun 2000 08:21:26 -0700

90 lines

Documents for mil-std-105D or E ???

Denis Seguin

Fri, 23 Jun 2000 10:26:33 -0400

44 lines

New Thread

DOD Designs...

Re: DOD Designs...

McGlaughlin, Jeffrey A

Thu, 29 Jun 2000 11:37:27 -0400

123 lines

Re: DOD Designs...

Ryan Grant

Wed, 28 Jun 2000 14:01:52 -0600

193 lines

Re: DOD Designs...

Hinners Hans Civ WRALC/LYPME

Wed, 28 Jun 2000 16:08:02 -0400

165 lines

Re: DOD Designs...

Stephen R. Gregory

Wed, 28 Jun 2000 15:59:46 EDT

64 lines

Re: DOD Designs...

Beerman, Dennis

Wed, 28 Jun 2000 14:02:01 -0500

144 lines

Re: DOD Designs...

Hinners Hans Civ WRALC/LYPME

Wed, 28 Jun 2000 19:40:08 +0100

83 lines

Re: DOD Designs...

Collins, Graham

Wed, 28 Jun 2000 11:20:53 -0300

119 lines

Re: DOD Designs...

Douglas Pauls

Wed, 28 Jun 2000 09:57:09 EDT

82 lines

Re: DOD Designs...

May William D (Dean) CNIN

Wed, 28 Jun 2000 08:29:38 -0500

77 lines

Re: DOD Designs...

Beerman, Dennis

Wed, 28 Jun 2000 07:47:47 -0500

65 lines

Re: DOD Designs...

Tom Kropski

Wed, 28 Jun 2000 08:19:27 -0400

77 lines

DOD Designs...

Stephen R. Gregory

Tue, 27 Jun 2000 22:43:33 EDT

35 lines

New Thread

Double sided boards using only

Re: Double sided boards using only

Mike Lang

Fri, 16 Jun 2000 14:05:55 -0400

193 lines

Re: Double sided boards using only

Tom Burek

Thu, 15 Jun 2000 13:48:23 -0400

94 lines

New Thread

Double sided boards using only one stencil

Re: Double sided boards using only one stencil

DeLorenzo, Stacey

Fri, 16 Jun 2000 11:37:07 -0400

61 lines

Re: Double sided boards using only one stencil

Stephen R. Gregory

Wed, 14 Jun 2000 18:07:52 EDT

52 lines

Double sided boards using only one stencil

West, Jim

Wed, 14 Jun 2000 16:10:00 -0400

35 lines

New Thread

Drill bits & router bits

Drill bits & router bits

Harvey Grossman

Thu, 22 Jun 2000 07:57:16 EDT

28 lines

New Thread

Dual Gauge Lead Frame Supplier

Dual Gauge Lead Frame Supplier

Jonathan A Noquil

Fri, 9 Jun 2000 17:02:40 +0800

37 lines

New Thread

Dual Gauge Lead Frames

Dual Gauge Lead Frames

Jonathan A Noquil

Thu, 15 Jun 2000 14:43:31 +0800

36 lines

New Thread

Duplicated messages?

Duplicated messages?

Matthew Lamkin

Thu, 1 Jun 2000 08:23:13 +0100

30 lines

New Thread

E-mail forum break in service 30 June

E-mail forum break in service 30 June

Keach Sasamori

Mon, 26 Jun 2000 08:49:02 -0500

44 lines

New Thread

Electrical testing of bare board

Re: Electrical testing of bare board

Brian Ellis

Fri, 23 Jun 2000 12:17:38 +0300

132 lines

Re: Electrical testing of bare board

Le Dai Tri

Fri, 23 Jun 2000 14:21:41 +0700

103 lines

Re: Electrical testing of bare board

Brian Ellis

Thu, 22 Jun 2000 14:08:58 +0300

62 lines

Electrical testing of bare board

Howard Lin

Thu, 22 Jun 2000 16:54:26 +0800

32 lines

New Thread

Electroplating reference book

Re: Electroplating reference book

Ingemar Hernefjord (EMW)

Fri, 9 Jun 2000 17:34:04 +0200

60 lines

Electroplating reference book

Brown, Matthew

Fri, 9 Jun 2000 09:34:00 -0400

33 lines

New Thread

Environmental Alert: Etchant Recycling in California

Environmental Alert: Etchant Recycling in California

David Bergman

Thu, 1 Jun 2000 16:57:17 -0500

161 lines

New Thread

EOS-models for bi/unipolar semis

Re: EOS-models for bi/unipolar semis

Ingemar Hernefjord (EMW)

Mon, 26 Jun 2000 11:37:59 +0200

90 lines

Re: EOS-models for bi/unipolar semis

Ed Hare

Wed, 21 Jun 2000 09:13:23 -0700

65 lines

EOS-models for bi/unipolar semis

Ingemar Hernefjord (EMW)

Wed, 21 Jun 2000 15:53:17 +0200

31 lines

New Thread

ESD Coats

Re: ESD Coats

Ryan Grant

Fri, 16 Jun 2000 15:10:10 -0600

131 lines

Re: ESD Coats

Phillips, Peter (NM05)

Thu, 15 Jun 2000 11:17:33 -0500

91 lines

Re: ESD Coats

Kelly M. Schriver

Sun, 17 Jan 1999 07:24:04 -0600

84 lines

Re: ESD Coats

Gary Camac

Wed, 14 Jun 2000 15:55:02 -0500

114 lines

Re: ESD Coats

Paul Signorelli

Wed, 14 Jun 2000 14:05:01 -0500

44 lines

ESD Coats

Bob Perkins

Wed, 14 Jun 2000 10:57:13 -0700

32 lines

Re: ESD Coats

Paul Signorelli

Wed, 14 Jun 2000 10:25:31 -0500

36 lines

Re: ESD Coats

Jean-Francois Bissonnette

Wed, 14 Jun 2000 08:24:38 -0400

79 lines

Re: ESD Coats

Nancy Trumbull

Wed, 14 Jun 2000 07:40:05 -0400

68 lines

Re: ESD Coats

Dieselberg, Ron

Wed, 14 Jun 2000 07:34:12 -0400

79 lines

Re: ESD Coats

Ryan Grant

Tue, 13 Jun 2000 16:51:48 -0600

140 lines

Re: ESD Coats

Barry Gallegos

Tue, 13 Jun 2000 16:31:39 -0600

106 lines

Re: ESD Coats

Blomberg, Rainer (FL51)

Tue, 13 Jun 2000 17:16:47 -0400

77 lines

Re: ESD Coats

Ken Bloomquist

Tue, 13 Jun 2000 13:57:19 -0700

36 lines

Re: ESD Coats

Phillips, Peter (NM05)

Tue, 13 Jun 2000 14:50:04 -0500

112 lines

Re: ESD Coats

Tim Devaul

Tue, 13 Jun 2000 14:54:35 -0500

84 lines

ESD Coats

Ken Bloomquist

Tue, 13 Jun 2000 12:18:54 -0700

41 lines

New Thread

ESD Lab coats

Re: ESD Lab coats

Kane, Joseph

Thu, 15 Jun 2000 10:42:24 -0400

74 lines

ESD Lab coats

Rob Williams

Wed, 14 Jun 2000 13:05:27 -0500

27 lines

ESD Lab coats

Lou Hart

Wed, 14 Jun 2000 10:09:45 -0400

40 lines

New Thread

ESD requirements at higher temperatures.

Re: ESD requirements at higher temperatures.

Cash, Alan

Wed, 28 Jun 2000 09:20:05 -0400

68 lines

ESD requirements at higher temperatures.

Byrne James (RBAU-KE/MGE3)

Wed, 28 Jun 2000 09:35:27 +1000

40 lines

New Thread

Etchant Recycling Situation

Etchant Recycling Situation

Phil Culpovich

Mon, 26 Jun 2000 18:23:20 EDT

50 lines

New Thread

Exchange capacitors

Exchange capacitors

Jurgen Kruger

Sat, 10 Jun 2000 09:34:54 +0200

112 lines

New Thread

Failure Rate for Reflow Process

Re: Failure Rate for Reflow Process

Ryan Grant

Fri, 9 Jun 2000 11:23:19 -0600

73 lines

Failure Rate for Reflow Process

Becerra Alejandro

Fri, 9 Jun 2000 09:17:15 -0500

37 lines

New Thread

Filled via holes

Re: Filled via holes

Stephen R. Gregory

Thu, 29 Jun 2000 21:44:20 EDT

58 lines

Re: Filled via holes

Werner Engelmaier

Thu, 29 Jun 2000 21:04:40 EDT

31 lines

Re: Filled via holes

Werner Engelmaier

Thu, 29 Jun 2000 21:04:32 EDT

36 lines

Re: Filled via holes

Ruby Hazen

Thu, 29 Jun 2000 09:21:05 PDT

85 lines

Re: Filled via holes

Howieson, Rick

Thu, 29 Jun 2000 08:47:36 -0600

76 lines

Re: Filled via holes

Werner Engelmaier

Thu, 29 Jun 2000 09:17:25 EDT

47 lines

Filled via holes

Ruby Hazen

Wed, 28 Jun 2000 11:15:22 PDT

34 lines

New Thread

Fire protection and electronic parts

Fire protection and electronic parts

Christophe CROCOMBETTE

Wed, 28 Jun 2000 10:36:02 +0200

43 lines

New Thread

FITS

FITS

Ruby Hazen

Wed, 14 Jun 2000 15:50:43 PDT

28 lines

New Thread

Flip chip

Re: Flip chip

Craig Hillman

Mon, 19 Jun 2000 16:49:11 -0400

79 lines

Re: Flip chip

Paul Fly

Mon, 19 Jun 2000 16:10:38 -0400

81 lines

Flip chip

Terveen, James @ NARDAEAST

Mon, 19 Jun 2000 15:20:27 -0400

27 lines

New Thread

Flip chip underfill delamination

Re: Flip chip underfill delamination

Bev Christian

Wed, 28 Jun 2000 07:50:25 -0400

76 lines

Flip chip underfill delamination

LI YUAN

Tue, 27 Jun 2000 15:32:39 -0600

31 lines

New Thread

Fluorinert FC-43

Fluorinert FC-43

Edward J. Valentine

Tue, 13 Jun 2000 09:29:28 -0400

38 lines

New Thread

FR4

Re: FR4

Shirley Xiao

Fri, 23 Jun 2000 00:52:11 -0700

88 lines

Re: FR4

Jonathan A Noquil

Fri, 23 Jun 2000 09:01:40 +0800

39 lines

New Thread

FR4 Shortages - is there a problem?

Re: FR4 Shortages - is there a problem?

Paul Klasek

Fri, 23 Jun 2000 11:42:51 +1000

78 lines

Re: FR4 Shortages - is there a problem?

joyce

Thu, 22 Jun 2000 21:39:08 -0400

83 lines

Re: FR4 Shortages - is there a problem?

Stephen R. Gregory

Thu, 22 Jun 2000 21:10:38 EDT

63 lines

FR4 Shortages - is there a problem?

PCBA

Fri, 23 Jun 2000 08:48:34 +0800

37 lines

New Thread

FW: Do NOT OPEN Life STAGES

FW: Do NOT OPEN Life STAGES

Cal Driscoll

Tue, 20 Jun 2000 08:44:49 -0400

179 lines

New Thread

FW: [TN] Auto-insertion lead-to-hole ratios...

FW: [TN] Auto-insertion lead-to-hole ratios...

Brooks Bill

Tue, 27 Jun 2000 16:17:35 -0700

84 lines

New Thread

FW: [TN] Other visual tests under a BGA possible?

FW: [TN] Other visual tests under a BGA possible?

Thorup, John

Mon, 5 Jun 2000 12:23:53 -0700

90 lines

New Thread

Fwd: RE: [TN] Immersion White Tin

Fwd: RE: [TN] Immersion White Tin

<>

Wed, 7 Jun 2000 21:17:02 -0700

275 lines

New Thread

GaAs Cracks

Re: GaAs Cracks

Ingemar Hernefjord (EMW)

Tue, 13 Jun 2000 10:52:09 +0200

75 lines

Re: GaAs Cracks

Mike Fenner

Tue, 13 Jun 2000 06:31:54 +0100

58 lines

Re: GaAs Cracks

Creswick

Mon, 12 Jun 2000 18:57:39 -0500

85 lines

GaAs Cracks

jong s kadesch

Mon, 12 Jun 2000 09:37:57 -0400

41 lines

New Thread

Generic question about Flux types...

Re: Generic question about Flux types...

Collins, Graham

Mon, 19 Jun 2000 10:37:02 -0300

88 lines

Re: Generic question about Flux types...

Brian Ellis

Sun, 18 Jun 2000 17:10:00 +0300

67 lines

Re: Generic question about Flux types...

<>

Sun, 18 Jun 2000 09:36:16 -0400

40 lines

Re: Generic question about Flux types...

Kasprzak, Bill (esd) USX

Sat, 17 Jun 2000 06:51:52 -0400

92 lines

Re: Generic question about Flux types...

Brian Ellis

Sat, 17 Jun 2000 10:32:18 +0300

126 lines

Re: Generic question about Flux types...

Mike Fenner

Sat, 17 Jun 2000 00:17:11 +0100

76 lines

Re: Generic question about Flux types...

Harold Papazian

Fri, 16 Jun 2000 16:03:23 -0500

74 lines

Re: Generic question about Flux types...

Jerry Cupples

Fri, 16 Jun 2000 15:24:33 -0500

47 lines

Generic question about Flux types...

Stephen R. Gregory

Fri, 16 Jun 2000 15:33:47 EDT

36 lines

New Thread

Gold over Copper?!?

Re: Gold over Copper?!?

Dieselberg, Ron

Wed, 14 Jun 2000 11:05:24 -0400

95 lines

Re: Gold over Copper?!?

Frank Davies

Wed, 14 Jun 2000 13:50:51 +0100

65 lines

Re: Gold over Copper?!?

Gerry Cooper

Wed, 14 Jun 2000 07:39:10 -0400

28 lines

Re: Gold over Copper?!?

Alain Savard

Wed, 14 Jun 2000 07:50:47 -0400

64 lines

Re: Gold over Copper?!?

Paul Klasek

Wed, 14 Jun 2000 11:45:42 +1000

150 lines

Re: Gold over Copper?!?

Brooks Bill

Tue, 13 Jun 2000 16:07:46 -0700

111 lines

Re: Gold over Copper?!?

Brooks Bill

Tue, 13 Jun 2000 15:59:40 -0700

67 lines

Re: Gold over Copper?!?

Ryan Grant

Tue, 13 Jun 2000 16:48:52 -0600

81 lines

Re: Gold over Copper?!?

<Rudy Sedlak>

Tue, 13 Jun 2000 18:37:04 EDT

35 lines

Re: Gold over Copper?!?

Brooks Bill

Tue, 13 Jun 2000 15:36:01 -0700

74 lines

Gold over Copper?!?

Roger M. Stoops

Tue, 13 Jun 2000 22:19:29 +0000

44 lines

New Thread

Gold over Copper?!? (II)

Re: Gold over Copper?!? (II)

Geoff Layhe

Wed, 14 Jun 2000 10:46:26 +0100

73 lines

Re: Gold over Copper?!? (II)

<Rudy Sedlak>

Tue, 13 Jun 2000 23:22:47 EDT

36 lines

New Thread

half-a-hole

Re: half-a-hole

To My E-Mail Address

Tue, 6 Jun 2000 18:18:57 EDT

36 lines

Re: half-a-hole

Yehuda Weisz

Mon, 5 Jun 2000 23:14:32 -0000

67 lines

Re: half-a-hole

Roger M. Stoops

Fri, 2 Jun 2000 13:12:09 +0000

102 lines

half-a-hole

Brian Gaynor

Fri, 2 Jun 2000 10:29:38 +0100

31 lines

New Thread

High Temperature PWB

Re: High Temperature PWB

David Whalley

Mon, 19 Jun 2000 10:34:15 +0100

55 lines

Re: High Temperature PWB

Larry Tawyea

Sat, 17 Jun 2000 10:33:53 EDT

48 lines

Re: High Temperature PWB

Misner, Bruce

Sat, 17 Jun 2000 08:55:35 -0500

66 lines

Re: High Temperature PWB

Stephen R. Gregory

Fri, 16 Jun 2000 19:40:22 EDT

61 lines

High Temperature PWB

Ruby Hazen

Fri, 16 Jun 2000 15:52:04 PDT

33 lines

New Thread

ic-packages

Re: ic-packages

Mike Fenner

Fri, 9 Jun 2000 18:10:56 +0100

44 lines

ic-packages

Lon Weffers

Fri, 9 Jun 2000 11:09:41 +0200

33 lines

New Thread

Immersion Silver/Tin PCB Supplier in Asia

Re: Immersion Silver/Tin PCB Supplier in Asia

Joseph Ng

Tue, 6 Jun 2000 12:47:28 +0800

84 lines

New Thread

Immersion Tin Suppliers

Re: Immersion Tin Suppliers

David Hillman

Fri, 30 Jun 2000 07:56:24 -0500

79 lines

Re: Immersion Tin Suppliers

Kelly M. Schriver

Sat, 24 Jun 2000 06:57:47 -0500

89 lines

Immersion Tin Suppliers

McMonagle, Mike

Fri, 23 Jun 2000 10:39:40 -0400

51 lines

New Thread

Immersion White Tin

Re: Immersion White Tin

Wenger, George M (George)

Thu, 8 Jun 2000 08:32:41 -0400

158 lines

Re: Immersion White Tin

Phil Crepeau

Wed, 7 Jun 2000 13:31:37 -0700

113 lines

Re: Immersion White Tin

Wenger, George M (George)

Wed, 7 Jun 2000 13:49:19 -0400

84 lines

Re: Immersion White Tin

Darrel Therriault

Wed, 7 Jun 2000 08:15:43 -0700

39 lines

Re: Immersion White Tin

Wenger, George M (George)

Wed, 7 Jun 2000 10:39:57 -0400

190 lines

Re: Immersion White Tin

Ryan Grant

Mon, 5 Jun 2000 13:38:12 -0600

86 lines

Re: Immersion White Tin

<>

Thu, 1 Jun 2000 14:45:19 -0700

92 lines

Re: Immersion White Tin

Brooks Bill

Thu, 1 Jun 2000 13:38:45 -0700

69 lines

Immersion White Tin

<>

Thu, 1 Jun 2000 12:18:23 -0700

41 lines

New Thread

Inductor measuring equipment...

Re: Inductor measuring equipment...

KK Chin

Tue, 20 Jun 2000 11:38:22 -0700

84 lines

Re: Inductor measuring equipment...

Paul Klasek

Tue, 20 Jun 2000 13:33:13 +1000

69 lines

Inductor measuring equipment...

Stephen R. Gregory

Mon, 19 Jun 2000 21:13:50 EDT

35 lines

New Thread

info about creepage distance

Re: info about creepage distance

Paul Klasek

Tue, 13 Jun 2000 16:14:28 +1000

104 lines

Re: info about creepage distance

Phil Dutton

Tue, 13 Jun 2000 12:11:54 +0930

68 lines

Re: info about creepage distance

Paul Klasek

Tue, 13 Jun 2000 11:25:30 +1000

139 lines

Re: info about creepage distance

Paul Klasek

Fri, 9 Jun 2000 16:07:00 +1000

119 lines

Re: info about creepage distance

Phil Dutton

Fri, 9 Jun 2000 13:37:58 +0930

94 lines

Re: info about creepage distance

Jerry Mosur

Wed, 7 Jun 2000 10:35:24 -0400

194 lines

Re: info about creepage distance

Brooks Bill

Wed, 7 Jun 2000 09:19:50 -0700

83 lines

info about creepage distance

Radaelli Roberto

Wed, 7 Jun 2000 17:17:28 +0200

116 lines

New Thread

Interpretation of JEDEC requirements

Re: Interpretation of JEDEC requirements

McGlaughlin, Jeffrey A

Wed, 21 Jun 2000 12:47:35 -0400

71 lines

Interpretation of JEDEC requirements

Craig Hillman

Wed, 21 Jun 2000 12:44:37 -0400

36 lines

New Thread

Intrusive Reflow

Re: Intrusive Reflow

d. terstegge

Tue, 6 Jun 2000 09:12:14 +0200

77 lines

Re: Intrusive Reflow

pratap

Mon, 5 Jun 2000 19:44:17 -0700

70 lines

Re: Intrusive Reflow

Ralph Garvin

Mon, 5 Jun 2000 16:38:40 -0500

76 lines

Intrusive Reflow

Rick Thompson

Mon, 5 Jun 2000 14:17:21 -0700

43 lines

New Thread

IPC designer certification - Paper Doll

Re: IPC designer certification - Paper Doll

Steve Kingdon

Fri, 16 Jun 2000 12:17:21 +1200

114 lines

Re: IPC designer certification - Paper Doll

Keel, Mike

Thu, 15 Jun 2000 17:01:57 -0700

87 lines

Re: IPC designer certification - Paper Doll

Brooks Bill

Thu, 15 Jun 2000 15:12:03 -0700

71 lines

IPC designer certification - Paper Doll

Craig Mcglinchy

Fri, 16 Jun 2000 09:50:45 +1200

39 lines

New Thread

IPC Listserv Up

IPC Listserv Up

Keach Sasamori

Fri, 30 Jun 2000 14:58:39 -0500

39 lines

New Thread

IPC Listserv will be down at 2:00 PM CDT

IPC Listserv will be down at 2:00 PM CDT

Keach Sasamori

Fri, 30 Jun 2000 13:46:37 -0500

31 lines

New Thread

IPC Roadmap Draft IV Available for Review and Comment

IPC Roadmap Draft IV Available for Review and Comment

Christopher Jorgensen

Fri, 30 Jun 2000 10:56:06 -0500

34 lines

New Thread

IPC test labs

Re: IPC test labs

Douglas Pauls

Mon, 5 Jun 2000 08:40:25 EDT

116 lines

Re: IPC test labs

Brian Ellis

Fri, 2 Jun 2000 17:26:21 +0300

253 lines

Re: IPC test labs

Cash, Alan

Fri, 2 Jun 2000 07:14:18 -0700

259 lines

Re: IPC test labs

Bev Christian

Fri, 2 Jun 2000 10:01:37 -0400

233 lines

Re: IPC test labs

Cara.Startek

Fri, 2 Jun 2000 09:31:22 -0400

163 lines

Re: IPC test labs

Douglas Pauls

Thu, 1 Jun 2000 17:30:48 EDT

77 lines

Re: IPC test labs

Bev Christian

Thu, 1 Jun 2000 14:51:44 -0400

101 lines

IPC test labs

Cara.Startek

Thu, 1 Jun 2000 12:52:14 -0400

42 lines

New Thread

IPC-1731 Available for Free Download

IPC-1731 Available for Free Download

Christopher Jorgensen

Tue, 27 Jun 2000 14:59:07 -0500

38 lines

New Thread

kgf/pcs unit?

Re: kgf/pcs unit?

=?euc-kr?B?uei9w8ivILTruK4gwPzA2iCx6MO1sPjA5cewwfq6uMH1xsA=?=

Wed, 7 Jun 2000 17:56:28 +0900

86 lines

Re: kgf/pcs unit?

Ingemar Hernefjord (EMW)

Mon, 5 Jun 2000 14:25:53 +0200

55 lines

Re: kgf/pcs unit?

Phil Crepeau

Thu, 1 Jun 2000 07:38:27 -0700

58 lines

kgf/pcs unit?

Kiiski Jarmo

Thu, 1 Jun 2000 13:33:28 +0300

30 lines

New Thread

Laminate condition

Re: Laminate condition

Denis J. Dionne

Tue, 13 Jun 2000 13:01:38 -0400

63 lines

Re: Laminate condition

Brian Ellis

Fri, 9 Jun 2000 20:39:45 +0300

116 lines

Re: Laminate condition

Nelson, John

Fri, 9 Jun 2000 09:21:35 -0400

192 lines

Re: Laminate condition

Brian Ellis

Fri, 9 Jun 2000 10:50:37 +0300

66 lines

Re: Laminate condition

Jean-Francois Bissonnette

Thu, 8 Jun 2000 17:37:42 -0400

723 lines

Re: Laminate condition

Hinners Hans Civ WRALC/LYPME

Thu, 8 Jun 2000 17:08:28 -0400

586 lines

Re: Laminate condition

Barmuta, Mike

Thu, 8 Jun 2000 14:06:59 -0700

94 lines

Re: Laminate condition

Mark Mazzoli

Thu, 8 Jun 2000 13:37:14 -0700

34 lines

Re: Laminate condition

Anne Ledger

Thu, 8 Jun 2000 16:01:07 -0400

84 lines

Re: Laminate condition

Franklin D Asbell

Thu, 8 Jun 2000 14:14:29 -0500

60 lines

Re: Laminate condition

Hinners Hans Civ WRALC/LYPME

Thu, 8 Jun 2000 20:04:07 +0100

318 lines

Laminate condition

Barry Gallegos

Thu, 8 Jun 2000 12:14:04 -0600

235 lines

New Thread

LCD Design Bureaus

Re: LCD Design Bureaus

=?gb2312?B?vfC66A==?=

Sun, 4 Jun 2000 16:08:46 +0800

72 lines

New Thread

Lead Forming and Component Placement Questions

Re: Lead Forming and Component Placement Questions

Stephen R. Gregory

Thu, 8 Jun 2000 16:51:20 EDT

72 lines

Re: Lead Forming and Component Placement Questions

Terveen, James @ NARDAEAST

Thu, 8 Jun 2000 12:58:15 -0400

75 lines

Re: Lead Forming and Component Placement Questions

Collins, Graham

Thu, 8 Jun 2000 13:40:29 -0300

99 lines

Re: Lead Forming and Component Placement Questions

Doug Schancer

Thu, 8 Jun 2000 12:24:12 -0400

27 lines

Re: Lead Forming and Component Placement Questions

Phil Nutting

Thu, 8 Jun 2000 12:25:58 -0400

94 lines

Lead Forming and Component Placement Questions

Eric Kalgren

Thu, 8 Jun 2000 10:06:27 -0600

48 lines

New Thread

lead straightening procedure

Re: lead straightening procedure

Kasprzak, Bill (esd) USX

Tue, 13 Jun 2000 07:44:30 -0400

62 lines

Re: lead straightening procedure

d. terstegge

Tue, 13 Jun 2000 10:19:42 +0200

60 lines

lead straightening procedure

<Jason Smith>

Fri, 9 Jun 2000 15:25:37 -0400

25 lines

New Thread

Life stages

Re: Life stages

Dominic Gagnier

Tue, 20 Jun 2000 08:53:30 -0400

50 lines

Life stages

Cal Driscoll

Tue, 20 Jun 2000 08:30:49 -0400

756 lines

New Thread

Life stages virus

Re: Life stages virus

Kasprzak, Bill (esd) USX

Tue, 20 Jun 2000 14:18:29 -0400

72 lines

Re: Life stages virus

Timothy Reeves

Tue, 20 Jun 2000 10:33:16 -0700

42 lines

Re: Life stages virus

Ahne Oosterhof

Tue, 20 Jun 2000 09:19:59 -0700

104 lines

Re: Life stages virus

Geoff Layhe

Tue, 20 Jun 2000 16:59:37 +0100

66 lines

Re: Life stages virus

Chuck Brummer

Tue, 20 Jun 2000 08:28:54 -0700

61 lines

Re: Life stages virus

Jean-Francois Bissonnette

Tue, 20 Jun 2000 11:22:22 -0400

70 lines

Re: Life stages virus

Cal Driscoll

Tue, 20 Jun 2000 11:05:42 -0400

71 lines

Re: Life stages virus

Pat Diamond

Tue, 20 Jun 2000 16:02:34 +0100

66 lines

Life stages virus

West, Jim

Tue, 20 Jun 2000 10:25:30 -0400

36 lines

New Thread

Life stages virus detection

Re: Life stages virus detection

Ed Popielarski

Tue, 20 Jun 2000 21:42:12 -0700

176 lines

New Thread

Life stages virus, just a thought !!

Re: Life stages virus, just a thought !!

Matthew Lamkin

Wed, 28 Jun 2000 08:27:25 +0100

140 lines

Re: Life stages virus, just a thought !!

Ed Popielarski

Sat, 24 Jun 2000 07:35:20 -0700

143 lines

Re: Life stages virus, just a thought !!

Charlie Pitarys

Tue, 20 Jun 2000 13:56:51 -0400

75 lines

New Thread

Lifted Land was <No Subject>

Re: Lifted Land was <No Subject>

Chuck Brummer

Mon, 26 Jun 2000 11:48:31 -0700

79 lines

Re: Lifted Land was <No Subject>

george

Mon, 26 Jun 2000 10:09:31 -0400

75 lines

Re: Lifted Land was <No Subject>

Gerry Cooper

Fri, 23 Jun 2000 09:41:09 -0400

48 lines

Re: Lifted Land was <No Subject>

Alain Savard

Fri, 23 Jun 2000 08:08:05 -0400

54 lines

New Thread

Linewidth Question

Re: Linewidth Question

McMahon Sales

Fri, 30 Jun 2000 08:16:50 -0500

57 lines

Linewidth Question

Dave Hoover

Thu, 29 Jun 2000 16:22:52 -0700

32 lines

New Thread

Loaded board rework

Re: Loaded board rework

Paul Klasek

Tue, 13 Jun 2000 11:39:49 +1000

160 lines

Re: Loaded board rework

Peter Swanson

Fri, 9 Jun 2000 11:17:06 GMT

100 lines

Re: Loaded board rework

Edward J. Valentine

Thu, 8 Jun 2000 12:01:55 -0400

122 lines

Re: Loaded board rework

Mike Lang

Thu, 8 Jun 2000 09:13:17 -0400

42 lines

Re: Loaded board rework

Misner, Bruce

Thu, 8 Jun 2000 07:38:03 -0500

71 lines

Re: Loaded board rework

Howieson, Rick

Wed, 7 Jun 2000 20:37:56 -0600

94 lines

Re: Loaded board rework

Paul Klasek

Thu, 8 Jun 2000 12:36:27 +1000

135 lines

Re: Loaded board rework

Stephen R. Gregory

Wed, 7 Jun 2000 22:22:50 EDT

71 lines

Re: Loaded board rework

Ralph Richart

Wed, 7 Jun 2000 18:49:15 -0700

94 lines

Re: Loaded board rework

Stephen R. Gregory

Wed, 7 Jun 2000 21:38:54 EDT

89 lines

Re: Loaded board rework

Howieson, Rick

Wed, 7 Jun 2000 19:29:33 -0600

66 lines

Re: Loaded board rework

Paul Klasek

Thu, 8 Jun 2000 10:08:31 +1000

78 lines

Re: Loaded board rework

Stephen R. Gregory

Wed, 7 Jun 2000 19:45:17 EDT

56 lines

Loaded board rework

Ralph Richart

Wed, 7 Jun 2000 16:28:57 -0700

40 lines

New Thread

Looking for Information

Looking for Information

Mike Bailey

Wed, 21 Jun 2000 11:10:36 -0700

25 lines

New Thread

looking for prototype subcontractor

looking for prototype subcontractor

Steven Lustig

Wed, 28 Jun 2000 16:13:54 -0400

51 lines

New Thread

Loss of a Tech Netter

Re: Loss of a Tech Netter

Barry Gallegos

Thu, 8 Jun 2000 14:46:10 -0600

79 lines

Loss of a Tech Netter

Hinners Hans Civ WRALC/LYPME

Thu, 8 Jun 2000 21:20:24 +0100

47 lines

New Thread

Mask coming off again...repair recomendations.

Re: Mask coming off again...repair recomendations.

Brian Ellis

Wed, 14 Jun 2000 20:24:34 +0300

74 lines

Mask coming off again...repair recomendations.

Stephen R. Gregory

Wed, 14 Jun 2000 11:14:31 EDT

49 lines

New Thread

Materials for capacitors

Re: Materials for capacitors

Lou Hart

Thu, 8 Jun 2000 12:14:03 -0400

81 lines

Materials for capacitors

Jurgen Kruger

Thu, 8 Jun 2000 08:59:43 +0200

148 lines

New Thread

Materials Testing Laboratory

Re: Materials Testing Laboratory

Jim Gilbert

Thu, 1 Jun 2000 10:26:45 -0400

54 lines

Re: Materials Testing Laboratory

Richard Tilbrook

Thu, 1 Jun 2000 12:37:08 +0100

30 lines

Re: Materials Testing Laboratory

William Plumbridge

Thu, 1 Jun 2000 09:23:34 +0100

37 lines

Re: Materials Testing Laboratory

Jonathan A Noquil

Thu, 1 Jun 2000 16:25:35 +0800

61 lines

Materials Testing Laboratory

gina

Wed, 1 Jan 1997 06:24:19 +0800

27 lines

New Thread

Mercury Vapor vs.Metal Halide

Mercury Vapor vs.Metal Halide

Michael Lester

Thu, 1 Jun 2000 10:18:22 EDT

25 lines

New Thread

MIL question

MIL question

Ingemar Hernefjord (EMW)

Fri, 16 Jun 2000 14:56:53 +0200

28 lines

New Thread

MIL-2000A DIP lead clinch requirement?

Re: MIL-2000A DIP lead clinch requirement?

Mel Parrish

Fri, 2 Jun 2000 01:04:44 -0400

124 lines

Re: MIL-2000A DIP lead clinch requirement?

Kane, Joseph

Thu, 1 Jun 2000 16:46:30 -0400

95 lines

Re: MIL-2000A DIP lead clinch requirement?

Jan Satterfield

Thu, 1 Jun 2000 12:34:21 -0600

78 lines

MIL-2000A DIP lead clinch requirement?

Mike Sewell

Thu, 1 Jun 2000 10:41:40 EDT

47 lines

New Thread

MTC Tray Material?

Re: MTC Tray Material?

Lee Whiteman

Fri, 30 Jun 2000 12:02:38 -0400

74 lines

Re: MTC Tray Material?

Stephen R. Gregory

Thu, 29 Jun 2000 19:04:05 EDT

47 lines

MTC Tray Material?

Brad L. Matthies

Thu, 29 Jun 2000 11:17:54 -0500

33 lines

New Thread

Multi layer ceramic fab

Re: Multi layer ceramic fab

Sullivan, William

Wed, 14 Jun 2000 16:09:41 -0400

125 lines

Re: Multi layer ceramic fab

Houston, Terri

Wed, 14 Jun 2000 14:53:43 -0500

92 lines

Re: Multi layer ceramic fab

Mark Tucker

Wed, 14 Jun 2000 09:52:12 -0700

59 lines

Re: Multi layer ceramic fab

Stephen R. Gregory

Wed, 14 Jun 2000 12:30:38 EDT

51 lines

Multi layer ceramic fab

Sullivan, William

Wed, 14 Jun 2000 11:24:16 -0400

35 lines

New Thread

Need Component Placement Info

Re: Need Component Placement Info

Stephen R. Gregory

Fri, 16 Jun 2000 14:25:25 EDT

51 lines

Re: Need Component Placement Info

Kuczynski Michael

Fri, 16 Jun 2000 13:31:14 -0400

405 lines

Re: Need Component Placement Info

Stephen R. Gregory

Fri, 16 Jun 2000 13:53:17 EDT

46 lines

Re: Need Component Placement Info

Harold G. Bailey

Fri, 16 Jun 2000 13:50:25 -0400

31 lines

Re: Need Component Placement Info

Matthew Lamkin

Fri, 16 Jun 2000 16:23:51 +0100

53 lines

Need Component Placement Info

Harold G. Bailey

Fri, 16 Jun 2000 09:56:54 -0400

27 lines

New Thread

Need Flux neutralizer replacement

Re: Need Flux neutralizer replacement

Brian Ellis

Thu, 22 Jun 2000 10:58:23 +0300

56 lines

Need Flux neutralizer replacement

Richard MacCutcheon

Wed, 21 Jun 2000 13:19:04 -0600

34 lines

New Thread

New J-STD-001 B to C video

New J-STD-001 B to C video

Steve Donaldson

Fri, 2 Jun 2000 14:39:29 EDT

60 lines

New Thread

non-contact flying probe

Re: non-contact flying probe

joyce

Wed, 14 Jun 2000 19:49:10 -0400

96 lines

Re: non-contact flying probe

McMonagle, Mike

Mon, 12 Jun 2000 09:06:07 -0400

78 lines

Re: non-contact flying probe

Stephen R. Gregory

Fri, 9 Jun 2000 20:34:32 EDT

43 lines

non-contact flying probe

joyce

Fri, 9 Jun 2000 19:40:23 -0400

27 lines

New Thread

non-contact flying probe...more info

Re: non-contact flying probe...more info

Stephen R. Gregory

Fri, 9 Jun 2000 22:10:47 EDT

61 lines

Re: non-contact flying probe...more info

joyce

Fri, 9 Jun 2000 21:55:31 -0400

60 lines

Re: non-contact flying probe...more info

Stephen R. Gregory

Fri, 9 Jun 2000 21:23:07 EDT

45 lines

New Thread

Note from KEMET

Note from KEMET

Matthew P Henry/KEMET/US

Wed, 14 Jun 2000 16:42:19 -0400

32 lines

New Thread

OT Admin

Re: OT Admin

Tom Martin

Wed, 28 Jun 2000 11:09:25 -0400

61 lines

Re: OT Admin

Matthew Lamkin

Wed, 28 Jun 2000 15:11:14 +0100

69 lines

OT Admin

Brian Ellis

Wed, 28 Jun 2000 15:40:28 +0300

39 lines

New Thread

Other visual tests under a BGA possible?

Re: Other visual tests under a BGA possible?

Dieselberg, Ron

Wed, 7 Jun 2000 07:58:22 -0400

71 lines

Re: Other visual tests under a BGA possible?

Stephen R. Gregory

Tue, 6 Jun 2000 20:55:27 EDT

45 lines

Re: Other visual tests under a BGA possible?

Dieselberg, Ron

Mon, 5 Jun 2000 07:31:17 -0400

76 lines

Re: Other visual tests under a BGA possible?

Ingemar Hernefjord (EMW)

Tue, 6 Jun 2000 08:27:00 +0200

107 lines

Re: Other visual tests under a BGA possible?

Thorup, John

Mon, 5 Jun 2000 12:11:47 -0700

81 lines

Re: Other visual tests under a BGA possible?

Roger Mack

Mon, 5 Jun 2000 12:46:44 -0500

81 lines

Re: Other visual tests under a BGA possible?

Richard Tilbrook

Mon, 5 Jun 2000 15:12:27 +0100

40 lines

Re: Other visual tests under a BGA possible?

Ingemar Hernefjord (EMW)

Mon, 5 Jun 2000 14:58:54 +0200

85 lines

Re: Other visual tests under a BGA possible?

Ingemar Hernefjord (EMW)

Mon, 5 Jun 2000 14:55:47 +0200

70 lines

Re: Other visual tests under a BGA possible?

Jurgen Kruger

Mon, 5 Jun 2000 09:42:39 +0200

98 lines

Re: Other visual tests under a BGA possible?

d. terstegge

Mon, 5 Jun 2000 09:38:21 +0200

103 lines

Re: Other visual tests under a BGA possible?

Ivan Edwards

Mon, 5 Jun 2000 07:11:58 +0100

64 lines

Re: Other visual tests under a BGA possible?

Lee Whiteman

Fri, 2 Jun 2000 15:21:32 -0400

85 lines

Re: Other visual tests under a BGA possible?

Gabriela Bogdan

Fri, 2 Jun 2000 20:44:31 +0300

63 lines

Re: Other visual tests under a BGA possible?

Bev Christian

Fri, 2 Jun 2000 13:56:03 -0400

67 lines

Re: Other visual tests under a BGA possible?

Stephen R. Gregory

Fri, 2 Jun 2000 13:34:49 EDT

47 lines

Other visual tests under a BGA possible?

Jurgen Kruger

Fri, 2 Jun 2000 17:22:27 +0200

36 lines

New Thread

Out-of-Office Auto-Replies

Re: Out-of-Office Auto-Replies

Keach Sasamori

Wed, 28 Jun 2000 09:43:06 -0500

94 lines

New Thread

oval pin into oval hole

Re: oval pin into oval hole

Paul Klasek

Tue, 20 Jun 2000 09:13:04 +1000

240 lines

Re: oval pin into oval hole

Tom Martin

Mon, 19 Jun 2000 17:43:54 -0400

167 lines

Re: oval pin into oval hole

KK Chin

Mon, 19 Jun 2000 14:44:36 -0700

180 lines

Re: oval pin into oval hole

Phil Nutting

Mon, 19 Jun 2000 17:16:03 -0400

138 lines

Re: oval pin into oval hole

Tom Martin

Mon, 19 Jun 2000 16:48:37 -0400

100 lines

Re: oval pin into oval hole

Paul Klasek

Mon, 19 Jun 2000 08:32:40 +1000

104 lines

Re: oval pin into oval hole

Richard Hawkins

Fri, 16 Jun 2000 14:23:34 -0500

27 lines

Re: oval pin into oval hole

Phil Nutting

Fri, 16 Jun 2000 14:56:51 -0400

77 lines

oval pin into oval hole

Richard Hawkins

Fri, 16 Jun 2000 13:15:26 -0500

40 lines

New Thread

Package Reliabiity Testing.

Package Reliabiity Testing.

Stephen Ayotte

Thu, 22 Jun 2000 16:52:26 -0400

35 lines

New Thread

PADS format compatibility

Re: PADS format compatibility

Brian Ellis

Thu, 1 Jun 2000 09:38:26 +0300

132 lines

New Thread

Palladium > Nickel

Re: Palladium > Nickel

Nancy Trumbull

Thu, 15 Jun 2000 07:58:48 -0400

197 lines

Re: Palladium > Nickel

Nancy Trumbull

Thu, 15 Jun 2000 07:26:28 -0400

72 lines

Re: Palladium > Nickel

Ingemar Hernefjord (EMW)

Thu, 15 Jun 2000 09:05:01 +0200

74 lines

Re: Palladium > Nickel

Brian Ellis

Thu, 15 Jun 2000 09:20:12 +0300

72 lines

Re: Palladium > Nickel

John Maxwell

Wed, 14 Jun 2000 20:00:33 -0700

159 lines

Re: Palladium > Nickel

Paul Klasek

Thu, 15 Jun 2000 08:29:21 +1000

97 lines

Re: Palladium > Nickel

George Milad

Wed, 14 Jun 2000 16:36:06 EDT

36 lines

Re: Palladium > Nickel

Bev Christian

Wed, 14 Jun 2000 16:00:19 -0400

137 lines

Re: Palladium > Nickel

Wenger, George M (George)

Wed, 14 Jun 2000 15:16:49 -0400

101 lines

Palladium > Nickel

Nancy Trumbull

Wed, 14 Jun 2000 14:13:06 -0400

61 lines

New Thread

Palladium Barrier

Re: Palladium Barrier

Phil Crepeau

Thu, 29 Jun 2000 10:13:39 -0700

60 lines

Palladium Barrier

Victor Arghyrou

Thu, 29 Jun 2000 15:36:48 +0100

26 lines

New Thread

Palladium query

Re: Palladium query

David Hillman

Fri, 30 Jun 2000 08:13:10 -0500

91 lines

Re: Palladium query

Clive ffitch

Fri, 30 Jun 2000 10:11:16 +0100

90 lines

Re: Palladium query

Jonathan A Noquil

Tue, 27 Jun 2000 17:43:07 +0800

86 lines

Palladium query

Terry Exell

Tue, 27 Jun 2000 08:50:33 +0100

30 lines

New Thread

paper carrier tape thickness

paper carrier tape thickness

Ed Holton

Fri, 30 Jun 2000 11:21:43 -0400

35 lines

New Thread

PC401 Soldermask

Re: PC401 Soldermask

Barmuta, Mike

Wed, 14 Jun 2000 08:40:54 -0700

70 lines

Re: PC401 Soldermask

Roland Jaquet

Wed, 14 Jun 2000 06:39:23 +0200

86 lines

PC401 Soldermask

Mcmaster, Michael

Tue, 13 Jun 2000 17:05:11 -0700

31 lines

New Thread

PCB fab chemical question

Re: PCB fab chemical question

Hinners Hans Civ WRALC/LYPME

Thu, 22 Jun 2000 08:38:48 -0400

66 lines

Re: PCB fab chemical question

Brian Ellis

Thu, 22 Jun 2000 10:54:47 +0300

62 lines

Re: PCB fab chemical question

McCauley, Gary

Wed, 21 Jun 2000 17:30:03 -0400

75 lines

Re: PCB fab chemical question

Hans Shin

Wed, 21 Jun 2000 13:09:15 -0700

51 lines

PCB fab chemical question

Jerry Hartman

Wed, 21 Jun 2000 12:43:06 -0700

35 lines

New Thread

PCB Inspection

Re: PCB Inspection

John Brewer

Fri, 2 Jun 2000 13:39:54 -0400

35 lines

Re: PCB Inspection

Noble, Ed

Fri, 2 Jun 2000 07:44:04 -0400

73 lines

Re: PCB Inspection

Phil Crepeau

Thu, 1 Jun 2000 17:09:18 -0700

171 lines

Re: PCB Inspection

Phil Crepeau

Thu, 1 Jun 2000 17:00:42 -0700

171 lines

Re: PCB Inspection

Stephen R. Gregory

Thu, 1 Jun 2000 19:59:14 EDT

45 lines

Re: PCB Inspection

Paul Klasek

Fri, 2 Jun 2000 09:51:23 +1000

171 lines

Re: PCB Inspection

Howieson, Rick

Thu, 1 Jun 2000 17:24:13 -0600

142 lines

Re: PCB Inspection

Paul Klasek

Fri, 2 Jun 2000 09:03:49 +1000

118 lines

Re: PCB Inspection

Lou Hart

Thu, 1 Jun 2000 14:35:41 -0400

89 lines

Re: PCB Inspection

Gary Camac

Thu, 1 Jun 2000 12:41:18 -0500

129 lines

Re: PCB Inspection

Gabriela Bogdan

Thu, 1 Jun 2000 19:47:39 +0300

74 lines

Re: PCB Inspection

Darrel Therriault

Thu, 1 Jun 2000 10:04:28 -0700

81 lines

PCB Inspection

Michael Blackburn

Thu, 1 Jun 2000 12:01:11 -0400

43 lines

New Thread

PCB Inspection - Alain Savards reference.

Re: PCB Inspection - Alain Savards reference.

Gabriela Bogdan

Mon, 5 Jun 2000 18:54:49 +0300

128 lines

Re: PCB Inspection - Alain Savards reference.

Alain Savard

Mon, 5 Jun 2000 10:05:00 -0400

46 lines

Re: PCB Inspection - Alain Savards reference.

Ed Cosper

Mon, 5 Jun 2000 09:34:05 -0400

110 lines

New Thread

PCB Inspection Cos. In Asia

PCB Inspection Cos. In Asia

S. Miller

Tue, 20 Jun 2000 01:39:02 EDT

31 lines

New Thread

PCB Materials/Soldermask

Re: PCB Materials/Soldermask

Edward J. Valentine

Tue, 20 Jun 2000 09:12:15 -0400

85 lines

Re: PCB Materials/Soldermask

Brian Ellis

Tue, 20 Jun 2000 10:08:13 +0300

66 lines

PCB Materials/Soldermask

Alexis Meehan

Mon, 19 Jun 2000 10:06:39 -0700

40 lines

New Thread

PCB trace at high freq.

Re: PCB trace at high freq.

David Ricketts

Thu, 15 Jun 2000 15:08:35 -0700

76 lines

Re: PCB trace at high freq.

Brooks Bill

Thu, 15 Jun 2000 14:00:30 -0700

91 lines

PCB trace at high freq.

Tracy Black

Thu, 15 Jun 2000 12:52:36 -0700

39 lines

New Thread

PCBA Storage conditions?

PCBA Storage conditions?

Rick Thompson

Thu, 29 Jun 2000 09:15:00 -0700

40 lines

New Thread

PE: PCB Inspection

Re: PE: PCB Inspection

Alain Savard

Mon, 5 Jun 2000 08:44:28 -0400

70 lines

Re: PE: PCB Inspection

Gabriela Bogdan

Sat, 3 Jun 2000 07:43:19 +0300

185 lines

Re: PE: PCB Inspection

Howieson, Rick

Fri, 2 Jun 2000 13:39:31 -0600

159 lines

Re: PE: PCB Inspection

Alain Savard

Fri, 2 Jun 2000 14:46:35 -0400

129 lines

Re: PE: PCB Inspection

Ed Cosper

Fri, 2 Jun 2000 13:28:56 -0400

152 lines

Re: PE: PCB Inspection

Noble, Ed

Fri, 2 Jun 2000 12:01:08 -0400

82 lines

PE: PCB Inspection

John Brewer

Fri, 2 Jun 2000 11:09:43 -0400

49 lines

New Thread

plated thru hole solder fill

Re: plated thru hole solder fill

Werner Engelmaier

Fri, 16 Jun 2000 21:49:35 EDT

47 lines

plated thru hole solder fill

Jason Larson, AScT

Fri, 16 Jun 2000 10:43:38 -0700

32 lines

New Thread

Plating Thieving

Plating Thieving

<>

Wed, 14 Jun 2000 09:08:15 EDT

42 lines

New Thread

Prefag 3B

Re: Prefag 3B

Geoff Layhe

Fri, 30 Jun 2000 10:55:54 +0100

42 lines

Prefag 3B

Frank Davies

Fri, 30 Jun 2000 10:00:34 +0100

59 lines

New Thread

PROCESS/DESIGN GUIDELINES FOR STENCILS

Re: PROCESS/DESIGN GUIDELINES FOR STENCILS

Phillips, Peter (NM05)

Thu, 8 Jun 2000 14:15:57 -0500

72 lines

Re: PROCESS/DESIGN GUIDELINES FOR STENCILS

Kathy Jenczewski

Thu, 8 Jun 2000 14:34:07 -0500

69 lines

Re: PROCESS/DESIGN GUIDELINES FOR STENCILS

Barry Gallegos

Thu, 8 Jun 2000 13:23:13 -0600

68 lines

Re: PROCESS/DESIGN GUIDELINES FOR STENCILS

Jack Crawford

Thu, 8 Jun 2000 14:10:17 -0500

79 lines

PROCESS/DESIGN GUIDELINES FOR STENCILS

Steffen, Don E

Thu, 8 Jun 2000 13:26:26 -0500

34 lines

New Thread

PSGA

PSGA

Jonathan A Noquil

Wed, 28 Jun 2000 16:48:55 +0800

31 lines

New Thread

Pull Test for Glue Process

Re: Pull Test for Glue Process

Mike Fenner

Fri, 16 Jun 2000 10:33:56 +0100

119 lines

Re: Pull Test for Glue Process

Stephen R. Gregory

Wed, 14 Jun 2000 19:40:21 EDT

79 lines

Pull Test for Glue Process

Jorge A Rodriguez

Wed, 14 Jun 2000 16:40:39 -0600

39 lines

New Thread

PWB minimum thickness and bend radius

Re: PWB minimum thickness and bend radius

Chetan Shah

Sat, 10 Jun 2000 10:18:55 PDT

74 lines

Re: PWB minimum thickness and bend radius

Barbara Burcham

Fri, 9 Jun 2000 16:16:37 -0500

98 lines

Re: PWB minimum thickness and bend radius

Brooks Bill

Fri, 9 Jun 2000 13:54:45 -0700

68 lines

PWB minimum thickness and bend radius

Mark Tucker

Fri, 9 Jun 2000 13:14:04 -0700

33 lines

New Thread

PWB: Flex Circuit Testing: (see TM-650 m2.4.3.1)

Re: PWB: Flex Circuit Testing: (see TM-650 m2.4.3.1)

Werner Engelmaier

Fri, 23 Jun 2000 14:10:29 EDT

44 lines

New Thread

PWB: Flex Circuit Testing: Looking for Flexural Fatigue Tester for flex circuit materials (see TM-650 m2.4.3.1)

PWB: Flex Circuit Testing: Looking for Flexural Fatigue Tester for flex circuit materials (see TM-650 m2.4.3.1)

Maguire, James F

Wed, 21 Jun 2000 13:55:25 -0700

51 lines

New Thread

Quad feeder repairs

Quad feeder repairs

Roger Mack

Thu, 22 Jun 2000 11:54:41 -0500

31 lines

New Thread

Quad feeders

Quad feeders

Petrosky, Dennis J

Thu, 22 Jun 2000 16:03:03 -0400

27 lines

New Thread

question about pre-heat & SIR

Re: question about pre-heat & SIR

Brian Ellis

Fri, 9 Jun 2000 12:29:14 +0300

121 lines

Re: question about pre-heat & SIR

d. terstegge

Fri, 9 Jun 2000 10:24:37 +0200

132 lines

Re: question about pre-heat & SIR

Brian Ellis

Fri, 9 Jun 2000 10:39:17 +0300

76 lines

Re: question about pre-heat & SIR

Ryan Grant

Thu, 8 Jun 2000 15:28:37 -0600

91 lines

Re: question about pre-heat & SIR

Douglas Pauls

Thu, 8 Jun 2000 16:25:15 EDT

48 lines

question about pre-heat & SIR

Cara.Startek

Thu, 8 Jun 2000 15:39:04 -0400

29 lines

New Thread

Question about Zestron

Re: Question about Zestron

Steve Collins

Thu, 22 Jun 2000 07:20:57 -0600

24 lines

Re: Question about Zestron

Brian Ellis

Thu, 22 Jun 2000 10:44:26 +0300

68 lines

Re: Question about Zestron

Douglas Pauls

Wed, 21 Jun 2000 23:26:27 EDT

41 lines

Question about Zestron

Davis, Mary

Wed, 21 Jun 2000 17:42:40 -0700

42 lines

New Thread

Question regarding Immersion White Tin

Re: Question regarding Immersion White Tin

joyce

Fri, 16 Jun 2000 21:10:25 -0400

184 lines

Re: Question regarding Immersion White Tin

Bev Christian

Fri, 16 Jun 2000 08:13:24 -0400

66 lines

Re: Question regarding Immersion White Tin

Gabriela Bogdan

Fri, 16 Jun 2000 03:22:37 +0300

52 lines

Re: Question regarding Immersion White Tin

Franklin D Asbell

Thu, 15 Jun 2000 19:23:46 -0500

32 lines

Re: Question regarding Immersion White Tin

Stephen R. Gregory

Thu, 15 Jun 2000 19:47:08 EDT

162 lines

Re: Question regarding Immersion White Tin

Franklin D Asbell

Thu, 15 Jun 2000 18:12:55 -0500

30 lines

Re: Question regarding Immersion White Tin

Rich Edgar

Thu, 15 Jun 2000 18:15:25 EDT

40 lines

Re: Question regarding Immersion White Tin

Bev Christian

Thu, 15 Jun 2000 17:10:44 -0400

50 lines

Question regarding Immersion White Tin

Anthony Wong

Thu, 15 Jun 2000 14:59:04 -0700

73 lines

New Thread

R: [TN] info about creepage distance

R: [TN] info about creepage distance

Radaelli Roberto

Wed, 7 Jun 2000 19:11:23 +0200

46 lines

New Thread

RCC Foil Time-To-Delam Testing

Re: RCC Foil Time-To-Delam Testing

Ian McMillan

Wed, 14 Jun 2000 16:36:25 -0700

61 lines

Re: RCC Foil Time-To-Delam Testing

Werner Engelmaier

Wed, 14 Jun 2000 19:23:59 EDT

28 lines

RCC Foil Time-To-Delam Testing

Richard M Mazzoli

Wed, 14 Jun 2000 10:15:08 -0500

33 lines

New Thread

Reference Source for Design

Re: Reference Source for Design

joyce

Thu, 22 Jun 2000 19:31:35 -0400

124 lines

Re: Reference Source for Design

McGlaughlin, Jeffrey A

Thu, 22 Jun 2000 13:50:34 -0400

102 lines

New Thread

Reflective AOI systems

Re: Reflective AOI systems

Mcmaster, Michael

Wed, 7 Jun 2000 08:33:01 -0700

104 lines

Reflective AOI systems

Ed Cosper

Mon, 5 Jun 2000 09:54:23 -0400

145 lines

New Thread

Reflow Oven Causing Bridging???

Re: Reflow Oven Causing Bridging???

Gerry Savard

Mon, 26 Jun 2000 11:21:02 -0400

80 lines

Re: Reflow Oven Causing Bridging???

Ryan Grant

Mon, 26 Jun 2000 08:39:57 -0600

90 lines

Re: Reflow Oven Causing Bridging???

Phil Zarrow

Mon, 26 Jun 2000 10:26:02 EDT

49 lines

Reflow Oven Causing Bridging???

Brad L. Matthies

Mon, 26 Jun 2000 08:20:34 -0500

47 lines

New Thread

Reliability Prediction Methods

Re: Reliability Prediction Methods

Doug

Tue, 13 Jun 2000 22:28:22 -0700

36 lines

Re: Reliability Prediction Methods

David A. Douthit

Tue, 13 Jun 2000 17:39:50 -0700

31 lines

Re: Reliability Prediction Methods

Stephen R. Gregory

Tue, 13 Jun 2000 13:39:55 EDT

45 lines

Re: Reliability Prediction Methods

Kang Zhang

Tue, 13 Jun 2000 13:07:14 EDT

120 lines

Re: Reliability Prediction Methods

Kiiski Jarmo

Tue, 13 Jun 2000 09:54:31 +0300

71 lines

Re: Reliability Prediction Methods

Doug

Mon, 12 Jun 2000 23:32:10 -0700

85 lines

Reliability Prediction Methods

Kang Zhang

Tue, 13 Jun 2000 01:41:25 EDT

41 lines

New Thread

Removal from automatic notices

Removal from automatic notices

Terry Romine

Tue, 20 Jun 2000 09:35:04 -0400

24 lines

New Thread

Repeted : MIL question

Re: Repeted : MIL question

Ingemar Hernefjord (EMW)

Mon, 26 Jun 2000 11:17:08 +0200

95 lines

Re: Repeted : MIL question

Misner, Bruce

Thu, 22 Jun 2000 14:12:47 -0500

79 lines

Repeted : MIL question

Ingemar Hernefjord (EMW)

Wed, 21 Jun 2000 10:06:17 +0200

30 lines

New Thread

Request for Adhesive Information or Assistance

Re: Request for Adhesive Information or Assistance

Stephen R. Gregory

Fri, 30 Jun 2000 14:11:22 EDT

53 lines

Request for Adhesive Information or Assistance

Smith, Gary

Thu, 29 Jun 2000 12:02:57 -0400

40 lines

New Thread

Request for info.

Re: Request for info.

<Rudy Sedlak>

Thu, 22 Jun 2000 22:17:37 EDT

30 lines

Re: Request for info.

Anne Ledger

Thu, 22 Jun 2000 14:45:10 -0400

99 lines

Request for info.

Chuck Brummer

Thu, 22 Jun 2000 10:36:55 -0700

42 lines

New Thread

Resistor termination disappearing

Re: Resistor termination disappearing

David A. Douthit

Wed, 14 Jun 2000 19:42:57 -0700

89 lines

Re: Resistor termination disappearing

Stephen R. Gregory

Wed, 14 Jun 2000 22:17:05 EDT

59 lines

Re: Resistor termination disappearing

Ed Valentine

Wed, 14 Jun 2000 21:47:45 -0400

80 lines

Re: Resistor termination disappearing

Brooks Bill

Wed, 14 Jun 2000 16:34:44 -0700

66 lines

Resistor termination disappearing

Vernon Richard

Wed, 14 Jun 2000 18:12:13 -0500

38 lines

New Thread

Saponifiers and safety

Re: Saponifiers and safety

Alain Savard

Fri, 23 Jun 2000 10:29:21 -0400

76 lines

Re: Saponifiers and safety

Brian Ellis

Fri, 23 Jun 2000 17:25:56 +0300

71 lines

Re: Saponifiers and safety

<Rudy Sedlak>

Fri, 23 Jun 2000 09:25:32 EDT

33 lines

Re: Saponifiers and safety

Brian Ellis

Fri, 23 Jun 2000 12:04:37 +0300

51 lines

Re: Saponifiers and safety

<Rudy Sedlak>

Thu, 22 Jun 2000 22:20:37 EDT

28 lines

Re: Saponifiers and safety

Hans Shin

Thu, 22 Jun 2000 14:32:44 -0700

53 lines

Saponifiers and safety

Lou Hart

Thu, 22 Jun 2000 17:07:18 -0400

33 lines

New Thread

Scale Flow Test - Question

Re: Scale Flow Test - Question

Hinners Hans Civ WRALC/LYPME

Wed, 28 Jun 2000 18:43:07 +0100

47 lines

Re: Scale Flow Test - Question

Ian McMillan

Tue, 27 Jun 2000 14:55:32 -0700

82 lines

Re: Scale Flow Test - Question

Stoppel, Robert

Tue, 27 Jun 2000 14:46:03 -0600

85 lines

Re: Scale Flow Test - Question

Glenn Pelkey

Tue, 27 Jun 2000 13:59:06 PDT

62 lines

Scale Flow Test - Question

Hinners Hans Civ WRALC/LYPME

Tue, 27 Jun 2000 21:09:15 +0100

54 lines

New Thread

Scaling on PBGA Balls after reflow.

Re: Scaling on PBGA Balls after reflow.

Ryan Grant

Tue, 13 Jun 2000 09:43:56 -0600

72 lines

Re: Scaling on PBGA Balls after reflow.

David Hillman

Tue, 13 Jun 2000 08:21:54 -0500

86 lines

Re: Scaling on PBGA Balls after reflow.

Stephen R. Gregory

Mon, 12 Jun 2000 20:01:57 EDT

63 lines

Scaling on PBGA Balls after reflow.

Dave Simmons

Tue, 13 Jun 2000 08:28:45 +1200

64 lines

New Thread

SHOCK TESTING

Re: SHOCK TESTING

David Fish

Tue, 27 Jun 2000 14:00:01 -0700

59 lines

SHOCK TESTING

Brunker Ed

Tue, 27 Jun 2000 17:49:44 +0100

31 lines

New Thread

Short on 098-0114-002 Fabs.

Re: Short on 098-0114-002 Fabs.

Ken Patel

Fri, 9 Jun 2000 13:55:29 -0700

103 lines

New Thread

sign off technet

sign off technet

Ian Young

Fri, 9 Jun 2000 10:14:17 +0100

23 lines

New Thread

Silver migration

Re: Silver migration

Tom Martin

Wed, 21 Jun 2000 15:56:52 -0400

27 lines

Re: Silver migration

Ingemar Hernefjord (EMW)

Wed, 21 Jun 2000 08:36:42 +0200

148 lines

Re: Silver migration

Joseph Ng

Tue, 20 Jun 2000 23:01:10 +0800

138 lines

Re: Silver migration

Ingemar Hernefjord (EMW)

Tue, 20 Jun 2000 14:59:04 +0200

94 lines

Re: Silver migration

Matthew Lamkin

Mon, 19 Jun 2000 10:15:49 +0100

68 lines

Re: Silver migration

Ingemar Hernefjord (EMW)

Mon, 19 Jun 2000 10:20:36 +0200

24 lines

New Thread

Silver migration articles

Re: Silver migration articles

Tong HH

Sun, 18 Jun 2000 14:54:54 +0800

99 lines

Re: Silver migration articles

Ryan Grant

Fri, 16 Jun 2000 14:39:00 -0600

72 lines

Silver migration articles

Ingemar Hernefjord (EMW)

Thu, 15 Jun 2000 11:56:37 +0200

32 lines

New Thread

Single sided PWB

Re: Single sided PWB

Phillips, Peter (NM05)

Fri, 16 Jun 2000 16:04:39 -0500

107 lines

Re: Single sided PWB

Timothy Reeves

Fri, 16 Jun 2000 11:40:53 -0700

76 lines

Re: Single sided PWB

Phillips, Peter (NM05)

Fri, 16 Jun 2000 10:05:14 -0500

62 lines

Single sided PWB

Scott B. Westheimer

Fri, 16 Jun 2000 10:33:55 +0800

71 lines

New Thread

SIR test question...

SIR test question...

Cara.Startek

Fri, 16 Jun 2000 16:55:47 -0400

49 lines

New Thread

SMT Components

Re: SMT Components

Ryan Grant

Thu, 1 Jun 2000 09:13:12 -0600

80 lines

New Thread

SMT Reels Issues.

Re: SMT Reels Issues.

Jon Moore

Fri, 30 Jun 2000 14:58:27 EDT

38 lines

Re: SMT Reels Issues.

Gary Camac

Tue, 27 Jun 2000 07:33:40 -0500

128 lines

Re: SMT Reels Issues.

d. terstegge

Tue, 27 Jun 2000 14:04:25 +0200

119 lines

Re: SMT Reels Issues.

Stephen R. Gregory

Mon, 26 Jun 2000 20:39:33 EDT

76 lines

SMT Reels Issues.

Monica Mihai

Mon, 26 Jun 2000 19:06:39 -0400

92 lines

New Thread

SNEC meeting

SNEC meeting

Gary Ferrari

Mon, 12 Jun 2000 10:52:19 EDT

69 lines

New Thread

Solder ball test

Solder ball test

Joseph H. Smith

Wed, 21 Jun 2000 12:26:51 +0800

44 lines

New Thread

Solder Fill

Re: Solder Fill

Jean-Francois Bissonnette

Mon, 12 Jun 2000 15:16:54 -0400

116 lines

Re: Solder Fill

Dieselberg, Ron

Mon, 12 Jun 2000 08:57:21 -0400

71 lines

Re: Solder Fill

Werner Engelmaier

Fri, 9 Jun 2000 15:04:08 EDT

37 lines

Re: Solder Fill

Edward J. Valentine

Fri, 9 Jun 2000 13:37:33 -0400

89 lines

Solder Fill

Jim Gilbert

Fri, 9 Jun 2000 09:03:18 -0400

42 lines

New Thread

Solder Mask & ENIG

Solder Mask & ENIG

CHONG,CHEE-LEONG (A-Malaysia,ex1)

Sat, 1 Jul 2000 09:29:19 +0800

47 lines

New Thread

Solder on gold finger

Solder on gold finger

Joseph H. Smith

Wed, 28 Jun 2000 13:48:39 +0800

50 lines

New Thread

Solder pot temp.

Re: Solder pot temp.

<Joseph M. Webb>

Thu, 8 Jun 2000 13:25:07 -0400

32 lines

Solder pot temp.

Ryan Jennens

Thu, 8 Jun 2000 13:17:44 -0400

87 lines

New Thread

Solder Touch-up of probe marks

Re: Solder Touch-up of probe marks

Kelly M. Schriver

Thu, 22 Jun 2000 18:25:43 -0500

81 lines

Re: Solder Touch-up of probe marks

Brian Ellis

Thu, 22 Jun 2000 14:16:26 +0300

61 lines

Solder Touch-up of probe marks

Kasprzak, Bill (esd) USX

Thu, 22 Jun 2000 07:00:57 -0400

36 lines

New Thread

SolderMask SIRPI

Re: SolderMask SIRPI

Stephen R. Gregory

Mon, 5 Jun 2000 20:18:40 EDT

52 lines

SolderMask SIRPI

Tom Burek

Mon, 5 Jun 2000 19:29:08 -0400

29 lines

New Thread

SOLVENT's OCCUPATIONAL SAFETY

Re: SOLVENT's OCCUPATIONAL SAFETY

John Sharp

Mon, 26 Jun 2000 08:51:00 -0400

114 lines

Re: SOLVENT's OCCUPATIONAL SAFETY

Brian Ellis

Sun, 25 Jun 2000 17:19:08 +0300

70 lines

SOLVENT's OCCUPATIONAL SAFETY

JACOB MOZEL

Sun, 25 Jun 2000 12:07:54 +0200

87 lines

New Thread

Stencil Guidelines

Stencil Guidelines

Jack Crawford

Thu, 1 Jun 2000 17:26:42 -0500

68 lines

New Thread

still confused

Re: still confused

Paul Klasek

Tue, 13 Jun 2000 09:56:46 +1000

131 lines

Re: still confused

Brooks Bill

Fri, 9 Jun 2000 09:00:20 -0700

119 lines

Re: still confused

Gfranck

Fri, 9 Jun 2000 10:12:15 -0400

35 lines

Re: still confused

Ryan Grant

Fri, 9 Jun 2000 08:10:38 -0600

118 lines

Re: still confused

Brian Ellis

Fri, 9 Jun 2000 11:07:17 +0300

80 lines

Re: still confused

Keel, Mike

Thu, 8 Jun 2000 17:37:17 -0700

372 lines

Re: still confused

<>

Thu, 8 Jun 2000 17:21:32 -0700

55 lines

Re: still confused

Paul Klasek

Fri, 9 Jun 2000 10:05:55 +1000

287 lines

Re: still confused

Ralph Richart

Thu, 8 Jun 2000 16:26:50 -0700

244 lines

Re: still confused

joyce

Thu, 8 Jun 2000 19:24:54 -0400

121 lines

Re: still confused

Paul Klasek

Fri, 9 Jun 2000 08:57:40 +1000

218 lines

Re: still confused

Brooks Bill

Thu, 8 Jun 2000 15:50:32 -0700

225 lines

Re: still confused

Howieson, Rick

Thu, 8 Jun 2000 16:33:29 -0600

171 lines

Re: still confused

Ryan Grant

Thu, 8 Jun 2000 16:15:08 -0600

173 lines

Re: still confused

Brooks Bill

Thu, 8 Jun 2000 15:04:23 -0700

179 lines

Re: still confused

Ralph Richart

Thu, 8 Jun 2000 14:32:30 -0700

93 lines

Re: still confused

David Hillman

Thu, 8 Jun 2000 16:02:47 -0500

72 lines

Re: still confused

Brooks Bill

Thu, 8 Jun 2000 12:19:03 -0700

191 lines

Re: still confused

Alain Savard

Thu, 8 Jun 2000 14:57:34 -0400

144 lines

Re: still confused

Ryan Grant

Thu, 8 Jun 2000 12:27:51 -0600

94 lines

Re: still confused

Brooks Bill

Thu, 8 Jun 2000 11:25:33 -0700

110 lines

Re: still confused

Beerman, Dennis

Thu, 8 Jun 2000 12:57:40 -0500

146 lines

Re: still confused

Howieson, Rick

Thu, 8 Jun 2000 11:50:29 -0600

109 lines

Re: still confused

Phil Bavaro

Thu, 8 Jun 2000 10:44:21 -0700

99 lines

Re: still confused

Kenneth Kirby

Thu, 8 Jun 2000 12:25:50 -0500

154 lines

Re: still confused

Alain Savard

Thu, 8 Jun 2000 13:11:43 -0400

57 lines

Re: still confused

Alain Savard

Thu, 8 Jun 2000 13:09:06 -0400

74 lines

still confused

Ralph Richart

Thu, 8 Jun 2000 09:55:26 -0700

52 lines

New Thread

stretch and shrinkage of bare boards

Re: stretch and shrinkage of bare boards

Alain Savard

Tue, 13 Jun 2000 07:27:28 -0400

52 lines

Re: stretch and shrinkage of bare boards

Doug Jeffery

Tue, 13 Jun 2000 06:21:46 -0500

71 lines

stretch and shrinkage of bare boards

d. terstegge

Tue, 13 Jun 2000 09:53:26 +0200

40 lines

New Thread

Stripper Chemistries

Re: Stripper Chemistries

<>

Tue, 20 Jun 2000 02:30:51 EDT

34 lines

Re: Stripper Chemistries

Ted Stern

Mon, 19 Jun 2000 18:23:18 -0500

93 lines

Re: Stripper Chemistries

<Rudy Sedlak>

Mon, 19 Jun 2000 18:11:53 EDT

52 lines

Stripper Chemistries

Chuck Brummer

Mon, 19 Jun 2000 13:36:26 -0700

40 lines

New Thread

Surface Mount Equipment

Re: Surface Mount Equipment

d. terstegge

Mon, 26 Jun 2000 14:46:30 +0200

112 lines

Re: Surface Mount Equipment

Cal Driscoll

Mon, 26 Jun 2000 08:10:59 -0400

80 lines

Surface Mount Equipment

Jack Petyak

Sun, 25 Jun 2000 20:14:33 -0700

35 lines

New Thread

Surface Roughness Measurement

Re: Surface Roughness Measurement

Ingemar Hernefjord (EMW)

Tue, 27 Jun 2000 08:36:38 +0200

94 lines

Re: Surface Roughness Measurement

David Fish

Mon, 26 Jun 2000 20:54:40 -0700

59 lines

Surface Roughness Measurement

Olsen, Richard

Mon, 26 Jun 2000 13:59:58 -0400

35 lines

New Thread

Symantec (Norton Anti-virus) Provides Fix Tool for Fast-spreading VBS.STAGES.A Worm

Symantec (Norton Anti-virus) Provides Fix Tool for Fast-spreading VBS.STAGES.A Worm

Walt Custer

Tue, 20 Jun 2000 07:15:37 -0700

60 lines

New Thread

Ta: wirebonding and EFO

Re: Ta: wirebonding and EFO

Creswick

Sun, 11 Jun 2000 07:32:22 -0500

78 lines

Ta: wirebonding and EFO

Ingemar Hernefjord (EMW)

Thu, 8 Jun 2000 11:58:40 +0200

28 lines

New Thread

TechNet Digest - 28 Jun 2000 to 29 Jun 2000 - Special issue (#2000-406)

Re: TechNet Digest - 28 Jun 2000 to 29 Jun 2000 - Special issue (#2000-406)

Matthew Lamkin

Fri, 30 Jun 2000 08:18:28 +0100

78 lines

New Thread

Termination/Soldering Combination

Re: Termination/Soldering Combination

Dieselberg, Ron

Mon, 26 Jun 2000 06:18:25 -0400

66 lines

Re: Termination/Soldering Combination

Stephen R. Gregory

Thu, 22 Jun 2000 20:40:09 EDT

52 lines

Re: Termination/Soldering Combination

Edward J. Valentine

Thu, 22 Jun 2000 19:17:14 -0400

75 lines

Termination/Soldering Combination

Chafin, Ken G.

Thu, 22 Jun 2000 17:45:33 -0400

36 lines

New Thread

Tg

Re: Tg

Ian Hanna

Wed, 21 Jun 2000 13:12:23 -0400

97 lines

Re: Tg

Kang Zhang

Wed, 21 Jun 2000 12:06:10 EDT

69 lines

Re: Tg

Brad L. Matthies

Tue, 20 Jun 2000 17:57:41 -0500

57 lines

Tg

LI YUAN

Tue, 20 Jun 2000 11:28:23 -0600

34 lines

New Thread

Thermal Profiling

Re: Thermal Profiling

Jon Moore

Fri, 16 Jun 2000 16:29:27 EDT

36 lines

Re: Thermal Profiling

Tony DiMauro

Thu, 8 Jun 2000 09:38:24 -0700

135 lines

Re: Thermal Profiling

Lee Whiteman

Wed, 7 Jun 2000 17:15:26 -0400

248 lines

Re: Thermal Profiling

Luis Alcantra

Wed, 7 Jun 2000 07:06:00 -0700

43 lines

Thermal Profiling

Barry Gallegos

Tue, 6 Jun 2000 15:49:55 -0600

164 lines

New Thread

Thermal shock profile

Re: Thermal shock profile

Werner Engelmaier

Fri, 23 Jun 2000 14:10:33 EDT

44 lines

Re: Thermal shock profile

fraley , barrie

Thu, 22 Jun 2000 15:04:10 -0400

236 lines

Re: Thermal shock profile

Brent Stayer

Thu, 22 Jun 2000 14:05:36 -0400

157 lines

Thermal shock profile

Ken Patel

Thu, 22 Jun 2000 09:54:21 -0700

41 lines

New Thread

This is a reminder that all IPC e-mail forums will be down for approximately two hours between 2:00

This is a reminder that all IPC e-mail forums will be down for approximately two hours between 2:00

Keach Sasamori

Fri, 30 Jun 2000 08:44:43 -0500

49 lines

New Thread

To be Lead-Free

To be Lead-Free

Dewey Whittaker

Mon, 12 Jun 2000 15:08:40 -0700

70 lines

New Thread

To X-ray or Not to X-ray.

Re: To X-ray or Not to X-ray.

Darrel Therriault

Sat, 3 Jun 2000 09:56:19 -0700

216 lines

Re: To X-ray or Not to X-ray.

Gabriela Bogdan

Sat, 3 Jun 2000 08:33:14 +0300

150 lines

Re: To X-ray or Not to X-ray.

joyce

Fri, 2 Jun 2000 18:04:04 -0400

113 lines

Re: To X-ray or Not to X-ray.

David Hillman

Fri, 2 Jun 2000 15:25:37 -0500

66 lines

Re: To X-ray or Not to X-ray.

Stephen R. Gregory

Fri, 2 Jun 2000 12:59:21 EDT

87 lines

Re: To X-ray or Not to X-ray.

Gabriela Bogdan

Fri, 2 Jun 2000 18:33:16 +0300

133 lines

Re: To X-ray or Not to X-ray.

Stephen R. Gregory

Fri, 2 Jun 2000 10:53:47 EDT

54 lines

Re: To X-ray or Not to X-ray.

David Hillman

Thu, 1 Jun 2000 11:14:09 -0500

110 lines

Re: To X-ray or Not to X-ray.

Mike Lang

Thu, 1 Jun 2000 15:01:50 -0400

60 lines

Re: To X-ray or Not to X-ray.

Paul Klasek

Thu, 1 Jun 2000 16:14:25 +1000

131 lines

New Thread

Tombstoning and missing parts on 0805 Resistors

Re: Tombstoning and missing parts on 0805 Resistors

Jon Moore

Tue, 13 Jun 2000 15:44:46 EDT

31 lines

New Thread

Tooltronics Ultraclean II repair?

Re: Tooltronics Ultraclean II repair?

Hinners Hans Civ WRALC/LYPME

Thu, 8 Jun 2000 13:57:20 -0400

89 lines

Tooltronics Ultraclean II repair?

Rick Thompson

Thu, 8 Jun 2000 10:23:15 -0700

38 lines

New Thread

TVS vs Varistor

TVS vs Varistor

Jason Larson, AScT

Mon, 5 Jun 2000 12:07:35 -0700

32 lines

New Thread

unsubscribe

unsubscribe

Jason Gregory

Mon, 19 Jun 2000 11:29:57 -0500

21 lines

unsubscribe

Smith-BCD, Richard

Fri, 16 Jun 2000 15:22:47 -0500

24 lines

New Thread

V-score depth

Re: V-score depth

Timothy Reeves

Thu, 29 Jun 2000 10:08:11 -0700

76 lines

Re: V-score depth

Tony DiMauro

Thu, 22 Jun 2000 10:39:14 -0700

86 lines

Re: V-score depth

Mark Simmons

Thu, 22 Jun 2000 10:40:30 -0700

222 lines

Re: V-score depth

Mark Simmons

Thu, 22 Jun 2000 10:28:05 -0700

101 lines

Re: V-score depth

Brooks Bill

Thu, 22 Jun 2000 09:48:15 -0700

198 lines

Re: V-score depth

Tom Martin

Thu, 22 Jun 2000 12:10:52 -0400

75 lines

Re: V-score depth

Mark Simmons

Thu, 22 Jun 2000 08:58:55 -0700

141 lines

Re: V-score depth

Beerman, Dennis

Thu, 22 Jun 2000 06:49:44 -0500

100 lines

Re: V-score depth

Joseph E. J. Duclos Jr.

Wed, 21 Jun 2000 23:01:40 -0400

67 lines

Re: V-score depth

Stephen R. Gregory

Wed, 21 Jun 2000 12:39:43 EDT

51 lines

Re: V-score depth

Brooks Bill

Wed, 21 Jun 2000 08:27:26 -0700

113 lines

V-score depth

Ryan Jennens

Wed, 21 Jun 2000 11:07:16 -0400

38 lines

New Thread

V-Score--stress

Re: V-Score--stress

Martin Christie

Fri, 2 Jun 2000 09:04:00 +0100

248 lines

Re: V-Score--stress

KK Chin

Thu, 1 Jun 2000 18:53:39 -0700

131 lines

Re: V-Score--stress

Edward J. Valentine

Thu, 1 Jun 2000 21:11:20 -0400

91 lines

Re: V-Score--stress

Paul Klasek

Fri, 2 Jun 2000 08:44:16 +1000

72 lines

Re: V-Score--stress

Paul Klasek

Fri, 2 Jun 2000